[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210519074934.20712-6-quan@os.amperecomputing.com>
Date: Wed, 19 May 2021 14:49:32 +0700
From: Quan Nguyen <quan@...amperecomputing.com>
To: Corey Minyard <minyard@....org>, Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Brendan Higgins <brendanhiggins@...gle.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Wolfram Sang <wsa@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
openipmi-developer@...ts.sourceforge.net,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org
Cc: Open Source Submission <patches@...erecomputing.com>,
Phong Vo <phong@...amperecomputing.com>,
"Thang Q . Nguyen" <thang@...amperecomputing.com>,
openbmc@...ts.ozlabs.org
Subject: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Slave i2c device on AST2500 received a lot of slave irq while it is
busy processing the response. To handle this case, adds and exports
aspeed_set_slave_busy() for controller to temporary stop slave irq
while slave is handling the response, and re-enable them again when
the response is ready.
Signed-off-by: Quan Nguyen <quan@...amperecomputing.com>
---
v3:
+ First introduce in v3 [Quan]
drivers/i2c/busses/i2c-aspeed.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index b2e9c8f0ddf7..9926d04831a2 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -944,6 +944,26 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
return 0;
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy)
+{
+ struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+ unsigned long current_mask, flags;
+
+ spin_lock_irqsave(&bus->lock, flags);
+
+ current_mask = readl(bus->base + ASPEED_I2C_INTR_CTRL_REG);
+ if (busy)
+ current_mask &= ~(ASPEED_I2CD_INTR_RX_DONE | ASPEED_I2CD_INTR_SLAVE_MATCH);
+ else
+ current_mask |= ASPEED_I2CD_INTR_RX_DONE | ASPEED_I2CD_INTR_SLAVE_MATCH;
+ writel(current_mask, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+ spin_unlock_irqrestore(&bus->lock, flags);
+}
+EXPORT_SYMBOL_GPL(aspeed_set_slave_busy);
+#endif
+
static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
{
struct platform_device *pdev = to_platform_device(bus->dev);
--
2.28.0
Powered by blists - more mailing lists