| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210519080627.sfs74d2zxopkarfl@pali>
Date: Wed, 19 May 2021 10:06:27 +0200
From: Pali Rohár <pali@...nel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Russell King <rmk+kernel@...linux.org.uk>,
Marek Behún <kabel@...nel.org>,
Remi Pommarel <repk@...plefau.lt>, Xogium <contact@...ium.me>,
Tomasz Maciej Nowak <tmn505@...il.com>,
Marc Zyngier <maz@...nel.org>, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 01/42] PCI: aardvark: Fix kernel panic during PIO transfer
On Thursday 06 May 2021 17:31:12 Pali Rohár wrote:
> Trying to start a new PIO transfer by writing value 0 in PIO_START register
> when previous transfer has not yet completed (which is indicated by value 1
> in PIO_START) causes an External Abort on CPU, which results in kernel
> panic:
>
> SError Interrupt on CPU0, code 0xbf000002 -- SError
> Kernel panic - not syncing: Asynchronous SError Interrupt
>
> To prevent kernel panic, it is required to reject a new PIO transfer when
> previous one has not finished yet.
>
> If previous PIO transfer is not finished yet, the kernel may issue a new
> PIO request only if the previous PIO transfer timed out.
>
> In the past the root cause of this issue was incorrectly identified (as it
> often happens during link retraining or after link down event) and special
> hack was implemented in Trusted Firmware to catch all SError events in EL3,
> to ignore errors with code 0xbf000002 and not forwarding any other errors
> to kernel and instead throw panic from EL3 Trusted Firmware handler.
>
> Links to discussion and patches about this issue:
> https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
> https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/
> https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/
> https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
>
> But the real cause was the fact that during link retraning or after link
> down event the PIO transfer may take longer time, up to the 1.44s until it
> times out. This increased probability that a new PIO transfer would be
> issued by kernel while previous one has not finished yet.
>
> After applying this change into the kernel, it is possible to revert the
> mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
>
> Signed-off-by: Pali Rohár <pali@...nel.org>
> Reviewed-by: Marek Behún <kabel@...nel.org>
> Cc: stable@...r.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
Hello! Could you please review at least this patch? It is fixing kernel
panic and to prevent future kernel crashes I would really suggest to
merge this one patch into 5.13 queue.
> ---
> drivers/pci/controller/pci-aardvark.c | 49 ++++++++++++++++++++++-----
> 1 file changed, 40 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 051b48bd7985..e3f5e7ab7606 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -514,7 +514,7 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
> udelay(PIO_RETRY_DELAY);
> }
>
> - dev_err(dev, "config read/write timed out\n");
> + dev_err(dev, "PIO read/write transfer time out\n");
> return -ETIMEDOUT;
> }
>
> @@ -657,6 +657,35 @@ static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
> return true;
> }
>
> +static bool advk_pcie_pio_is_running(struct advk_pcie *pcie)
> +{
> + struct device *dev = &pcie->pdev->dev;
> +
> + /*
> + * Trying to start a new PIO transfer when previous has not completed
> + * cause External Abort on CPU which results in kernel panic:
> + *
> + * SError Interrupt on CPU0, code 0xbf000002 -- SError
> + * Kernel panic - not syncing: Asynchronous SError Interrupt
> + *
> + * Functions advk_pcie_rd_conf() and advk_pcie_wr_conf() are protected
> + * by raw_spin_lock_irqsave() at pci_lock_config() level to prevent
> + * concurrent calls at the same time. But because PIO transfer may take
> + * about 1.5s when link is down or card is disconnected, it means that
> + * advk_pcie_wait_pio() does not always have to wait for completion.
> + *
> + * Some versions of ARM Trusted Firmware handles this External Abort at
> + * EL3 level and mask it to prevent kernel panic. Relevant TF-A commit:
> + * https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
> + */
> + if (advk_readl(pcie, PIO_START)) {
> + dev_err(dev, "Previous PIO read/write transfer is still running\n");
> + return true;
> + }
> +
> + return false;
> +}
> +
> static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> int where, int size, u32 *val)
> {
> @@ -673,9 +702,10 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> return pci_bridge_emul_conf_read(&pcie->bridge, where,
> size, val);
>
> - /* Start PIO */
> - advk_writel(pcie, 0, PIO_START);
> - advk_writel(pcie, 1, PIO_ISR);
> + if (advk_pcie_pio_is_running(pcie)) {
> + *val = 0xffffffff;
> + return PCIBIOS_SET_FAILED;
> + }
>
> /* Program the control register */
> reg = advk_readl(pcie, PIO_CTRL);
> @@ -694,7 +724,8 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> /* Program the data strobe */
> advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
>
> - /* Start the transfer */
> + /* Clear PIO DONE ISR and start the transfer */
> + advk_writel(pcie, 1, PIO_ISR);
> advk_writel(pcie, 1, PIO_START);
>
> ret = advk_pcie_wait_pio(pcie);
> @@ -734,9 +765,8 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> if (where % size)
> return PCIBIOS_SET_FAILED;
>
> - /* Start PIO */
> - advk_writel(pcie, 0, PIO_START);
> - advk_writel(pcie, 1, PIO_ISR);
> + if (advk_pcie_pio_is_running(pcie))
> + return PCIBIOS_SET_FAILED;
>
> /* Program the control register */
> reg = advk_readl(pcie, PIO_CTRL);
> @@ -763,7 +793,8 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> /* Program the data strobe */
> advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
>
> - /* Start the transfer */
> + /* Clear PIO DONE ISR and start the transfer */
> + advk_writel(pcie, 1, PIO_ISR);
> advk_writel(pcie, 1, PIO_START);
>
> ret = advk_pcie_wait_pio(pcie);
> --
> 2.20.1
>
Powered by blists - more mailing lists