| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+HBbNE2E8jEnLhGE-Z3qqYFS99TnCMdS7m8rfum1MbPX+-=bw@mail.gmail.com>
Date: Wed, 19 May 2021 14:01:44 +0200
From: Robert Marko <robert.marko@...tura.hr>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Lee Jones <lee.jones@...aro.org>, robh+dt@...nel.org,
Linus Walleij <linus.walleij@...aro.org>,
bgolaszewski@...libre.com, jdelvare@...e.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-hwmon@...r.kernel.org,
Luka Perkov <luka.perkov@...tura.hr>, jmp@...phyte.org,
Paul Menzel <pmenzel@...gen.mpg.de>,
Donald Buczek <buczek@...gen.mpg.de>
Subject: Re: [PATCH 4/6] hwmon: Add Delta TN48M CPLD HWMON driver
On Fri, Apr 30, 2021 at 3:12 PM Guenter Roeck <linux@...ck-us.net> wrote:
>
> On 4/30/21 5:35 AM, Robert Marko wrote:
> > Delta TN48M has a CPLD that also monitors the power supply
> > statuses.
> >
> > These are useful to be presented to the users, so lets
> > add a driver for HWMON part of the CPLD.
> >
> > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > ---
> > drivers/hwmon/Kconfig | 10 +++
> > drivers/hwmon/Makefile | 1 +
> > drivers/hwmon/tn48m-hwmon.c | 148 ++++++++++++++++++++++++++++++++++++
> > drivers/mfd/tn48m-cpld.c | 3 +
> > include/linux/mfd/tn48m.h | 1 +
> > 5 files changed, 163 insertions(+)
> > create mode 100644 drivers/hwmon/tn48m-hwmon.c
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 54f04e61fb83..89271dfeb775 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1924,6 +1924,16 @@ config SENSORS_TMP513
> > This driver can also be built as a module. If so, the module
> > will be called tmp513.
> >
> > +config SENSORS_TN48M
> > + tristate "Delta Networks TN48M switch CPLD HWMON driver"
> > + depends on MFD_TN48M_CPLD
> > + help
> > + If you say yes here you get support for Delta Networks TN48M
> > + CPLD.
> > +
> > + This driver can also be built as a module. If so, the module
> > + will be called tn48m-hwmon.
> > +
> > config SENSORS_VEXPRESS
> > tristate "Versatile Express"
> > depends on VEXPRESS_CONFIG
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index fe38e8a5c979..22e470057ffe 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -187,6 +187,7 @@ obj-$(CONFIG_SENSORS_TMP108) += tmp108.o
> > obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
> > obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
> > obj-$(CONFIG_SENSORS_TMP513) += tmp513.o
> > +obj-$(CONFIG_SENSORS_TN48M) += tn48m-hwmon.o
> > obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o
> > obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
> > obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
> > diff --git a/drivers/hwmon/tn48m-hwmon.c b/drivers/hwmon/tn48m-hwmon.c
> > new file mode 100644
> > index 000000000000..80fd18d74f1d
> > --- /dev/null
> > +++ b/drivers/hwmon/tn48m-hwmon.c
> > @@ -0,0 +1,148 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Delta TN48M CPLD HWMON driver
> > + *
> > + * Copyright 2020 Sartura Ltd
> > + *
> > + * Author: Robert Marko <robert.marko@...tura.hr>
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <linux/mfd/tn48m.h>
> > +
> > +#define PSU1_PRESENT_MASK BIT(0)
> > +#define PSU2_PRESENT_MASK BIT(1)
> > +#define PSU1_POWERGOOD_MASK BIT(2)
> > +#define PSU2_POWERGOOD_MASK BIT(3)
> > +#define PSU1_ALERT_MASK BIT(4)
> > +#define PSU2_ALERT_MASK BIT(5)
> > +
> > +static int board_id_get(struct tn48m_data *data)
> > +{
> > + unsigned int regval;
> > +
> > + regmap_read(data->regmap, BOARD_ID, ®val);
> > +
> > + switch (regval) {
> > + case BOARD_ID_TN48M:
> > + return BOARD_ID_TN48M;
> > + case BOARD_ID_TN48M_P:
> > + return BOARD_ID_TN48M_P;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static ssize_t psu_present_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
> > + struct tn48m_data *data = dev_get_drvdata(dev);
> > + unsigned int regval, status;
> > +
> > + if (board_id_get(data) == BOARD_ID_TN48M_P) {
> > + regmap_read(data->regmap, attr2->nr, ®val);
> > +
> > + if (attr2->index == 1)
> > + status = !FIELD_GET(PSU1_PRESENT_MASK, regval);
> > + else
> > + status = !FIELD_GET(PSU2_PRESENT_MASK, regval);
> > + } else
> > + status = 0;
> > +
> > + return sprintf(buf, "%d\n", status);
> > +}
> > +
> > +static ssize_t psu_pg_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
> > + struct tn48m_data *data = dev_get_drvdata(dev);
> > + unsigned int regval, status;
> > +
> > + regmap_read(data->regmap, attr2->nr, ®val);
> > +
> > + if (attr2->index == 1)
> > + status = FIELD_GET(PSU1_POWERGOOD_MASK, regval);
> > + else
> > + status = FIELD_GET(PSU2_POWERGOOD_MASK, regval);
> > +
> > + return sprintf(buf, "%d\n", status);
> > +}
> > +
> > +static ssize_t psu_alert_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
> > + struct tn48m_data *data = dev_get_drvdata(dev);
> > + unsigned int regval, status;
> > +
> > + if (board_id_get(data) == BOARD_ID_TN48M_P) {
> > + regmap_read(data->regmap, attr2->nr, ®val);
> > +
> > + if (attr2->index == 1)
> > + status = !FIELD_GET(PSU1_ALERT_MASK, regval);
> > + else
> > + status = !FIELD_GET(PSU2_ALERT_MASK, regval);
> > + } else
> > + status = 0;
> > +
> > + return sprintf(buf, "%d\n", status);
> > +}
> > +
> > +static SENSOR_DEVICE_ATTR_2_RO(psu1_present, psu_present, PSU_STATUS, 1);
> > +static SENSOR_DEVICE_ATTR_2_RO(psu2_present, psu_present, PSU_STATUS, 2);
> > +static SENSOR_DEVICE_ATTR_2_RO(psu1_pg, psu_pg, PSU_STATUS, 1);
> > +static SENSOR_DEVICE_ATTR_2_RO(psu2_pg, psu_pg, PSU_STATUS, 2);
> > +static SENSOR_DEVICE_ATTR_2_RO(psu1_alert, psu_alert, PSU_STATUS, 1);
> > +static SENSOR_DEVICE_ATTR_2_RO(psu2_alert, psu_alert, PSU_STATUS, 2);
> > +
> > +static struct attribute *tn48m_hwmon_attrs[] = {
> > + &sensor_dev_attr_psu1_present.dev_attr.attr,
> > + &sensor_dev_attr_psu2_present.dev_attr.attr,
> > + &sensor_dev_attr_psu1_pg.dev_attr.attr,
> > + &sensor_dev_attr_psu2_pg.dev_attr.attr,
> > + &sensor_dev_attr_psu1_alert.dev_attr.attr,
> > + &sensor_dev_attr_psu2_alert.dev_attr.attr,
>
> Literally none of those attributes are standard hwmon attributes.
> I don't know what this is, but it is not a hardware monitoring driver.
Yes, I agree that it does not expose any of the standard attributes, but these
are the only ones the CPLD exposes.
I don't know where else to put them, MFD driver did not seem logical to me.
>
> > + NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(tn48m_hwmon);
> > +
> > +static int tn48m_hwmon_probe(struct platform_device *pdev)
> > +{
> > + struct tn48m_data *data = dev_get_drvdata(pdev->dev.parent);
> > + struct device *hwmon_dev;
> > +
> > + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
> > + "tn48m_hwmon",
> > + data,
> > + tn48m_hwmon_groups);
>
> Please use devm_hwmon_device_register_with_info() to register hwmon devices.
> Of course, that only makes sense for actual hardware monitoring drivers
> which do support standard attributes.
Yes, devm_hwmon_device_register_with_info() made no sense without any of the
standard attributes.
Robert
>
> > + return PTR_ERR_OR_ZERO(hwmon_dev);
> > +}
> > +
> > +static const struct platform_device_id tn48m_hwmon_id_table[] = {
> > + { "delta,tn48m-hwmon", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(platform, tn48m_hwmon_id_table);
> > +
> > +static struct platform_driver tn48m_hwmon_driver = {
> > + .driver = {
> > + .name = "tn48m-hwmon",
> > + },
> > + .probe = tn48m_hwmon_probe,
> > + .id_table = tn48m_hwmon_id_table,
> > +};
> > +module_platform_driver(tn48m_hwmon_driver);
> > +
> > +MODULE_AUTHOR("Robert Marko <robert.marko@...tura.hr>");
> > +MODULE_DESCRIPTION("Delta TN48M CPLD HWMON driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/mfd/tn48m-cpld.c b/drivers/mfd/tn48m-cpld.c
> > index f22a15ddd22d..4d837aca01e7 100644
> > --- a/drivers/mfd/tn48m-cpld.c
> > +++ b/drivers/mfd/tn48m-cpld.c
> > @@ -20,6 +20,9 @@
> > static const struct mfd_cell tn48m_cell[] = {
> > {
> > .name = "delta,tn48m-gpio",
> > + },
> > + {
> > + .name = "delta,tn48m-hwmon",
> > }
> > };
> >
> > diff --git a/include/linux/mfd/tn48m.h b/include/linux/mfd/tn48m.h
> > index 9cc2b04c8d69..eb2cfc3a5db7 100644
> > --- a/include/linux/mfd/tn48m.h
> > +++ b/include/linux/mfd/tn48m.h
> > @@ -22,6 +22,7 @@
> > #define SFP_TX_DISABLE 0x31
> > #define SFP_PRESENT 0x3a
> > #define SFP_LOS 0x40
> > +#define PSU_STATUS 0xa
> >
> > struct tn48m_data {
> > struct device *dev;
> >
>
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@...tura.hr
Web: www.sartura.hr
Powered by blists - more mailing lists