[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210520171310.772-1-mark.kettenis@xs4all.nl>
Date: Thu, 20 May 2021 19:13:05 +0200
From: Mark Kettenis <mark.kettenis@...all.nl>
To: devicetree@...r.kernel.org
Cc: Mark Kettenis <kettenis@...nbsd.org>,
Hector Martin <marcan@...can.st>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 0/2] Apple M1 pinctrl DT bindings
From: Mark Kettenis <kettenis@...nbsd.org>
This small series adds bindings for the pin and GPIO controller found
on the Apple M1 SoC.
At this point, the primary consumer for these bindings is U-Boot.
With the help of these bindings U-Boot can bring up the PCIe root
complex into a state where the OS use it without having to deal with
the GPIO pins. A Linux driver may be implemented later to support
power management and/or other devices that need GPIO control. Since
the binding is based on standard pinmux node bindings this should be
relatively easy.
Changelog:
v2: - Fix typo in DT schema
v3: - Add description for interrupts property
Mark Kettenis (2):
dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
arm64: apple: Add pinctrl nodes
.../bindings/pinctrl/apple,pinctrl.yaml | 106 ++++++++++++++++++
MAINTAINERS | 2 +
arch/arm64/boot/dts/apple/t8103.dtsi | 83 ++++++++++++++
include/dt-bindings/pinctrl/apple.h | 13 +++
4 files changed, 204 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
create mode 100644 include/dt-bindings/pinctrl/apple.h
--
2.31.1
Powered by blists - more mailing lists