[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210520202730.4444-1-dariobin@libero.it>
Date: Thu, 20 May 2021 22:27:27 +0200
From: Dario Binacchi <dariobin@...ero.it>
To: linux-kernel@...r.kernel.org
Cc: Dario Binacchi <dariobin@...ero.it>,
Tony Lindgren <tony@...mide.com>,
Drew Fustini <drew@...gleboard.org>,
Linus Walleij <linus.walleij@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Jonathan Corbet <corbet@....net>,
linux-arm-kernel@...ts.infradead.org, linux-doc@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-omap@...r.kernel.org
Subject: [PATCH v3 0/3] am335x: set pinmux registers from pins debug file
The patch was born from the need to change the slew rate of the LCD pins
of a custom AM335x board during EMC tests. The AM335x, as described in a
note in section 9.1 of its reference manual [1], is unable to write
pinmux registers from user space. The series now makes it possible to
write these registers from the pins debug file.
[1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
Changes in v3:
- Use strncpy_from_user() instead of copy_from_user().
- Do not shadow the error code returned by kstrtouint().
- Change pin_dbg_set() interface (char *buf --> unsigned int val).
- Describe pin_dbg_set().
- Remove CONFIG_DEV_MEM dependency.
- Change pcs_pin_dbg_set() interface (char *buf -> unsigned int val).
Changes in v2:
- Remove CONFIG_SOC_AM33XX dependency.
Dario Binacchi (3):
docs/pinctrl: update `pins' description under debugfs
pinctrl: core: configure pinmux from pins debug file
pinctrl: single: set pinmux from pins debug file
Documentation/driver-api/pin-control.rst | 3 ++
drivers/pinctrl/core.c | 63 +++++++++++++++++++++++-
drivers/pinctrl/pinctrl-single.c | 13 +++++
include/linux/pinctrl/pinctrl.h | 4 ++
4 files changed, 81 insertions(+), 2 deletions(-)
--
2.17.1
Powered by blists - more mailing lists