| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210521174041.000040da@Huawei.com>
Date: Fri, 21 May 2021 17:40:41 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
CC: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>, <kernel@...gutronix.de>,
<linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>,
David Jander <david@...tonic.nl>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v5 8/8] Input: resistive-adc-touch: add support for z1
and z2 channels
On Fri, 21 May 2021 06:45:25 +0200
Oleksij Rempel <o.rempel@...gutronix.de> wrote:
> This patch adds support for the z1 and z2 channels. These are used to
> calculate the applied pressure. As there is no common order of the
> individual channels of a resistive touch ADC, support for
> io-channel-names is added (although the DT bindings stated the
> driver already supports these).
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
One minor comment inline, but otherwise looks good to me.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Would be nice at some point to make this handle channels that
aren't 16 bits, but that can be a job for another day.
Jonathan
> ---
> .../input/touchscreen/resistive-adc-touch.c | 142 ++++++++++++++++--
> 1 file changed, 128 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c
> index e50af30183f4..fa90005b7bc9 100644
> --- a/drivers/input/touchscreen/resistive-adc-touch.c
> +++ b/drivers/input/touchscreen/resistive-adc-touch.c
> @@ -20,7 +20,18 @@
>
> #define DRIVER_NAME "resistive-adc-touch"
> #define GRTS_DEFAULT_PRESSURE_MIN 50000
> +#define GRTS_DEFAULT_PRESSURE_MAX 65535
> #define GRTS_MAX_POS_MASK GENMASK(11, 0)
> +#define GRTS_MAX_CHANNELS 4
> +
> +enum grts_ch_type {
> + GRTS_CH_NONE = 0,
> + GRTS_CH_X,
> + GRTS_CH_Y,
> + GRTS_CH_PRESSURE,
> + GRTS_CH_Z1,
> + GRTS_CH_Z2,
> +};
>
> /**
> * struct grts_state - generic resistive touch screen information struct
> @@ -33,24 +44,61 @@
> */
> struct grts_state {
> u32 pressure_min;
> + u32 x_plate_ohms;
> bool pressure;
> struct iio_channel *iio_chans;
> struct iio_cb_buffer *iio_cb;
> struct input_dev *input;
> struct touchscreen_properties prop;
> + u8 ch[GRTS_MAX_CHANNELS];
> };
>
> static int grts_cb(const void *data, void *private)
> {
> const u16 *touch_info = data;
> struct grts_state *st = private;
> - unsigned int x, y, press = 0x0;
> + unsigned int x, y, press = 0, z1 = 0, z2;
> + unsigned int Rt, i;
> +
> + for (i = 0; i < ARRAY_SIZE(st->ch) && st->ch[i] != GRTS_CH_NONE; i++) {
> + switch (st->ch[i]) {
> + case GRTS_CH_X:
> + x = touch_info[i];
> + break;
> + case GRTS_CH_Y:
> + y = touch_info[i];
> + break;
> + case GRTS_CH_PRESSURE:
> + press = touch_info[i];
> + break;
> + case GRTS_CH_Z1:
> + z1 = touch_info[i];
> + break;
> + case GRTS_CH_Z2:
> + z2 = touch_info[i];
> + break;
> + case GRTS_CH_NONE:
Loop condition above prevents this. I guess you might get a warning though
so if this is just warning suppression then add a comment to say so to
make sure it isn't removed.
> + break;
> + }
> + }
>
> - /* channel data coming in buffer in the order below */
> - x = touch_info[0];
> - y = touch_info[1];
> - if (st->pressure)
> - press = touch_info[2];
> + if (z1) {
> + Rt = z2;
> + Rt -= z1;
> + Rt *= st->x_plate_ohms;
> + Rt = DIV_ROUND_CLOSEST(Rt, 16);
> + Rt *= x;
> + Rt /= z1;
> + Rt = DIV_ROUND_CLOSEST(Rt, 256);
> + /*
> + * On increased pressure the resistance (Rt) is decreasing
> + * so, convert values to make it looks as real pressure.
> + */
> + if (Rt < GRTS_DEFAULT_PRESSURE_MAX)
> + press = GRTS_DEFAULT_PRESSURE_MAX - Rt;
> + else
> + press = 0;
> + }
>
> if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {
> /* report end of touch */
> @@ -94,12 +142,77 @@ static void grts_disable(void *data)
> iio_channel_release_all_cb(data);
> }
>
> +static int grts_get_properties(struct grts_state *st, struct device *dev)
> +{
> + int idx, error;
> +
> + idx = device_property_match_string(dev, "io-channel-names", "x");
> + if (idx < 0)
> + return idx;
> +
> + if (idx >= ARRAY_SIZE(st->ch))
> + return -EOVERFLOW;
> +
> + st->ch[idx] = GRTS_CH_X;
> +
> + idx = device_property_match_string(dev, "io-channel-names", "y");
> + if (idx < 0)
> + return idx;
> +
> + if (idx >= ARRAY_SIZE(st->ch))
> + return -EOVERFLOW;
> +
> + st->ch[idx] = GRTS_CH_Y;
> +
> + /* pressure is optional */
> + idx = device_property_match_string(dev, "io-channel-names", "pressure");
> + if (idx >= 0) {
> + if (idx >= ARRAY_SIZE(st->ch))
> + return -EOVERFLOW;
> +
> + st->ch[idx] = GRTS_CH_PRESSURE;
> + st->pressure = true;
> +
> + return 0;
> + }
> +
> + /* if no pressure is defined, try optional z1 + z2 */
> + idx = device_property_match_string(dev, "io-channel-names", "z1");
> + if (idx < 0)
> + return 0;
> +
> + if (idx >= ARRAY_SIZE(st->ch))
> + return -EOVERFLOW;
> +
> + st->ch[idx] = GRTS_CH_Z1;
> +
> + /* if z1 is provided z2 is not optional */
> + idx = device_property_match_string(dev, "io-channel-names", "z2");
> + if (idx < 0)
> + return idx;
> +
> + if (idx >= ARRAY_SIZE(st->ch))
> + return -EOVERFLOW;
> +
> + st->ch[idx] = GRTS_CH_Z2;
> + st->pressure = true;
> +
> + error = device_property_read_u32(dev,
> + "touchscreen-x-plate-ohms",
> + &st->x_plate_ohms);
> + if (error) {
> + dev_err(dev, "can't get touchscreen-x-plate-ohms property\n");
> + return error;
> + }
> +
> + return 0;
> +}
> +
> static int grts_probe(struct platform_device *pdev)
> {
> struct grts_state *st;
> struct input_dev *input;
> struct device *dev = &pdev->dev;
> - struct iio_channel *chan;
> int error;
>
> st = devm_kzalloc(dev, sizeof(struct grts_state), GFP_KERNEL);
> @@ -115,12 +228,13 @@ static int grts_probe(struct platform_device *pdev)
> return error;
> }
>
> - chan = &st->iio_chans[0];
> - st->pressure = false;
> - while (chan && chan->indio_dev) {
> - if (!strcmp(chan->channel->datasheet_name, "pressure"))
> - st->pressure = true;
> - chan++;
> + if (!device_property_present(dev, "io-channel-names"))
> + return -ENODEV;
> +
> + error = grts_get_properties(st, dev);
> + if (error) {
> + dev_err(dev, "Failed to parse properties\n");
> + return error;
> }
>
> if (st->pressure) {
> @@ -148,7 +262,7 @@ static int grts_probe(struct platform_device *pdev)
> input_set_abs_params(input, ABS_Y, 0, GRTS_MAX_POS_MASK - 1, 0, 0);
> if (st->pressure)
> input_set_abs_params(input, ABS_PRESSURE, st->pressure_min,
> - 0xffff, 0, 0);
> + GRTS_DEFAULT_PRESSURE_MAX, 0, 0);
>
> input_set_capability(input, EV_KEY, BTN_TOUCH);
>
Powered by blists - more mailing lists