[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210521174614.2535824-1-f.fainelli@gmail.com>
Date: Fri, 21 May 2021 10:46:14 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: zajec5@...il.com, Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rafał Miłecki <rafal@...ecki.pl>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net] net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for non-RGMII port
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
interface. Move that read until we have properly qualified the PHY
interface mode. This avoids triggering a warning on 7278 platforms that
have GMII ports.
Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
David, Jakub, please queue this up for stable because the offnending
commit is already in 5.12, thanks!
drivers/net/dsa/bcm_sf2.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 9150038b60cb..3b018fcf4412 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -821,11 +821,9 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
bcm_sf2_sw_mac_link_set(ds, port, interface, true);
if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
- u32 reg_rgmii_ctrl;
+ u32 reg_rgmii_ctrl = 0;
u32 reg, offset;
- reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-
if (priv->type == BCM4908_DEVICE_ID ||
priv->type == BCM7445_DEVICE_ID)
offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
@@ -836,6 +834,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
interface == PHY_INTERFACE_MODE_RGMII_TXID ||
interface == PHY_INTERFACE_MODE_MII ||
interface == PHY_INTERFACE_MODE_REVMII) {
+ reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
reg = reg_readl(priv, reg_rgmii_ctrl);
reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
--
2.25.1
Powered by blists - more mailing lists