| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+V-a8vWBzEkgt8KOOY-m3xpht5HO6rjkc_rGyY-UmoaeZBsNQ@mail.gmail.com>
Date: Fri, 21 May 2021 19:36:41 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Rob Herring <robh+dt@...nel.org>,
Magnus Damm <magnus.damm@...il.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Jiri Slaby <jirislaby@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
"open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for
RZ/G2{L,LC} SoC's
Hi Geert,
Thank you for the review.
On Fri, May 21, 2021 at 4:35 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> > Add initial DTSI for RZ/G2{L,LC} SoC's.
> >
> > File structure:
> > r9a07g044.dtsi => RZ/G2L family SoC common parts
> > r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC
> > r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC
> > r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
>
> Thanks for your patch!
>
> > index 000000000000..c625d302f889
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> > @@ -0,0 +1,70 @@
> > +// SPDX-License-Identifier: GPL-2.0
>
> Do we want to use
>
> SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>
> for new DTS files?
> This actually also applies to <dt-bindings/...> files.
>
> > +/*
> > + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/r9a07g044l-cpg.h>
> > +
> > +/ {
> > + compatible = "renesas,r9a07g044";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + extal_clk: extal {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + /* This value must be overridden by the board */
> > + clock-frequency = <0>;
> > + };
> > +
> > + psci {
> > + compatible = "arm,psci-1.0", "arm,psci-0.2";
> > + method = "smc";
> > + };
> > +
> > + soc: soc {
> > + compatible = "simple-bus";
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + scif0: serial@...4b800 {
> > + compatible = "renesas,scif-r9a07g044";
> > + reg = <0 0x1004b800 0 0x400>;
> > + interrupts =
> > + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
>
> "make dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/renesas,scif.yaml":
>
> arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml:
> serial@...4b800: interrupts: 'oneOf' conditional failed, one must be
> fixed:
> [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]]
> is too long
> Additional items are not allowed ([0, 382, 4], [0, 383, 4], [0,
> 381, 4], [0, 384, 4] were unexpected)
> Additional items are not allowed ([0, 384, 4] was unexpected)
> [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]]
> is too short
>
> One interrupt is missing. According to the documentation, "tei" and
> "dri" share an interrupt, so they should map to the same interrupt number.
> Please add interrupt-names.
>
Agreed will do.
> > + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
> > + clock-names = "fck";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CLK_SCIF0>;
> > + status = "disabled";
> > + };
> > +
> > + devid: chipid@...20a04 {
> > + compatible = "renesas,devid";
> > + reg = <0 0x11020a04 0 4>;
> > + };
> > +
> > + gic: interrupt-controller@...00000 {
> > + compatible = "arm,gic-v3";
> > + #interrupt-cells = <3>;
> > + #address-cells = <0>;
> > + interrupt-controller;
> > + reg = <0x0 0x11900000 0 0x40000>,
> > + <0x0 0x11940000 0 0x60000>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&cpg CPG_MOD R9A07G044_CLK_GIC600>;
> > + clock-names = "gic6000";
>
> This looks like a weird name ;-)
> In addition, it should be the consumer clock name, not the provider
> clock name.
>
Agreed will rename that.
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CLK_GIC600>;
>
> "make dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml":
>
> arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml:
> interrupt-controller@...00000: 'clock-names', 'clocks',
> 'power-domains', 'resets' do not match any of the regexes:
> '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$',
> '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> These properties should be added to the GIC-v3 bindings, cfr. the normal
> GIC bindings.
>
Agreed will do that.
>
> > + };
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi
> > new file mode 100644
> > index 000000000000..8d396b9100c1
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi
> > @@ -0,0 +1,21 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the RZ/G2L common SoC parts
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +/dts-v1/;
> > +#include "r9a07g044.dtsi"
> > +
> > +&soc {
> > + cpg: clock-controller@...10000 {
> > + compatible = "renesas,r9a07g044l-cpg";
> > + reg = <0 0x11010000 0 0x10000>;
> > + clocks = <&extal_clk>;
> > + clock-names = "extal";
> > + #clock-cells = <2>;
> > + #reset-cells = <1>;
> > + #power-domain-cells = <0>;
> > + };
>
> As I think this is shared by RZ/G2L and RZ/G2LC, it belongs to
> r9a07g044.dtsi.
>
As some of the IP blocks present on RZ/G2L aren't present in RZ/G2LC
the clocks for the IP will be missing hence this is added to SoC
specific dtsi.
> > +};
> > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
> > new file mode 100644
> > index 000000000000..44d4504e44c3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
> > @@ -0,0 +1,43 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +/dts-v1/;
> > +#include "r9a07g044l.dtsi"
> > +
> > +/ {
> > + compatible = "renesas,r9a07g044l1";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
>
> #{address,size}-cells already defined in r9a07g044.dtsi.
>
Will drop that.
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + a55_0: cpu@0 {
> > + compatible = "arm,cortex-a55";
> > + reg = <0>;
> > + device_type = "cpu";
> > + next-level-cache = <&L3_CA55>;
> > + enable-method = "psci";
> > + };
> > +
> > + L3_CA55: cache-controller-0 {
> > + compatible = "cache";
> > + cache-unified;
> > + cache-size = <0x40000>;
> > + };
>
> I think the first CPU core should be in the base r9a07g044.dtsi file.
>
OK will move that.
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts-extended =
> > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
>
> Also in the base file, with interrupts-extended overridden where
> needed?
>
OK will override here with the timer node moved from r9a07g044l2.dtsi
to common SoC file.
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
> > new file mode 100644
> > index 000000000000..33bb35e1c369
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
> > @@ -0,0 +1,62 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the RZ/G2L R9A07G044L2 common parts
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +/dts-v1/;
> > +#include "r9a07g044l.dtsi"
> > +
> > +/ {
> > + compatible = "renesas,r9a07g044l2";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu-map {
> > + cluster0 {
> > + core0 {
> > + cpu = <&a55_0>;
> > + };
> > + core1 {
> > + cpu = <&a55_1>;
> > + };
> > + };
> > + };
> > +
> > + a55_0: cpu@0 {
> > + compatible = "arm,cortex-a55";
> > + reg = <0>;
> > + device_type = "cpu";
> > + next-level-cache = <&L3_CA55>;
> > + enable-method = "psci";
> > + };
> > +
> > + a55_1: cpu@1 {
> > + compatible = "arm,cortex-a55";
> > + reg = <0x100>;
> > + device_type = "cpu";
> > + next-level-cache = <&L3_CA55>;
> > + enable-method = "psci";
> > + };
> > +
> > + L3_CA55: cache-controller-0 {
> > + compatible = "cache";
> > + cache-unified;
> > + cache-size = <0x40000>;
> > + };
>
> I think (at least) the first CPU core should be in the base
> r9a07g044.dtsi file.
> Probably the second CPU core should be in the base file, too, and
> removed by /delete-node/ in r9a07g044l1.dtsi?
>
Agreed will do that.
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts-extended =
> > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
>
> Also in the base file, with interrupts-extended overridden where
> needed?
>
Will move this node to common SoC r9a07g044.dtsi file and override in
r9a07g044l1.dtsi with CPU maks to 1.
Cheers,
Prabhakar
> > +};
> > --
> > 2.17.1
> >
>
>
> --
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Powered by blists - more mailing lists