linux-kernel - Re: [PATCH v4 1/2] drm/msm/dp: handle irq_hpd with sink

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <fc6542f2e760fa92aef73fdb9a789b2d@codeaurora.org>
Date:   Fri, 21 May 2021 12:45:35 -0700
From:   khsieh@...eaurora.org
To:     Stephen Boyd <swboyd@...omium.org>
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robdclark@...il.com,
        sean@...rly.run, vkoul@...nel.org, abhinavk@...eaurora.org,
        aravindh@...eaurora.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 1/2] drm/msm/dp: handle irq_hpd with sink_count = 0
 correctly

On 2021-05-21 12:18, Stephen Boyd wrote:
> Quoting khsieh@...eaurora.org (2021-05-21 08:21:58)
>> >
>> > Ok. So you're saying that we want to put both events on the queue
>> > regardless, and put IRQ_HPD there first because we want to check the
>> > status bit? Doesn't reading the status bit require the dongle to be
>> > connected though? So if an unplug came in along with an irq_hpd we may
>> > queue both the irq_hpd and the unplug, but when it comes time to
>> > process
>> > the irq_hpd in the kthread the link will be gone and so trying the dpcd
>> > read for the link status will fail?
>> >
>> yes,
>> we had a previous bug with this scenarios already.
>> https://partnerissuetracker.corp.google.com/issues/170598152
>> At this case, dongle produce two interrupts, irq_hpd followed by 
>> unplug
>> immediately (not presented at isr status register at same time), at 
>> the
>> time dongle unplugged form DTU.
>> But due to dp ctrl reset at handling irq_hpd which cause unplug mask 
>> bit
>> be cleared so that unplug interrupt got lost.
>> 
> 
> Again, wouldn't that be too late if the hardirq handler is delayed to
> the point that the two irqs are pending in the isr status register?

yes,
but that not much dp driver can do.
As long as DP driver can recovery (shut down gracefully) and ready for 
next plugin, then i think it should be fine.