linux-kernel - [PATCH 2/2] nvmem: qfprom: Improve the comment about regulator setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210521140031.2.Iaa641db08ce7c571860dcce13e4ce056008b711e@changeid>
Date:   Fri, 21 May 2021 14:00:58 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc:     Rajendra Nayak <rnayak@...eaurora.org>,
        linux-arm-msm@...r.kernel.org, Stephen Boyd <swboyd@...omium.org>,
        Joe Perches <joe@...ches.com>,
        Douglas Anderson <dianders@...omium.org>,
        linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] nvmem: qfprom: Improve the comment about regulator setting

In review feedback Joe Perches found the existing comment
confusing. Let's use something based on the wording proposed by Joe.

Suggested-by: Joe Perches <joe@...ches.com>
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---

 drivers/nvmem/qfprom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 1ba666bcb900..81fbad5e939d 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -196,9 +196,9 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
 	}
 
 	/*
-	 * Hardware requires a min voltage for fuse blowing; this may be
-	 * a rail shared do don't specify a max--regulator constraints
-	 * will handle.
+	 * Hardware requires a minimum voltage for fuse blowing.
+	 * This may be a shared rail so don't specify a maximum.
+	 * Regulator constraints will cap to the actual maximum.
 	 */
 	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
 	if (ret) {
-- 
2.31.1.818.g46aad6cb9e-goog