| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210522140412.GC8194@dragon>
Date: Sat, 22 May 2021 22:04:14 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Sebastian Reichel <sebastian.reichel@...labora.com>
Cc: Philipp Zabel <p.zabel@...gutronix.de>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Rob Herring <robh+dt@...nel.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Saravana Kannan <saravanak@...gle.com>,
devicetree@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-rtc@...r.kernel.org, linux-mtd@...ts.infradead.org,
kernel@...labora.com
Subject: Re: [PATCHv2 5/5] ARM: dts: imx6: Add GE B1x5v2
On Thu, Apr 29, 2021 at 12:29:53AM +0200, Sebastian Reichel wrote:
> This adds device tree files for the General Electric Healthcare
> (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 module,
> which is described in its own device tree include, so that it can
> also be used by other boards.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> ---
> arch/arm/boot/dts/Makefile | 5 +
> arch/arm/boot/dts/imx6dl-b105pv2.dts | 35 ++
> arch/arm/boot/dts/imx6dl-b105v2.dts | 35 ++
> arch/arm/boot/dts/imx6dl-b125pv2.dts | 33 ++
> arch/arm/boot/dts/imx6dl-b125v2.dts | 33 ++
> arch/arm/boot/dts/imx6dl-b155v2.dts | 36 ++
> arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 434 ++++++++++++++++++
> arch/arm/boot/dts/imx6dl-b1x5v2.dtsi | 61 +++
> arch/arm/boot/dts/imx6dl-qmx6.dtsi | 624 ++++++++++++++++++++++++++
> 9 files changed, 1296 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
> create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
> create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f8f09c5066e7..811f22ed1e37 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -515,6 +515,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-dms-ba16.dtb \
> imx6q-emcon-avari.dtb \
> imx6q-evi.dtb \
> + imx6dl-b105v2.dtb \
> + imx6dl-b105pv2.dtb \
'p' goes before 'v'.
> + imx6dl-b125v2.dtb \
> + imx6dl-b125pv2.dtb \
> + imx6dl-b155v2.dtb \
> imx6q-gk802.dtb \
> imx6q-gw51xx.dtb \
> imx6q-gw52xx.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts
> new file mode 100644
> index 000000000000..0d5be2f9471f
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B105Pv2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +/dts-v1/;
> +#include "imx6dl-b1x5pv2.dtsi"
> +
> +/ {
> + model = "General Electric B105Pv2";
> + compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
> +
> + panel {
> + compatible = "auo,g101evn010";
> + status = "okay";
Unneeded okay status.
> + };
> +};
> +
> +&i2c3 {
> + touchscreen@41 {
> + reg = <0x41>;
We generally start property list with 'compatible'.
> + compatible = "ilitek,ili251x";
> +
In general, we do not use newline in middle of property list.
> + pinctrl-names = "default";
> + pinctrl-0 =<&pinctrl_q7_gpio0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
> +
> + touchscreen-size-x = <1280>;
> + touchscreen-size-y = <800>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts
> new file mode 100644
> index 000000000000..72a085348304
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b105v2.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B105v2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +/dts-v1/;
> +#include "imx6dl-b1x5v2.dtsi"
> +
> +/ {
> + model = "General Electric B105v2";
> + compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
> +
> + panel {
> + compatible = "auo,g101evn010";
> + status = "okay";
> + };
> +};
> +
> +&i2c3 {
> + touchscreen@41 {
> + reg = <0x41>;
> + compatible = "ilitek,ili251x";
> +
> + pinctrl-names = "default";
> + pinctrl-0 =<&pinctrl_q7_gpio0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
> +
> + touchscreen-size-x = <1280>;
> + touchscreen-size-y = <800>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts
> new file mode 100644
> index 000000000000..8fd6c8ed6750
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B125Pv2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +/dts-v1/;
> +#include "imx6dl-b1x5pv2.dtsi"
> +
> +/ {
> + model = "General Electric B125Pv2";
> + compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
> +
> + panel {
> + compatible = "auo,g121ean01";
> + status = "okay";
> + };
> +};
> +
> +&i2c3 {
> + touchscreen@2a {
> + reg = <0x2a>;
> + compatible = "eeti,exc80h60";
> +
> + pinctrl-names = "default";
> + pinctrl-0 =<&pinctrl_q7_gpio0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +
> + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts
> new file mode 100644
> index 000000000000..eb26ffde9f72
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b125v2.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B125v2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +/dts-v1/;
> +#include "imx6dl-b1x5v2.dtsi"
> +
> +/ {
> + model = "General Electric B125v2";
> + compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
> +
> + panel {
> + compatible = "auo,g121ean01";
> + status = "okay";
> + };
> +};
> +
> +&i2c3 {
> + touchscreen@2a {
> + reg = <0x2a>;
> + compatible = "eeti,exc80h60";
> +
> + pinctrl-names = "default";
> + pinctrl-0 =<&pinctrl_q7_gpio0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +
> + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts
> new file mode 100644
> index 000000000000..620cd6f9da82
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b155v2.dts
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B155v2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +/dts-v1/;
> +#include "imx6dl-b1x5v2.dtsi"
> +
> +/ {
> + model = "General Electric B155v2";
> + compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
> +
> + panel {
> + compatible = "auo,g156xtn01";
> + status = "okay";
> + };
> +};
> +
> +&i2c3 {
> + touchscreen@2a {
> + reg = <0x2a>;
> + compatible = "eeti,exc80h84";
> +
> + pinctrl-names = "default";
> + pinctrl-0 =<&pinctrl_q7_gpio0>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +
> + touchscreen-inverted-x;
> + touchscreen-inverted-y;
> +
> + reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
> new file mode 100644
> index 000000000000..1f9e66e1afc0
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
> @@ -0,0 +1,434 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B1x5v2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6dl-qmx6.dtsi"
> +
> +/ {
> + chosen {
> + stdout-path = &uart3;
> + };
> +
> + /* Do not allow frequencies above 800MHz */
> + cpus {
> + cpu@0 {
> + operating-points = <
> + /* kHz uV */
> + 792000 1175000
> + 396000 1150000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 792000 1175000
> + 396000 1175000
> + >;
> + };
> +
> + cpu@1 {
> + operating-points = <
> + /* kHz uV */
> + 792000 1175000
> + 396000 1150000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 792000 1175000
> + 396000 1175000
> + >;
> + };
> + };
> +
> + reg_syspwr: regulator-12v {
> + compatible = "regulator-fixed";
> + regulator-name = "SYS_PWR";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + regulator-always-on;
always-on is meaningless for a regulator that doesn't have on/off
control.
> + };
> +
> + reg_5v_pmc: regulator-5v-pmc {
> + compatible = "regulator-fixed";
> + regulator-name = "5V PMC";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + vin-supply = <®_syspwr>;
> + };
> +
> + reg_5v: regulator-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + vin-supply = <®_syspwr>;
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + vin-supply = <®_syspwr>;
> + };
> +
> + reg_5v0_audio: regulator-5v0-audio {
> + compatible = "regulator-fixed";
> + regulator-name = "5V0_AUDIO";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <®_5v>;
> +
Unneeded newline.
> + gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
Ditto
> + /*
> + * This must be always-on for da7212, which has some not
> + * properly documented dependencies for it's speaker supply
> + * pin. The issue manifests as speaker volume being very low.
> + */
> + regulator-always-on;
> + };
> +
> +
> + reg_3v3_audio: regulator-3v3-audio {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3_AUDIO";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <®_3v3>;
> +
> + pinctrl-0 = <&pinctrl_q7_hda_rst>;
> + pinctrl-names = "default";
> + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_2v5_audio: regulator-2v5-audio {
> + compatible = "regulator-fixed";
> + regulator-name = "2V5_AUDIO";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-always-on;
> + vin-supply = <®_3v3_audio>;
> +
> + };
> +
> + reg_wlan: regulator-wlan {
> + compatible = "regulator-fixed";
> + regulator-name = "WLAN";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <®_3v3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_sdio_pwr>;
> + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
> +
> + startup-delay-us = <70000>;
> + enable-active-high;
Put it right after GPIO_ACTIVE_HIGH line.
> + };
> +
> + reg_bl: regulator-backlight {
> + compatible = "regulator-fixed";
> + regulator-name = "LED_VCC";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + vin-supply = <®_syspwr>;
> +
> + pinctrl-0 = <&pinctrl_q7_lcd_power>;
> + pinctrl-names = "default";
> + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_lcd: regulator-lcd {
> + compatible = "regulator-fixed";
> + regulator-name = "LCD_5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <®_5v>;
> + };
> +
> + usb_power: regulator-usb-power {
> + compatible = "regulator-fixed";
> + regulator-name = "USB POWER";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <®_5v>;
> + };
> +
> + charger: battery-charger {
> + compatible = "gpio-charger"; /* ti,bq24172 */
> +
> + charger-type = "mains";
> + gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
> + charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
> + <&tca6424a 12 GPIO_ACTIVE_HIGH>;
> + charge-current-limit-mapping = <1300000 0x0>,
> + <700000 0x1>,
> + <0 0x2>;
> +
> + charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
> + };
> +
> + poweroff {
> + compatible = "gpio-poweroff";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_spi_cs1>;
> + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
> + };
> +
> + power-button-key {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_slp_btn>;
> +
> + power-button {
> + label = "power button";
> + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + };
> + };
> +
> + rotary-encoder-key {
> + compatible = "gpio-keys";
> +
> + rotary-encoder-press {
> + label = "rotary-encoder press";
> + gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
> + linux,code = <KEY_ENTER>;
> + linux,can-disable;
> + };
> + };
> +
> + rotary-encoder {
> + compatible = "rotary-encoder";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
> + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
> + rotary-encoder,relative-axis;
> + rotary-encoder,steps-per-period = <2>;
> + wakeup-source;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
> +
> + alarm1 {
> + label = "alarm:red";
> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + };
> +
> + alarm2 {
> + label = "alarm:yellow";
> + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> + };
> +
> + alarm3 {
> + label = "alarm:blue";
> + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_backlight_enable>;
> + power-supply = <®_bl>;
> + pwms = <&pwm4 0 5000000 0>;
> + brightness-levels = <0 255>;
> + num-interpolated-steps = <255>;
> + default-brightness-level = <179>;
> + enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + status = "okay";
Unneeded okay status.
> + };
> +
> + panel {
> + backlight = <&backlight>;
> + power-supply = <®_lcd>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&dailink_master>;
> + simple-audio-card,frame-master = <&dailink_master>;
> +
> + simple-audio-card,widgets = "Speaker", "Ext Spk";
> + simple-audio-card,audio-routing = "Ext Spk", "LINE";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&ssi1>;
> + };
> +
> + dailink_master: simple-audio-card,codec {
> + sound-dai = <&codec>;
> + };
> + };
> +
> + clk_ext_audio_codec: clock-codec {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <12288000>;
> + };
> +};
> +
> +&i2c1 {
> + battery: battery@b {
> + compatible = "ti,bq20z65", "sbs,sbs-battery";
> + reg = <0x0b>;
> +
> + sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
> + sbs,i2c-retry-count = <5>;
> +
> + power-supplies = <&charger>;
> + };
> +
> + codec: audio-codec@1a {
> + compatible = "dlg,da7212";
> + reg = <0x1a>;
> + #sound-dai-cells = <0>;
> + VDDA-supply = <®_2v5_audio>;
> + VDDSP-supply = <®_5v0_audio>;
> + VDDMIC-supply = <®_3v3_audio>;
> + VDDIO-supply = <®_3v3_audio>;
> + clocks = <&clk_ext_audio_codec>;
> + clock-names = "mclk";
> + };
> +};
> +
> +&i2c5 {
> + tmp75: temperature-sensor@48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + vs-supply = <®_3v3>;
> + interrupt-parent = <&tca6424a>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> + tca6424a: gpio-controller@22 {
> + compatible = "ti,tca6424";
> + reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + vcc-supply = <®_3v3>;
> +
> + interrupt-parent = <&gpio7>;
> + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_gpio6>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
> + "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
> + "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
> + "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
> + "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
> + "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
> +
> + };
> +};
> +
> +&fec {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&audmux {
Sort them alphabetically.
> + status = "okay";
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&usbotg {
> + vbus-supply = <&usb_power>;
> + disable-over-current;
> + dr_mode = "host";
> + status = "okay";
> +
> + /*
> + * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
> + * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
> + * from &usbh1. This means, that we cannot easily detect and handle
> + * over-current events. Fortunately the regulator limits the current
> + * automatically, so the hardware is still protected.
> + */
> +};
> +
> +&pwm4 {
> + status = "okay";
> +};
> +
> +&ldb {
> + status = "okay";
> +
> + lvds0: lvds-channel@0 {
> + status = "okay";
We generally end property list with 'status'.
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <24>;
> +
> + port@4 {
> + reg = <4>;
Have a newline between property list and child node.
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&usdhc4 {
> + /* WiFi module */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc4>;
> +
> + bus-width = <4>;
> + no-1-8-v;
> + non-removable;
> + wakeup-source;
> + keep-power-in-suspend;
> + cap-power-off-card;
> + max-frequency = <25000000>;
> + vmmc-supply = <®_wlan>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wlcore: wlcore@2 {
> + compatible = "ti,wl1837";
> + reg = <2>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_q7_gpio7>;
> +
> + interrupt-parent = <&gpio4>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
> +
> + tcxo-clock-frequency = <26000000>;
> + };
> +
Unneeded newline.
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
> new file mode 100644
> index 000000000000..b4c6fbd802fb
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for General Electric B1x5v2
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6dl-b1x5pv2.dtsi"
> +
> +/ {
> + reg_3v3_acm: regulator-3v3-acm {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3 ACM";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + vin-supply = <®_3v3>;
> + };
> +};
> +
> +&i2c1 {
> + tca6416: gpio-controller@21 {
> + compatible = "ti,tca6416";
> + reg = <0x21>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + vcc-supply = <®_3v3_acm>;
> +
> + /*
> + * TCA6424 cannot handle low type interrupts at the moment and
> + * it cannot be added without quite a few hacks. Since this
> + * controller does not have any input type GPIOs, pretend that
> + * the interrupt pin is unconnected.
> + */
> + //interrupt-parent = <&tca6424a>;
> + //interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> + //interrupt-controller;
> + //#interrupt-cells = <2>;
Maintain commented code out-of-tree please.
> +
> + reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
> +
> + gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
> + "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
> + "ACM2_CL2", "", "", "",
> + "", "", "", "";
> + };
> +};
> +
> +&i2c5 {
> + mpl3115a2: pressure-sensor@60 {
> + compatible = "fsl,mpl3115";
> + reg = <0x60>;
> +
> + vcc-supply = <®_3v3_acm>;
> +
> + /* The MPL3115 binding does not yet support interrupts */
> + //interrupt-parent = <&tca6424a>;
> + //interrupts = <22 IRQ_TYPE_EDGE_RISING 23 IRQ_TYPE_EDGE_RISING>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
> new file mode 100644
> index 000000000000..575dad47bf72
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
> @@ -0,0 +1,624 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +//
> +// Device Tree Source for i.MX6DL based congatec QMX6
> +//
> +// Copyright 2018-2021 General Electric Company
> +// Copyright 2018-2021 Collabora
> +// Copyright 2016 congatec AG
> +
> +#include "imx6dl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> + memory@...00000 {
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + reg_3p3v: 3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + i2cmux {
> + compatible = "i2c-mux-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
> + i2c-parent = <&i2c2>;
> +
> + i2c5: i2c@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c6: i2c@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
Is it supported?
> + cs-gpios = <&gpio3 19 0>;
Use define for polarity.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "sst,sst25vf032b", "jedec,spi-nor";
> + spi-max-frequency = <20000000>;
> + reg = <0>;
> +
> + partition@0 {
> + label = "bootloader";
> + reg = <0x0000000 0x100000>;
> + };
> +
> + partition@...000 {
> + label = "user";
> + reg = <0x0100000 0x2fc000>;
> + };
> +
> + partition@...000 {
> + label = "reserved";
> + reg = <0x03fc000 0x4000>;
> + read-only;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
> + phy-mode = "rgmii-id";
> + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
> + fsl,magic-packet;
> + phy-handle = <&phy0>;
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy@6 {
> + reg = <6>;
> + qca,clk-out-frequency = <125000000>;
> + };
> + };
> +};
> +
> +&i2c6 {
> + pmic@8 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /*
> + * keep VGEN3, VGEN4 and VGEN5 enabled in order to
> + * maintain backward compatibility with hw-rev. A.0
> + */
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + /* supply voltage for eMMC */
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&pcie {
> + reset-gpio = <&gpio1 20 0>;
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> +
> + audmux_ssi1 {
> + fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
> + fsl,port-config = <
> + (IMX_AUDMUX_V2_PTCR_TFSDIR |
> + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
> + IMX_AUDMUX_V2_PTCR_TCLKDIR |
> + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
> + IMX_AUDMUX_V2_PTCR_SYN)
> + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
> + >;
> + };
> +
> + audmux_aud6 {
> + fsl,audmux-port = <MX51_AUDMUX_PORT6>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN
> + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
> + >;
> + };
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> + <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
> + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + pinctrl-1 = <&pinctrl_i2c1_gpio>;
> + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + pinctrl-1 = <&pinctrl_i2c2_gpio>;
> + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + pinctrl-1 = <&pinctrl_i2c3_gpio>;
> + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +
> + status = "okay";
> +
> + rtc: m41t62@68 {
> + compatible = "st,m41t62";
> + reg = <0x68>;
> +
> + rtc_sqw: clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> + };
> +};
> +
> +&clks {
> + clocks = <&rtc_sqw>;
> + clock-names = "ckil";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> +};
> +
> +®_arm {
> + vin-supply = <&sw1a_reg>;
> +};
> +
> +®_pu {
> + vin-supply = <&sw1c_reg>;
> +};
> +
> +®_soc {
> + vin-supply = <&sw1c_reg>;
> +};
> +
> +&snvs_poweroff {
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + /* MicroSD card slot */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> + no-1-8-v;
> + keep-power-in-suspend;
> + wakeup-source;
> + vmmc-supply = <®_3p3v>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + /* eMMC module */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + non-removable;
> + bus-width = <8>;
> + no-1-8-v;
> + keep-power-in-suspend;
> + wakeup-source;
> + vmmc-supply = <®_3p3v>;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
> + vbus-supply = <®_5v>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + qmx6mux: imx6qdl-qmx6 {
> + };
What is this for?
> +};
> +
> +&qmx6mux {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */
> + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */
> + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */
> + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */
> + >;
> + };
> +
> + /* Watchdog output signal */
> + pinctrl_wdog: wdoggrp {
Sort pinctrl nodes alphabetically.
Shawn
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
> + >;
> + };
> +
> + pinctrl_q7_hda_rst: hdarstgrp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */
> + >;
> + };
> +
> + pinctrl_q7_backlight_enable: blengrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */
> + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 /* Q7[59] HDA_SYNC */
> + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 /* Q7[65] HDA_SDI */
> + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 /* Q7[63] HDA_BITCLK */
> + >;
> + };
> +
> + /* SPI bus does not leave System on Module */
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
> + >;
> + };
> +
> + /* PHY is on System on Module, Q7[3-15] have Ethernet lines */
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + >;
> + };
> +
> + /* RGMII Phy Reset */
> + pinctrl_phy_reset: phyrstgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */
> + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */
> + >;
> + };
> +
> + pinctrl_i2c1_gpio: i2c1gpiogrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */
> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */
> + >;
> + };
> +
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
> + >;
> + };
> +
> + pinctrl_i2c2_gpio: i2c2gpiogrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
> + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */
> + >;
> + };
> +
> + pinctrl_i2c3_gpio: i2c3gpiogrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */
> + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */
> + >;
> + };
> +
> + pinctrl_pwm4: pwm4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
> + >;
> + };
> +
> + /* Debug connector on Q7 module */
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */
> + >;
> + };
> +
> + /* µSD card slot on Q7 module */
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */
> + >;
> + };
> +
> + /* eMMC module on Q7 module */
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
> + >;
> + };
> +
> +
> + pinctrl_usdhc4: usdhc4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */
> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */
> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */
> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */
> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */
> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */
> + >;
> + };
> +
> + pinctrl_q7_slp_btn: q7slpbtngrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */
> + >;
> + };
> +
> + pinctrl_q7_sdio_pwr: q7sdiopwrgrp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */
> + >;
> + };
> +
> + pinctrl_q7_gpio0: q7gpio0grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */
> + >;
> + };
> +
> + pinctrl_q7_gpio1: q7gpio1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */
> + >;
> + };
> +
> + pinctrl_q7_gpio2: q7gpio2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */
> + >;
> + };
> +
> + pinctrl_q7_gpio3: q7gpio3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */
> + >;
> + };
> +
> + pinctrl_q7_gpio4: q7gpio4grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */
> + >;
> + };
> +
> + pinctrl_q7_gpio5: q7gpio5grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */
> + >;
> + };
> +
> + pinctrl_q7_gpio6: q7gpio6grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */
> + >;
> + };
> +
> + pinctrl_q7_gpio7: q7gpio7grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */
> + >;
> + };
> +
> + pinctrl_q7_lcd_power: lcdpwrgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */
> + >;
> + };
> +
> + pinctrl_q7_spi_cs1: spics1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */
> + >;
> + };
> +};
> --
> 2.30.2
>
Powered by blists - more mailing lists