linux-kernel - Re: [PATCH net v3] r8152: check the informaton of the device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 24 May 2021 10:00:38 +0200
From:   Johan Hovold <johan@...nel.org>
To:     Hayes Wang <hayeswang@...ltek.com>
Cc:     kuba@...nel.org, davem@...emloft.net, netdev@...r.kernel.org,
        nic_swsd@...ltek.com, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org,
        syzbot+95afd23673f5dd295c57@...kaller.appspotmail.com
Subject: Re: [PATCH net v3] r8152: check the informaton of the device

On Mon, May 24, 2021 at 02:49:42PM +0800, Hayes Wang wrote:
> Verify some fields of the USB descriptor to make sure the driver
> could be used by the device.
> 
> Besides, remove the check of endpoint number in rtl8152_probe().
> usb_find_common_endpoints() includes it.
> 
> BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
> Reported-by: syzbot+95afd23673f5dd295c57@...kaller.appspotmail.com
> Fixes: c2198943e33b ("r8152: search the configuration of vendor mode")
> Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
> ---
> v3:
> Remove the check of endpoint number in rtl_check_vendor_ok().
> 
> Adjust the error message and ccommit message.
> 
> v2:
> Use usb_find_common_endpoints() and usb_endpoint_num() to replace original
> code.
> 
> remove the check of endpoint number in rtl8152_probe(). It has been done
> in rtl_check_vendor_ok().
> 
>  drivers/net/usb/r8152.c | 42 ++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 37 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 136ea06540ff..f6abb2fbf972 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -8107,6 +8107,37 @@ static void r8156b_init(struct r8152 *tp)
>  	tp->coalesce = 15000;	/* 15 us */
>  }
>  
> +static bool rtl_check_vendor_ok(struct usb_interface *intf)
> +{
> +	struct usb_host_interface *alt = intf->cur_altsetting;
> +	struct usb_endpoint_descriptor *in, *out, *intr;
> +
> +	if (usb_find_common_endpoints(alt, &in, &out, &intr, NULL) < 0) {
> +		dev_err(&intf->dev, "Expected endpoints are not found\n");
> +		return false;
> +	}
> +
> +	/* Check Rx endpoint address */
> +	if (usb_endpoint_num(in) != 1) {
> +		dev_err(&intf->dev, "Invalid Rx endpoint address\n");
> +		return false;
> +	}
> +
> +	/* Check Tx endpoint address */
> +	if (usb_endpoint_num(out) != 2) {
> +		dev_err(&intf->dev, "Invalid Tx endpoint address\n");
> +		return false;
> +	}
> +
> +	/* Check interrupt endpoint address */
> +	if (usb_endpoint_num(intr) != 3) {
> +		dev_err(&intf->dev, "Invalid interrupt endpoint address\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
>  static bool rtl_vendor_mode(struct usb_interface *intf)
>  {
>  	struct usb_host_interface *alt = intf->cur_altsetting;
> @@ -8115,12 +8146,15 @@ static bool rtl_vendor_mode(struct usb_interface *intf)
>  	int i, num_configs;
>  
>  	if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC)
> -		return true;
> +		return rtl_check_vendor_ok(intf);
>  
>  	/* The vendor mode is not always config #1, so to find it out. */
>  	udev = interface_to_usbdev(intf);
>  	c = udev->config;
>  	num_configs = udev->descriptor.bNumConfigurations;
> +	if (num_configs < 2)
> +		return false;
> +

Nit: This check looks unnecessary also as the driver can handle a single
configuration just fine, and by removing it you'd be logging "Unexpected
Device\n" below also in the single config case.

>  	for (i = 0; i < num_configs; (i++, c++)) {
>  		struct usb_interface_descriptor	*desc = NULL;
>  
> @@ -8135,7 +8169,8 @@ static bool rtl_vendor_mode(struct usb_interface *intf)
>  		}
>  	}
>  
> -	WARN_ON_ONCE(i == num_configs);
> +	if (i == num_configs)
> +		dev_err(&intf->dev, "Unexpected Device\n");
>  
>  	return false;
>  }
> @@ -9381,9 +9416,6 @@ static int rtl8152_probe(struct usb_interface *intf,
>  	if (!rtl_vendor_mode(intf))
>  		return -ENODEV;
>  
> -	if (intf->cur_altsetting->desc.bNumEndpoints < 3)
> -		return -ENODEV;
> -
>  	usb_reset_device(udev);
>  	netdev = alloc_etherdev(sizeof(struct r8152));
>  	if (!netdev) {

Other than that, looks good to me now.

Reviewed-by: Johan Hovold <johan@...nel.org>

Johan