linux-kernel - [PATCH v2 6/6] scsi: ufs: Update the fast abort path in ufshcd

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1621846046-22204-7-git-send-email-cang@codeaurora.org>
Date:   Mon, 24 May 2021 01:47:25 -0700
From:   Can Guo <cang@...eaurora.org>
To:     asutoshd@...eaurora.org, nguyenb@...eaurora.org,
        hongwus@...eaurora.org, linux-scsi@...r.kernel.org,
        kernel-team@...roid.com, cang@...eaurora.org
Cc:     Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Stanley Chu <stanley.chu@...iatek.com>,
        Bean Huo <beanhuo@...ron.com>,
        Jaegeuk Kim <jaegeuk@...nel.org>,
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 6/6] scsi: ufs: Update the fast abort path in ufshcd_abort() for PM requests

If PM requests fail during runtime suspend/resume, RPM framework saves the
error to dev->power.runtime_error. Before the runtime_error gets cleared,
runtime PM on this specific device won't work again, leaving the device
in either suspended or active state permanently.

When task abort happens to a PM request sent during runtime suspend/resume,
even if it can be successfully aborted, RPM framework anyways saves the
(TIMEOUT) error. But we want more and we can do better - let error handling
recover and clear the runtime_error. So, let PM requests take the fast
abort path in ufshcd_abort().

Signed-off-by: Can Guo <cang@...eaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 9a3bc04..8312b31 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2731,7 +2731,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		 * err handler blocked for too long. So, just fail the scsi cmd
 		 * sent from PM ops, err handler can recover PM error anyways.
 		 */
-		if (hba->wl_pm_op_in_progress) {
+		if (cmd->request->rq_flags & RQF_PM) {
 			hba->force_reset = true;
 			set_host_byte(cmd, DID_BAD_TARGET);
 			cmd->scsi_done(cmd);
@@ -2764,7 +2764,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		(hba->clk_gating.state != CLKS_ON));
 
 	if (unlikely(test_bit(tag, &hba->outstanding_reqs))) {
-		if (hba->wl_pm_op_in_progress)
+		if (cmd->request->rq_flags & RQF_PM)
 			set_host_byte(cmd, DID_BAD_TARGET);
 		else
 			err = SCSI_MLQUEUE_HOST_BUSY;
@@ -6982,11 +6982,14 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 	int err = 0;
 	struct ufshcd_lrb *lrbp;
 	u32 reg;
+	bool need_eh = false;
 
 	host = cmd->device->host;
 	hba = shost_priv(host);
 	tag = cmd->request->tag;
 	lrbp = &hba->lrb[tag];
+
+	dev_info(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag);
 	if (!ufshcd_valid_tag(hba, tag)) {
 		dev_err(hba->dev,
 			"%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p",
@@ -7004,9 +7007,6 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
-	/* Print Transfer Request of aborted task */
-	dev_info(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag);
-
 	/*
 	 * Print detailed info about aborted request.
 	 * As more than one request might get aborted at the same time,
@@ -7034,21 +7034,21 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 	}
 
 	/*
-	 * Task abort to the device W-LUN is illegal. When this command
-	 * will fail, due to spec violation, scsi err handling next step
-	 * will be to send LU reset which, again, is a spec violation.
-	 * To avoid these unnecessary/illegal steps, first we clean up
-	 * the lrb taken by this cmd and re-set it in outstanding_reqs,
-	 * then queue the eh_work and bail.
+	 * This fast path guarantees the cmd always gets aborted successfully,
+	 * meanwhile it invokes the error handler. It allows contexts, which
+	 * are blocked by this cmd, to fail fast. It serves multiple purposes:
+	 * #1 To avoid unnecessary/illagal abort attempts to the W-LU.
+	 * #2 To avoid live lock between eh_work and specific contexts, i.e.,
+	 *    suspend/resume and eh_work itself.
+	 * #3 To let eh_work recover runtime PM error in case abort happens
+	 *    to cmds sent from runtime suspend/resume ops.
 	 */
-	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) {
+	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN ||
+	    (cmd->request->rq_flags & RQF_PM)) {
 		ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun);
 		__ufshcd_transfer_req_compl(hba, (1UL << tag));
 		set_bit(tag, &hba->outstanding_reqs);
-		spin_lock_irqsave(host->host_lock, flags);
-		hba->force_reset = true;
-		ufshcd_schedule_eh_work(hba);
-		spin_unlock_irqrestore(host->host_lock, flags);
+		need_eh = true;
 		goto out;
 	}
 
@@ -7062,6 +7062,12 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 cleanup:
 		__ufshcd_transfer_req_compl(hba, (1UL << tag));
 out:
+		if (cmd->request->rq_flags & RQF_PM || need_eh) {
+			spin_lock_irqsave(host->host_lock, flags);
+			hba->force_reset = true;
+			ufshcd_schedule_eh_work(hba);
+			spin_unlock_irqrestore(host->host_lock, flags);
+		}
 		err = SUCCESS;
 	} else {
 		dev_err(hba->dev, "%s: failed with err %d\n", __func__, err);
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.