[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210524122111.416885-1-carnil@debian.org>
Date: Mon, 24 May 2021 14:21:11 +0200
From: Salvatore Bonaccorso <carnil@...ian.org>
To: Maxime Ripard <maxime@...no.tech>,
Jernej Škrabec <jernej.skrabec@...l.net>,
Rob Herring <robh+dt@...nel.org>,
Chen-Yu Tsai <wens@...nel.org>
Cc: Vagrant Cascadian <vagrant@...roducible-builds.org>,
"B.R. Oake" <broake@...lfence.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
linux-arm-kernel@...ts.infradead.org,
Salvatore Bonaccorso <carnil@...ian.org>
Subject: [PATCH] ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the Orange Pi Plus board this is "rgmii", which is the
wrong setting.
Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.
Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
Reported-by: "B.R. Oake" <broake@...lfence.com>
Reported-by: Vagrant Cascadian <vagrant@...roducible-builds.org>
Link: https://bugs.debian.org/988574
Signed-off-by: Salvatore Bonaccorso <carnil@...ian.org>
---
v2:
- Add a Reported-by for "B.R. Oake" <broake@...lfence.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 97f497854e05..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
--
2.32.0.rc0
Powered by blists - more mailing lists