[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210524134517.687089-1-martin.blumenstingl@googlemail.com>
Date: Mon, 24 May 2021 15:45:17 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: jbrunet@...libre.com, linux-amlogic@...ts.infradead.org
Cc: narmstrong@...libre.com, mturquette@...libre.com, sboyd@...nel.org,
khilman@...libre.com, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
parent which is actually used is vid_pll_final_div. This should be set
using assigned-clock-parents in the .dts rather than removing some
"unwanted" clock parents from the clock driver.
Suggested-by: Jerome Brunet <jbrunet@...libre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
After a hint from Jerome (thanks) this is the improved version of
"clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
[0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@googlemail.com/
drivers/clk/meson/meson8b.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index a844d35b553a..0f8bd707217a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
.ops = &clk_regmap_mux_ro_ops,
.parent_hws = meson8b_vclk_mux_parent_hws,
.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
@@ -1358,7 +1358,7 @@ static struct clk_regmap meson8b_vclk2_in_sel = {
.ops = &clk_regmap_mux_ro_ops,
.parent_hws = meson8b_vclk_mux_parent_hws,
.num_parents = ARRAY_SIZE(meson8b_vclk_mux_parent_hws),
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
--
2.31.1
Powered by blists - more mailing lists