Message-ID: <5ce3b5a5-1500-0d95-623e-299e7b1eb43b@roeck-us.net>
Date:   Tue, 25 May 2021 12:52:23 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Romain Perier <romain.perier@...il.com>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Daniel Palmer <daniel@...f.com>,
        Mohammed Billoo <mohammed.billoo@...il.com>,
        linux-watchdog@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] watchdog: Add Mstar MSC313e WDT driver

On 5/25/21 11:44 AM, Romain Perier wrote:
> From: Daniel Palmer <daniel@...f.com>
> 
> It adds a driver for the IP block handling the watchdog timer found for
> Mstar MSC313e SoCs and newer.
> 
> Signed-off-by: Daniel Palmer <daniel@...f.com>
> Co-developed-by: Romain Perier <romain.perier@...il.com>
> Signed-off-by: Romain Perier <romain.perier@...il.com>
> ---
>   MAINTAINERS                    |   1 +
>   drivers/watchdog/Kconfig       |  13 +++
>   drivers/watchdog/Makefile      |   1 +
>   drivers/watchdog/msc313e_wdt.c | 173 +++++++++++++++++++++++++++++++++
>   4 files changed, 188 insertions(+)
>   create mode 100644 drivers/watchdog/msc313e_wdt.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a0f37adb9e64..fcc10c57298c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2177,6 +2177,7 @@ F:	arch/arm/mach-mstar/
>   F:	drivers/clk/mstar/
>   F:	drivers/gpio/gpio-msc313.c
>   F:	drivers/pinctrl/pinctrl-msc313.c
> +F:	drivers/watchdog/msc313e_wdt.c
>   F:	include/dt-bindings/clock/mstar-*
>   F:	include/dt-bindings/gpio/msc313-gpio.h
>   F:	include/soc/mstar/
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 355100dad60a..f53634ea0de6 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -980,6 +980,19 @@ config VISCONTI_WATCHDOG
>   	  Say Y here to include support for the watchdog timer in Toshiba
>   	  Visconti SoCs.
>   
> +config MSC313E_WATCHDOG
> +	tristate "MStar MSC313e watchdog"
> +	depends on ARCH_MSTARV7 || COMPILE_TEST
> +	depends on OF
> +	select WATCHDOG_CORE
> +	help
> +	  Say Y here to include support for the Watchdog timer embedded
> +	  into MStar MSC313e chips. This will reboot your system when the
> +	  timeout is reached.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called msc313e_wdt.
> +
>   # X86 (i386 + ia64 + x86_64) Architecture
>   
>   config ACQUIRE_WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index a7eade8b4d45..7fa392ae3000 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -92,6 +92,7 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
>   obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
>   obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
>   obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
> +obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
>   
>   # X86 (i386 + ia64 + x86_64) Architecture
>   obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
> diff --git a/drivers/watchdog/msc313e_wdt.c b/drivers/watchdog/msc313e_wdt.c
> new file mode 100644
> index 000000000000..434259256967
> --- /dev/null
> +++ b/drivers/watchdog/msc313e_wdt.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MStar WDT driver
> + *
> + * Copyright (C) 2019 - 2021 Daniel Palmer
> + * Copyright (C) 2021 Romain Perier
> + *
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>

Alphabetic order, please. Also, pelase drop unneeded include files.
The driver doesn't support interrupts, so any interrupt related
include file is unnecessary. I also don't see any devicetree specific
code except for of_device_id, and that is declared in mod_devicetable.h,
not in an of_xxx.h include file.

> +
> +#define REG_WDT_CLR			0x0
> +#define REG_WDT_MAX_PRD_L		0x10
> +#define REG_WDT_MAX_PRD_H		0x14
> +
> +#define MSC313E_WDT_DEFAULT_TIMEOUT	30
> +/* Supports 1 - 350 sec */

Doesn't that depend on the clock freqneucy ?
More on that see below.

> +#define MSC313E_WDT_MIN_TIMEOUT		1
> +#define MSC313E_WDT_MAX_TIMEOUT		350
> +
> +static unsigned int timeout;
> +
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
> +
> +struct msc313e_wdt_priv {
> +	void __iomem *base;
> +	struct device *dev;

I don't immediately see where 'dev' is used.

> +	struct watchdog_device wdev;
> +	struct clk *clk;
> +};
> +
> +static int msc313e_wdt_start(struct watchdog_device *wdev)
> +{
> +	struct msc313e_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +	u32 timeout;
> +	int err;
> +
> +	err = clk_prepare_enable(priv->clk);
> +	if (err) {
> +		dev_err(priv->dev, "failed to enable clock\n");

Ah, here. I am not sure if I like that error message - it is going to be
persistent and may create a lot of noise if it is ever seen, and pretty much
useless otherwise. Either case, if you insist on the message, I'd suggest
to use wdev->parent.

> +		return err;
> +	}
> +	timeout = wdev->timeout * clk_get_rate(priv->clk);

How is it guaranteed that this won't overflow ? The maximum timeout is not
tied to the clock frequency. This will overflow if the clock frequency is
above 0xffffffff / 350 = 12271335 Hz and the timeout is sufficiently large.

> +	writew(timeout & 0xffff, priv->base + REG_WDT_MAX_PRD_L);
> +	writew((timeout >> 16) & 0xffff, priv->base + REG_WDT_MAX_PRD_H);
> +	writew(1, priv->base + REG_WDT_CLR);
> +	return 0;
> +}
> +
> +static int msc313e_wdt_ping(struct watchdog_device *wdev)
> +{
> +	struct msc313e_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	writew(1, priv->base + REG_WDT_CLR);
> +	return 0;
> +}
> +
> +static int msc313e_wdt_stop(struct watchdog_device *wdev)
> +{
> +	struct msc313e_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	writew(0, priv->base + REG_WDT_MAX_PRD_L);
> +	writew(0, priv->base + REG_WDT_MAX_PRD_H);
> +	writew(0, priv->base + REG_WDT_CLR);
> +	clk_disable_unprepare(priv->clk);
> +	return 0;
> +}
> +
> +static int msc313e_wdt_settimeout(struct watchdog_device *wdev, unsigned int new_time)
> +{
> +	wdev->timeout = new_time;
> +
> +	return msc313e_wdt_start(wdev);
> +}
> +
> +static const struct watchdog_info msc313e_wdt_ident = {
> +	.identity = "MSC313e watchdog",
> +	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
> +};
> +
> +static const struct watchdog_ops msc313e_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = msc313e_wdt_start,
> +	.stop = msc313e_wdt_stop,
> +	.ping = msc313e_wdt_ping,
> +	.set_timeout = msc313e_wdt_settimeout,
> +};
> +
> +static const struct of_device_id msc313e_wdt_of_match[] = {
> +	{ .compatible = "mstar,msc313e-wdt", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, msc313e_wdt_of_match);
> +
> +static int msc313e_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct msc313e_wdt_priv *priv;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(priv->clk)) {
> +		dev_err(dev, "No input clock\n");
> +		return PTR_ERR(priv->clk);
> +	}
> +
> +	priv->dev = dev;
> +	priv->wdev.info = &msc313e_wdt_ident,
> +	priv->wdev.ops = &msc313e_wdt_ops,
> +	priv->wdev.parent = dev;
> +	priv->wdev.min_timeout = MSC313E_WDT_MIN_TIMEOUT;
> +	priv->wdev.max_timeout = MSC313E_WDT_MAX_TIMEOUT;
> +	priv->wdev.timeout = MSC313E_WDT_DEFAULT_TIMEOUT;
> +
> +	watchdog_set_drvdata(&priv->wdev, priv);
> +
> +	watchdog_init_timeout(&priv->wdev, timeout, dev);
> +	watchdog_stop_on_reboot(&priv->wdev);
> +	watchdog_stop_on_unregister(&priv->wdev);
> +
> +	return devm_watchdog_register_device(dev, &priv->wdev);
> +}
> +
> +static int __maybe_unused msc313e_wdt_suspend(struct device *dev)
> +{
> +	struct msc313e_wdt_priv *priv = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(&priv->wdev))
> +		msc313e_wdt_stop(&priv->wdev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused msc313e_wdt_resume(struct device *dev)
> +{
> +	struct msc313e_wdt_priv *priv = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(&priv->wdev))
> +		msc313e_wdt_start(&priv->wdev);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(msc313e_wdt_pm_ops, msc313e_wdt_suspend, msc313e_wdt_resume);
> +
> +static struct platform_driver msc313e_wdt_driver = {
> +	.driver = {
> +		.name = "msc313e-wdt",
> +		.of_match_table = msc313e_wdt_of_match,
> +		.pm = &msc313e_wdt_pm_ops,
> +	},
> +	.probe = msc313e_wdt_probe,
> +};
> +module_platform_driver(msc313e_wdt_driver);
> +
> +MODULE_AUTHOR("Daniel Palmer <daniel@...ngy.jp>");
> +MODULE_DESCRIPTION("Watchdog driver for MStar MSC313e");
> +MODULE_LICENSE("GPL v2");
> 

Powered by blists - more mailing lists