Message-ID: <877djnaq11.fsf@stealth>
Date:   Tue, 25 May 2021 22:42:18 +0900
From:   Punit Agrawal <punitagrawal@...il.com>
To:     Ard Biesheuvel <ardb@...nel.org>
Cc:     Robin Murphy <robin.murphy@....com>,
        Alexandru Elisei <alexandru.elisei@....com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-rockchip@...ts.infradead.org,
        arm-mail-list <linux-arm-kernel@...ts.infradead.org>,
        Heiko Stuebner <heiko.stuebner@...obroma-systems.com>,
        leobras.c@...il.com, Rob Herring <robh@...nel.org>,
        PCI <linux-pci@...r.kernel.org>
Subject: Re: [BUG] rockpro64: PCI BAR reassignment broken by commit
 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit
 memory addresses")

Hi Ard,

Ard Biesheuvel <ardb@...nel.org> writes:

> On Sun, 23 May 2021 at 13:06, Punit Agrawal <punitagrawal@...il.com> wrote:
>>
>> Robin Murphy <robin.murphy@....com> writes:
>>
>> > [ +linux-pci for visibility ]
>> >
>> > On 2021-05-18 10:09, Alexandru Elisei wrote:
>> >> After doing a git bisect I was able to trace the following error when booting my
>> >> rockpro64 v2 (rk3399 SoC) with a PCIE NVME expansion card:
>> >> [..]
>> >> [    0.305183] rockchip-pcie f8000000.pcie: host bridge /pcie@...00000 ranges:
>> >> [    0.305248] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff ->
>> >> 0x00fa000000
>> >> [    0.305285] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff ->
>> >> 0x00fbe00000
>> >> [    0.306201] rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy
>> >> regulator
>> >> [    0.306334] rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy
>> >> regulator
>> >> [    0.373705] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
>> >> [    0.373730] pci_bus 0000:00: root bus resource [bus 00-1f]
>> >> [    0.373751] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
>> >> [    0.373777] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus
>> >> address [0xfbe00000-0xfbefffff])
>> >> [    0.373839] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
>> >> [    0.373973] pci 0000:00:00.0: supports D1
>> >> [    0.373992] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
>> >> [    0.378518] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]),
>> >> reconfiguring
>> >> [    0.378765] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
>> >> [    0.378869] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
>> >> [    0.379051] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
>> >> [    0.379661] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by
>> >> 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe
>> >> x4 link)
>> >> [    0.393269] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
>> >> [    0.393311] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
>> >> [    0.393333] pci 0000:00:00.0: BAR 14: failed to assign [mem size 0x00100000]
>> >> [    0.393356] pci 0000:01:00.0: BAR 0: no space for [mem size 0x00004000 64bit]
>> >> [    0.393375] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00004000 64bit]
>> >> [    0.393397] pci 0000:00:00.0: PCI bridge to [bus 01]
>> >> [    0.393839] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
>> >> [    0.394165] pcieport 0000:00:00.0: AER: enabled with IRQ 78
>> >> [..]
>> >> to the commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to
>> >> resource flags for
>> >> 64-bit memory addresses").
>> >
>> > FWFW, my hunch is that the host bridge advertising no 32-bit memory
>> > resource, only only a single 64-bit non-prefetchable one (even though
>> > it's entirely below 4GB) might be a bit weird and tripping something
>> > up in the resource assignment code. It certainly seems like the thing
>> > most directly related to the offending commit.
>> >
>> > I'd be tempted to try fiddling with that in the DT (i.e. changing
>> > 0x83000000 to 0x82000000 in the PCIe node's "ranges" property) to see
>> > if it makes any difference. Note that even if it helps, though, I
>> > don't know whether that's the correct fix or just a bodge around a
>> > corner-case bug somewhere in the resource code.
>>
>> From digging into this further the failure seems to be due to a mismatch
>> of flags when allocating resources in pci_bus_alloc_from_region() -
>>
>>     if ((res->flags ^ r->flags) & type_mask)
>>             continue;
>>
>> Though I am also not sure why the failure is only being reported on
>> RK3399 - does a single 64-bit window have anything to do with it?
>>
>
> The NVMe in the example exposes a single 64-bit non-prefetchable BAR.
> Such BARs can not be allocated in a prefetchable host bridge window
> (unlike the converse, i.e., allocating a prefetchable BAR in a
> non-prefetchable host bridge window is fine)
>
> 64-bit non-prefetchable host bridge windows cannot be forwarded by PCI
> to PCI bridges, they simply lack the BAR registers to describe them.
> Therefore, non-prefetchable endpoint BARs (even 64-bit ones) need to
> be carved out of a host bridge's non-prefetchable 32-bit window if
> they need to pass through a bridge.

Thank you for the explanation. I also looked at the PCI-to-PCI Bridge
spec to understand where some of the limitations are coming from.

> So the error seems to be here that the host bridge's 32-bit
> non-prefetchable window has the 64-bit attribute set, even though it
> resides below 4 GB entirely. I suppose that the resource allocation
> could be made more forgiving (and it was in the past, before commit
> 9d57e61bf723 was applied). However, I would strongly recommend not
> deviating from common practice, and just describe the 32-bit
> addressable non-prefetchable resource window as such.

IIUC, the host bridge's configuration (64-bit on non-prefetchable
window) is based on what the hardware advertises.

Can you elaborate on what you have in mind to correct the
non-prefetchable resource window? Are you thinking of adding a quirk
somewhere to address this?

I am happy to put something together once I understand the preferred way
to go about it.

Thanks,
Punit

[...]

Powered by blists - more mailing lists