[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e4c41fa3-6739-ab4f-51bf-74ede67749bb@ti.com>
Date: Wed, 26 May 2021 20:30:37 +0530
From: Aswath Govindraju <a-govindraju@...com>
To: Sanket Parmar <sparmar@...ence.com>, <peter.chen@...nel.org>
CC: <pawell@...ence.com>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <kurahul@...ence.com>,
<gregkh@...uxfoundation.org>, <kishon@...com>
Subject: Re: [PATCH] usb: cdns3: Enable TDL_CHK only for OUT ep
Hi Peter,
On 17/05/21 8:35 pm, Sanket Parmar wrote:
> ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
> as TDL source for IN endpoints. To fix it, TDL_CHK is only
> enabled for OUT endpoints.
>
> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
> Reported-by: Aswath Govindraju <a-govindraju@...com>
> Signed-off-by: Sanket Parmar <sparmar@...ence.com>
> ---
May I know if this patch will be picked up as a bug fix for -rc.
Thanks,
Aswath
> drivers/usb/cdns3/cdns3-gadget.c | 8 +++-----
> 1 files changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
> index 105855a..f3c0276 100644
> --- a/drivers/usb/cdns3/cdns3-gadget.c
> +++ b/drivers/usb/cdns3/cdns3-gadget.c
> @@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
> else
> mask = BIT(priv_ep->num);
>
> - if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
> + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
> cdns3_set_register_bit(®s->tdl_from_trb, mask);
> cdns3_set_register_bit(®s->tdl_beh, mask);
> cdns3_set_register_bit(®s->tdl_beh2, mask);
> @@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
> case USB_ENDPOINT_XFER_INT:
> ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
>
> - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
> - priv_dev->dev_ver > DEV_VER_V2)
> + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
> ep_cfg |= EP_CFG_TDL_CHK;
> break;
> case USB_ENDPOINT_XFER_BULK:
> ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
>
> - if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
> - priv_dev->dev_ver > DEV_VER_V2)
> + if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
> ep_cfg |= EP_CFG_TDL_CHK;
> break;
> default:
>
Powered by blists - more mailing lists