lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210527161252.16620-4-patrice.chotard@foss.st.com>
Date:   Thu, 27 May 2021 18:12:52 +0200
From:   <patrice.chotard@...s.st.com>
To:     Mark Brown <broonie@...nel.org>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Boris Brezillon <boris.brezillon@...labora.com>,
        <linux-mtd@...ts.infradead.org>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        <linux-spi@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     <patrice.chotard@...s.st.com>, <christophe.kerello@...s.st.com>
Subject: [PATCH v3 3/3] mtd: spinand: add SPI-NAND MTD resume handler

From: Patrice Chotard <patrice.chotard@...s.st.com>

After power up, all SPI NAND's blocks are locked. Only read operations
are allowed, write and erase operations are forbidden.
The SPI NAND framework unlocks all the blocks during its initialization.

During a standby low power, the memory is powered down, losing its
configuration.
During the resume, the QSPI driver state is restored but the SPI NAND
framework does not reconfigured the memory.

This patch adds SPI-NAND MTD PM handlers for resume ops.
SPI NAND resume op re-initializes SPI NAND flash to its probed state.

Signed-off-by: Christophe Kerello <christophe.kerello@...s.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@...s.st.com>
---
Changes in v3:
  - Add spinand_read_cfg() call to repopulate cache

Changes in v2:
  - Add helper spinand_block_unlock().
  - Add spinand_ecc_enable() call.
  - Remove some dev_err().
  - Fix commit's title and message.

 drivers/mtd/nand/spi/core.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 1f699ad84f1b..e3fcbcf381c3 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1099,6 +1099,38 @@ static int spinand_block_unlock(struct spinand_device *spinand)
 	return ret;
 }
 
+static void spinand_mtd_resume(struct mtd_info *mtd)
+{
+	struct spinand_device *spinand = mtd_to_spinand(mtd);
+	int ret;
+
+	ret = spinand_reset_op(spinand);
+	if (ret)
+		return;
+
+	ret = spinand_read_cfg(spinand);
+	if (ret)
+		return;
+
+	ret = spinand_init_quad_enable(spinand);
+	if (ret)
+		return;
+
+	ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0);
+	if (ret)
+		return;
+
+	ret = spinand_manufacturer_init(spinand);
+	if (ret)
+		return;
+
+	ret = spinand_block_unlock(spinand);
+	if (ret)
+		return;
+
+	spinand_ecc_enable(spinand, false);
+}
+
 static int spinand_init(struct spinand_device *spinand)
 {
 	struct device *dev = &spinand->spimem->spi->dev;
@@ -1186,6 +1218,7 @@ static int spinand_init(struct spinand_device *spinand)
 	mtd->_block_isreserved = spinand_mtd_block_isreserved;
 	mtd->_erase = spinand_mtd_erase;
 	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
+	mtd->_resume = spinand_mtd_resume;
 
 	if (nand->ecc.engine) {
 		ret = mtd_ooblayout_count_freebytes(mtd);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ