lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210527032444.3204054-4-george.cherian@marvell.com>
Date:   Thu, 27 May 2021 08:54:42 +0530
From:   George Cherian <george.cherian@...vell.com>
To:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <kuba@...nel.org>, <davem@...emloft.net>, <gcherian@...vell.com>,
        <sgoutham@...vell.com>
Subject: [net-next PATCHv2 3/5] octeontx2-af: adding new lt def registers support

From: Harman Kalra <hkalra@...vell.com>

CN10k introduces following new LT DEF registers:
1. APAD (alignment padding) LT DEF registers are
enhancement to existing apad calculation algorithm
where not just ipv4 and ipv6 but also other protocols
can be matched and required alignment can be added by NIX.

2. ET LT DEF register defines layer information in NPC_RESULT_S
to identify the Ethertype location in L2 header. Used for
Ethertype overwriting in inline IPsec flow.

This patch adds required structures and some header changes. Also
strict version check (based on minor field) is imposed to highlight
version mismatch between the kernel headers and KPU profile.

Signed-off-by: Harman Kalra <hkalra@...vell.com>
Signed-off-by: Jerin Jacob Kollanukkaran <jerinj@...vell.com>
Signed-off-by: Kiran Kumar Kokkilagadda <kirankumark@...vell.com>
Signed-off-by: George Cherian <george.cherian@...vell.com>
---
 .../net/ethernet/marvell/octeontx2/af/npc.h   | 32 ++++++++++++++++-
 .../marvell/octeontx2/af/npc_profile.h        | 26 +++++++++++++-
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 34 +++++++++++++++++++
 .../ethernet/marvell/octeontx2/af/rvu_npc.c   | 20 ++++++++++-
 .../ethernet/marvell/octeontx2/af/rvu_reg.h   |  4 ++-
 5 files changed, 112 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index db40b1d780ec..d5837ec91d1e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -468,6 +468,29 @@ struct npc_lt_def_ipsec {
 	u8	spi_nz;
 };
 
+struct npc_lt_def_apad {
+	u8	ltype_mask;
+	u8	ltype_match;
+	u8	lid;
+	u8	valid;
+} __packed;
+
+struct npc_lt_def_color {
+	u8	ltype_mask;
+	u8	ltype_match;
+	u8	lid;
+	u8	noffset;
+	u8	offset;
+} __packed;
+
+struct npc_lt_def_et {
+	u8	ltype_mask;
+	u8	ltype_match;
+	u8	lid;
+	u8	valid;
+	u8	offset;
+} __packed;
+
 struct npc_lt_def_cfg {
 	struct npc_lt_def	rx_ol2;
 	struct npc_lt_def	rx_oip4;
@@ -485,7 +508,14 @@ struct npc_lt_def_cfg {
 	struct npc_lt_def	pck_oip4;
 	struct npc_lt_def	pck_oip6;
 	struct npc_lt_def	pck_iip4;
-};
+	struct npc_lt_def_apad	rx_apad0;
+	struct npc_lt_def_apad	rx_apad1;
+	struct npc_lt_def_color	rx_ovlan;
+	struct npc_lt_def_color	rx_ivlan;
+	struct npc_lt_def_color	rx_gen0_color;
+	struct npc_lt_def_color	rx_gen1_color;
+	struct npc_lt_def_et	rx_et[2];
+} __packed;
 
 /* Loadable KPU profile firmware data */
 struct npc_kpu_profile_fwdata {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
index de3a60c12392..980435e5a00a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
@@ -11,7 +11,7 @@
 #ifndef NPC_PROFILE_H
 #define NPC_PROFILE_H
 
-#define NPC_KPU_PROFILE_VER	0x0000000100050000
+#define NPC_KPU_PROFILE_VER	0x0000000100060000
 #define NPC_KPU_VER_MAJ(ver)	((u16)(((ver) >> 32) & 0xFFFF))
 #define NPC_KPU_VER_MIN(ver)	((u16)(((ver) >> 16) & 0xFFFF))
 #define NPC_KPU_VER_PATCH(ver)	((u16)((ver) & 0xFFFF))
@@ -13480,6 +13480,30 @@ static const struct npc_lt_def_cfg npc_lt_defaults = {
 			.ltype_match = NPC_LT_LG_TU_IP,
 			.ltype_mask = 0x0F,
 	},
+	.rx_apad0 = {
+		.valid = 0,
+		.lid = NPC_LID_LC,
+		.ltype_match = NPC_LT_LC_IP6,
+		.ltype_mask = 0x0F,
+	},
+	.rx_apad1 = {
+		.valid = 0,
+		.lid = NPC_LID_LC,
+		.ltype_match = NPC_LT_LC_IP6,
+		.ltype_mask = 0x0F,
+	},
+	.rx_et = {
+		{
+			.lid = NPC_LID_LB,
+			.ltype_match = NPC_LT_NA,
+			.ltype_mask = 0x0,
+		},
+		{
+			.lid = NPC_LID_LB,
+			.ltype_match = NPC_LT_NA,
+			.ltype_mask = 0x0,
+		},
+	},
 };
 
 static struct npc_mcam_kex npc_mkex_default = {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 0a8bd667cb11..174ef09f9069 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -3523,6 +3523,40 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 			    (ltdefs->rx_isctp.lid << 8) | (ltdefs->rx_isctp.ltype_match << 4) |
 			    ltdefs->rx_isctp.ltype_mask);
 
+		if (!is_rvu_otx2(rvu)) {
+			/* Enable APAD calculation for other protocols
+			 * matching APAD0 and APAD1 lt def registers.
+			 */
+			rvu_write64(rvu, blkaddr, NIX_AF_RX_DEF_CST_APAD0,
+				    (ltdefs->rx_apad0.valid << 11) |
+				    (ltdefs->rx_apad0.lid << 8) |
+				    (ltdefs->rx_apad0.ltype_match << 4) |
+				    ltdefs->rx_apad0.ltype_mask);
+			rvu_write64(rvu, blkaddr, NIX_AF_RX_DEF_CST_APAD1,
+				    (ltdefs->rx_apad1.valid << 11) |
+				    (ltdefs->rx_apad1.lid << 8) |
+				    (ltdefs->rx_apad1.ltype_match << 4) |
+				    ltdefs->rx_apad1.ltype_mask);
+
+			/* Receive ethertype defination register defines layer
+			 * information in NPC_RESULT_S to identify the Ethertype
+			 * location in L2 header. Used for Ethertype overwriting
+			 * in inline IPsec flow.
+			 */
+			rvu_write64(rvu, blkaddr, NIX_AF_RX_DEF_ET(0),
+				    (ltdefs->rx_et[0].offset << 12) |
+				    (ltdefs->rx_et[0].valid << 11) |
+				    (ltdefs->rx_et[0].lid << 8) |
+				    (ltdefs->rx_et[0].ltype_match << 4) |
+				    ltdefs->rx_et[0].ltype_mask);
+			rvu_write64(rvu, blkaddr, NIX_AF_RX_DEF_ET(1),
+				    (ltdefs->rx_et[1].offset << 12) |
+				    (ltdefs->rx_et[1].valid << 11) |
+				    (ltdefs->rx_et[1].lid << 8) |
+				    (ltdefs->rx_et[1].ltype_match << 4) |
+				    ltdefs->rx_et[1].ltype_mask);
+		}
+
 		err = nix_rx_flowkey_alg_cfg(rvu, blkaddr);
 		if (err)
 			return err;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 61df80cfed1a..a5dc2ac8bc4a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -1365,6 +1365,19 @@ static int npc_apply_custom_kpu(struct rvu *rvu,
 			 NPC_KPU_VER_MAJ(NPC_KPU_PROFILE_VER));
 		return -EINVAL;
 	}
+	/* Verify if profile is aligned with the required kernel changes */
+	if (NPC_KPU_VER_MIN(profile->version) <
+	    NPC_KPU_VER_MIN(NPC_KPU_PROFILE_VER)) {
+		dev_warn(rvu->dev,
+			 "Invalid KPU profile version: %d.%d.%d expected vesion <= %d.%d.%d\n",
+			 NPC_KPU_VER_MAJ(profile->version),
+			 NPC_KPU_VER_MIN(profile->version),
+			 NPC_KPU_VER_PATCH(profile->version),
+			 NPC_KPU_VER_MAJ(NPC_KPU_PROFILE_VER),
+			 NPC_KPU_VER_MIN(NPC_KPU_PROFILE_VER),
+			 NPC_KPU_VER_PATCH(NPC_KPU_PROFILE_VER));
+		return -EINVAL;
+	}
 	/* Verify if profile fits the HW */
 	if (fw->kpus > profile->kpus) {
 		dev_warn(rvu->dev, "Not enough KPUs: %d > %ld\n", fw->kpus,
@@ -1443,6 +1456,7 @@ static void npc_load_kpu_profile(struct rvu *rvu)
 	struct npc_kpu_profile_adapter *profile = &rvu->kpu;
 	const char *kpu_profile = rvu->kpu_pfl_name;
 	const struct firmware *fw = NULL;
+	bool retry_fwdb = false;
 
 	/* If user not specified profile customization */
 	if (!strncmp(kpu_profile, def_pfl_name, KPU_NAME_LEN))
@@ -1464,6 +1478,7 @@ static void npc_load_kpu_profile(struct rvu *rvu)
 			rvu->kpu_fwdata_sz = fw->size;
 		}
 		release_firmware(fw);
+		retry_fwdb = true;
 		goto program_kpu;
 	}
 
@@ -1488,7 +1503,10 @@ static void npc_load_kpu_profile(struct rvu *rvu)
 			}
 			rvu->kpu_fwdata = NULL;
 			rvu->kpu_fwdata_sz = 0;
-			goto load_image_fwdb;
+			if (retry_fwdb) {
+				retry_fwdb = false;
+				goto load_image_fwdb;
+			}
 		}
 
 		dev_warn(rvu->dev,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index ac71c0f2f960..ce365ae80352 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -208,7 +208,7 @@
 #define NIX_AF_RVU_INT_ENA_W1S		(0x01D0)
 #define NIX_AF_RVU_INT_ENA_W1C		(0x01D8)
 #define NIX_AF_TCP_TIMER		(0x01E0)
-#define NIX_AF_RX_WQE_TAG_CTL		(0x01F0)
+#define NIX_AF_RX_DEF_ET(a)		(0x01F0ull | (uint64_t)(a) << 3)
 #define NIX_AF_RX_DEF_OL2		(0x0200)
 #define NIX_AF_RX_DEF_OIP4		(0x0210)
 #define NIX_AF_RX_DEF_IIP4		(0x0220)
@@ -219,8 +219,10 @@
 #define NIX_AF_RX_DEF_OUDP		(0x0270)
 #define NIX_AF_RX_DEF_IUDP		(0x0280)
 #define NIX_AF_RX_DEF_OSCTP		(0x0290)
+#define NIX_AF_RX_DEF_CST_APAD0		(0x0298)
 #define NIX_AF_RX_DEF_ISCTP		(0x02A0)
 #define NIX_AF_RX_DEF_IPSECX		(0x02B0)
+#define NIX_AF_RX_DEF_CST_APAD1		(0x02A8)
 #define NIX_AF_RX_IPSEC_GEN_CFG		(0x0300)
 #define NIX_AF_RX_CPTX_INST_ADDR	(0x0310)
 #define NIX_AF_NDC_TX_SYNC		(0x03F0)
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ