[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210527040146.GE9971@aspeedtech.com>
Date: Thu, 27 May 2021 12:01:47 +0800
From: Steven Lee <steven_lee@...eedtech.com>
To: Andrew Jeffery <andrew@...id.au>
CC: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@...ts.ozlabs.org>,
open list <linux-kernel@...r.kernel.org>,
Hongwei Zhang <Hongweiz@....com>,
Ryan Chen <ryan_chen@...eedtech.com>,
Billy Tsai <billy_tsai@...eedtech.com>
Subject: Re: [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
The 05/27/2021 09:27, Andrew Jeffery wrote:
> Hi Steven,
>
> On Wed, 26 May 2021, at 19:16, Steven Lee wrote:
> > AST2600 supports 2 SGPIO master interfaces one with 128 pins another one
> > with 80 pins.
>
> Is there any chance the serial GPIO controllers can be explicitly
> listed in the Memory Space Allocation Table of the datasheet? Currently
> they're covered by the entry for "GPIO Controller (Parallel GPIO)"
> which is listed as ranging from 0x1e780000-0x1e7807ff.
>
I've forwarded your suggestion to designers.
Per the discussion with designers, they may change the
GPIO controller description of Memory Space Allocation Table to
"GPIO Controller (including Parallel and Serial GPIO)".
> Admittedly the details are listed in chapter 41 for the GPIO
> Controller, but it would be handy to not have to dig.
>
> >
> > Signed-off-by: Steven Lee <steven_lee@...eedtech.com>
> > ---
> > arch/arm/boot/dts/aspeed-g6.dtsi | 32 ++++++++++++++++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> > index f96607b7b4e2..556ce9535c22 100644
> > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> > @@ -377,6 +377,38 @@
> > #interrupt-cells = <2>;
> > };
> >
> > + sgpiom0: sgpiom@...80500 {
> > + #gpio-cells = <2>;
> > + gpio-controller;
> > + compatible = "aspeed,ast2600-sgpiom";
> > + reg = <0x1e780500 0x100>;
> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> > + max-ngpios = <128>;
>
> I need to think more about this one.
>
> Andrew
Powered by blists - more mailing lists