[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210527075407.3180744-1-martin.kepplinger@puri.sm>
Date: Thu, 27 May 2021 09:54:04 +0200
From: Martin Kepplinger <martin.kepplinger@...i.sm>
To: laurent.pinchart@...asonboard.com, mchehab@...nel.org,
robh@...nel.org
Cc: shawnguo@...nel.org, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, slongerbeam@...il.com, kernel@...i.sm,
krzk@...nel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-staging@...ts.linux.dev,
Martin Kepplinger <martin.kepplinger@...i.sm>
Subject: [PATCH v1 0/3] media: imx: add support for imx8mq MIPI RX
This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.
It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
I'll send the sensor driver I'm using (that will use this code via the
imx8mq-librem5 board) later, if that's ok.
Thanks Laurent, who helped a lot. I'm happy for any feedback,
martin
Martin Kepplinger (3):
dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
controller
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
.../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 151 +++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 102 ++
drivers/staging/media/imx/Makefile | 1 +
drivers/staging/media/imx/imx8mq-mipi-csi2.c | 1023 +++++++++++++++++
4 files changed, 1277 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c
--
2.30.2
Powered by blists - more mailing lists