[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210527082905.1447591-2-jay.xu@rock-chips.com>
Date: Thu, 27 May 2021 16:29:03 +0800
From: Jianqun Xu <jay.xu@...k-chips.com>
To: heiko@...ech.de, lee.jones@...aro.org, ulf.hansson@...aro.org,
robh+dt@...nel.org
Cc: devicetree@...r.kernel.org, jbx6244@...il.com,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Jianqun Xu <jay.xu@...k-chips.com>
Subject: [PATCH v2 1/3] dt-bindings: soc: rockchip: convert io-domain.txt to YAML
This patch moves the rockchip-io-domain.txt from power/avs dir to soc
dir and rename to io-domain.txt, without any change in the step.
Then covert the io-domain.txt to YAML.
Signed-off-by: Jianqun Xu <jay.xu@...k-chips.com>
---
v2:
- first version
.../bindings/power/rockchip-io-domain.txt | 135 ------------------
.../bindings/soc/rockchip/io-domain.yaml | 45 ++++++
2 files changed, 45 insertions(+), 135 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/rockchip-io-domain.txt
create mode 100644 Documentation/devicetree/bindings/soc/rockchip/io-domain.yaml
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
deleted file mode 100644
index e66fd4eab71c..000000000000
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Rockchip SRAM for IO Voltage Domains:
--------------------------------------
-
-IO domain voltages on some Rockchip SoCs are variable but need to be
-kept in sync between the regulators and the SoC using a special
-register.
-
-A specific example using rk3288:
-- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
- bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
- that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
-
-Said another way, this driver simply handles keeping bits in the SoC's
-general register file (GRF) in sync with the actual value of a voltage
-hooked up to the pins.
-
-Note that this driver specifically doesn't include:
-- any logic for deciding what voltage we should set regulators to
-- any logic for deciding whether regulators (or internal SoC blocks)
- should have power or not have power
-
-If there were some other software that had the smarts of making
-decisions about regulators, it would work in conjunction with this
-driver. When that other software adjusted a regulator's voltage then
-this driver would handle telling the SoC about it. A good example is
-vqmmc for SD. In that case the dw_mmc driver simply is told about a
-regulator. It changes the regulator between 3.3V and 1.8V at the
-right time. This driver notices the change and makes sure that the
-SoC is on the same page.
-
-
-Required properties:
-- compatible: should be one of:
- - "rockchip,px30-io-voltage-domain" for px30
- - "rockchip,px30-pmu-io-voltage-domain" for px30 pmu-domains
- - "rockchip,rk3188-io-voltage-domain" for rk3188
- - "rockchip,rk3228-io-voltage-domain" for rk3228
- - "rockchip,rk3288-io-voltage-domain" for rk3288
- - "rockchip,rk3328-io-voltage-domain" for rk3328
- - "rockchip,rk3368-io-voltage-domain" for rk3368
- - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- - "rockchip,rk3399-io-voltage-domain" for rk3399
- - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
- - "rockchip,rv1108-io-voltage-domain" for rv1108
- - "rockchip,rv1108-pmu-io-voltage-domain" for rv1108 pmu-domains
-
-Deprecated properties:
-- rockchip,grf: phandle to the syscon managing the "general register files"
- Systems should move the io-domains to a sub-node of the grf simple-mfd.
-
-You specify supplies using the standard regulator bindings by including
-a phandle the relevant regulator. All specified supplies must be able
-to report their voltage. The IO Voltage Domain for any non-specified
-supplies will be not be touched.
-
-Possible supplies for PX30:
-- vccio6-supply: The supply connected to VCCIO6.
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-- vccio5-supply: The supply connected to VCCIO5.
-- vccio-oscgpi-supply: The supply connected to VCCIO_OSCGPI.
-
-Possible supplies for PX30 pmu-domains:
-- pmuio1-supply: The supply connected to PMUIO1.
-- pmuio2-supply: The supply connected to PMUIO2.
-
-Possible supplies for rk3188:
-- ap0-supply: The supply connected to AP0_VCC.
-- ap1-supply: The supply connected to AP1_VCC.
-- cif-supply: The supply connected to CIF_VCC.
-- flash-supply: The supply connected to FLASH_VCC.
-- lcdc0-supply: The supply connected to LCD0_VCC.
-- lcdc1-supply: The supply connected to LCD1_VCC.
-- vccio0-supply: The supply connected to VCCIO0.
-- vccio1-supply: The supply connected to VCCIO1.
- Sometimes also labeled VCCIO1 and VCCIO2.
-
-Possible supplies for rk3228:
-- vccio1-supply: The supply connected to VCCIO1.
-- vccio2-supply: The supply connected to VCCIO2.
-- vccio3-supply: The supply connected to VCCIO3.
-- vccio4-supply: The supply connected to VCCIO4.
-
-Possible supplies for rk3288:
-- audio-supply: The supply connected to APIO4_VDD.
-- bb-supply: The supply connected to APIO5_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- flash1-supply: The supply connected to FLASH1_VDD. Also known as SDIO1.
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO2_VDD.
-- lcdc-supply: The supply connected to LCDC_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368:
-- audio-supply: The supply connected to APIO3_VDD.
-- dvp-supply: The supply connected to DVPIO_VDD.
-- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
-- gpio30-supply: The supply connected to APIO1_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-- sdcard-supply: The supply connected to SDMMC0_VDD.
-- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0.
-
-Possible supplies for rk3368 pmu-domains:
-- pmu-supply: The supply connected to PMUIO_VDD.
-- vop-supply: The supply connected to LCDC_VDD.
-
-Possible supplies for rk3399:
-- bt656-supply: The supply connected to APIO2_VDD.
-- audio-supply: The supply connected to APIO5_VDD.
-- sdmmc-supply: The supply connected to SDMMC0_VDD.
-- gpio1830 The supply connected to APIO4_VDD.
-
-Possible supplies for rk3399 pmu-domains:
-- pmu1830-supply:The supply connected to PMUIO2_VDD.
-
-Example:
-
- io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcc18_codec>;
- bb-supply = <&vcc33_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc18_flashio>;
- gpio1830-supply = <&vcc33_io>;
- gpio30-supply = <&vcc33_pmuio>;
- lcdc-supply = <&vcc33_lcd>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc18_wl>;
- };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/io-domain.yaml b/Documentation/devicetree/bindings/soc/rockchip/io-domain.yaml
new file mode 100644
index 000000000000..2931e0ea8fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/io-domain.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+ - Heiko Stuebner <heiko@...ech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - rockchip,px30-io-voltage-domain
+ - rockchip,px30-pmu-io-voltage-domain
+ - rockchip,rk3188-io-voltage-domain
+ - rockchip,rk3228-io-voltage-domain
+ - rockchip,rk3288-io-voltage-domain
+ - rockchip,rk3328-io-voltage-domain
+ - rockchip,rk3368-io-voltage-domain
+ - rockchip,rk3368-pmu-io-voltage-domain
+ - rockchip,rk3399-io-voltage-domain
+ - rockchip,rk3399-pmu-io-voltage-domain
+ - rockchip,rv1108-io-voltage-domain
+ - rockchip,rv1108-pmu-io-voltage-domain
+
+
+examples:
+ - |
+ io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+
+ audio-supply = <&vcc18_codec>;
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_pmuio>;
+ lcdc-supply = <&vcc33_lcd>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc18_wl>;
+ };
--
2.25.1
Powered by blists - more mailing lists