linux-kernel - [PATCH] spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1622110857-21812-1-git-send-email-zpershuai@gmail.com>
Date:   Thu, 27 May 2021 18:20:57 +0800
From:   zpershuai <zpershuai@...il.com>
To:     Mark Brown <broonie@...nel.org>,
        Michal Simek <michal.simek@...inx.com>,
        linux-spi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Cc:     zpershuai <zpershuai@...il.com>
Subject: [PATCH] spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code

In zynq_qspi_probe function, when enable the device clock is done,
the return of all the functions should goto the clk_dis_all label.

If num_cs is not right then this should return a negative error
code but currently it returns success.

Signed-off-by: zpershuai <zpershuai@...il.com>
---
 drivers/spi/spi-zynq-qspi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5a3d81c31d04..9262c6418463 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -678,14 +678,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
 	xqspi->irq = platform_get_irq(pdev, 0);
 	if (xqspi->irq <= 0) {
 		ret = -ENXIO;
-		goto remove_master;
+		goto clk_dis_all;
 	}
 	ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq,
 			       0, pdev->name, xqspi);
 	if (ret != 0) {
 		ret = -ENXIO;
 		dev_err(&pdev->dev, "request_irq failed\n");
-		goto remove_master;
+		goto clk_dis_all;
 	}
 
 	ret = of_property_read_u32(np, "num-cs",
@@ -693,8 +693,9 @@ static int zynq_qspi_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		ctlr->num_chipselect = 1;
 	} else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) {
+		ret = -EINVAL;
 		dev_err(&pdev->dev, "only 2 chip selects are available\n");
-		goto remove_master;
+		goto clk_dis_all;
 	} else {
 		ctlr->num_chipselect = num_cs;
 	}
-- 
2.17.1