linux-kernel - [PATCH v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210528114345.543761-1-vincent.knecht@mailoo.org>
Date:   Fri, 28 May 2021 13:43:45 +0200
From:   Vincent Knecht <vincent.knecht@...loo.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
        Vincent Knecht <vincent.knecht@...loo.org>
Subject: [PATCH v1] arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreen

Enable the MStar msg2638 touchscreen.

Signed-off-by: Vincent Knecht <vincent.knecht@...loo.org>
---
 .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 540b1fa4b260..670bd1bebd73 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -45,6 +45,24 @@ &blsp1_uart2 {
 	status = "okay";
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	touchscreen@26 {
+		compatible = "mstar,msg2638";
+		reg = <0x26>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_reset_default>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+		touchscreen-size-x = <2048>;
+		touchscreen-size-y = <2048>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -281,6 +299,14 @@ proximity_int_default: proximity-int-default {
 		bias-pull-up;
 	};
 
+	ts_int_reset_default: ts-int-reset-default {
+		pins = "gpio13", "gpio100";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default {
 		pins = "gpio69";
 		function = "gpio";
-- 
2.31.1