linux-kernel - Re: [PATCH v6 1/3] phy: core: Reword the comment specifying the units of max_link

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <615d3a2a-0dc2-0e87-fdac-e170542d33da@ti.com>
Date:   Mon, 31 May 2021 14:04:17 +0530
From:   Aswath Govindraju <a-govindraju@...com>
To:     Vinod Koul <vkoul@...nel.org>
CC:     <linux-can@...r.kernel.org>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Lokesh Vutla <lokeshvutla@...com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>,
        <linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 1/3] phy: core: Reword the comment specifying the units
 of max_link_rate to be Mbps

Hi Vinod,

On 31/05/21 12:48 pm, Vinod Koul wrote:
> On 10-05-21, 10:40, Aswath Govindraju wrote:
>> In some subsystems (eg. CAN, SPI), the max link rate supported can be less
>> than 1 Mbps and if the unit for max_link_rate is Mbps then it can't be
>> used. Therefore, leave the decision of units to be used, to the producer
>> and consumer.
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@...com>
>> Acked-by: Marc Kleine-Budde <mkl@...gutronix.de>
>> ---
>>  include/linux/phy/phy.h | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
>> index 0ed434d02196..f3286f4cd306 100644
>> --- a/include/linux/phy/phy.h
>> +++ b/include/linux/phy/phy.h
>> @@ -125,7 +125,7 @@ struct phy_ops {
>>  /**
>>   * struct phy_attrs - represents phy attributes
>>   * @bus_width: Data path width implemented by PHY
>> - * @max_link_rate: Maximum link rate supported by PHY (in Mbps)
>> + * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
> 
> So there are a few users of max_link_rate. It would be better that we
> document all previous users of max_link_rate that unit is in Mbps and
> then modify it here
> 

I was able to see that the max_link_rate attribute was used at,

drivers/phy/cadence/phy-cadence-torrent.c:2514:
gphy->attrs.max_link_rate = cdns_phy->max_bit_rate;

and in the bindings there is indication that the units to be used is Mbps.

Can you please point me if there is any other place that I might have
missed to look at or that might need documentation update?

Thanks,
Aswath