lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 31 May 2021 15:34:38 +0200
From:   Stephan Gerhold <stephan@...hold.net>
To:     Chanwoo Choi <cw00.choi@...sung.com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>
Cc:     Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Nikita Travkin <nikita@...n.ru>,
        ~postmarketos/upstreaming@...ts.sr.ht,
        Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH v2 6/6] extcon: sm5502: Add support for SM5504

SM5504 is another MUIC from Silicon Mitus that is fairly similar
to SM5502. They seem to use the same register set, but:

  - SM5504 has some additional bits in SM5502_REG_CONTROL
  - SM5504 has a quite different set of interrupts
  - SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7)

Overall it's minor and we can support this using the existing
enum sm5502_types plus a few switch/if statements.

Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
Changes in v2: Fix warning: cast to smaller integer type 'enum sm5502_types'
               from 'const void *' [-Wvoid-pointer-to-enum-cast]
               reported by kernel test robot

Interestingly enough the register set (and especially the interrupts)
also look *very* similar to Richtek RT8973A (extcon-rt8973a) but
I didn't investigate this further.

Note that the changes in this patch are mostly based on guesswork
based on a SM5504 driver from Nitin Chaudhary [1] used in some Samsung
vendor kernels, since I was not able to find a public datasheet for SM5504.

[1]: https://github.com/NitinChaudharyUSC/MSM8x16_8x26/blob/master/drivers/misc/sm5504.c
---
 drivers/extcon/Kconfig         |   2 +-
 drivers/extcon/extcon-sm5502.c | 164 +++++++++++++++++++++++++++++----
 drivers/extcon/extcon-sm5502.h |  79 ++++++++++++++++
 3 files changed, 228 insertions(+), 17 deletions(-)

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index e3db936becfd..c69d40ae5619 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -154,7 +154,7 @@ config EXTCON_RT8973A
 	  from abnormal high input voltage (up to 28V).
 
 config EXTCON_SM5502
-	tristate "Silicon Mitus SM5502 EXTCON support"
+	tristate "Silicon Mitus SM5502/SM5504 EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 9f40bb9f1f81..49a35db61112 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -40,6 +40,7 @@ struct sm5502_muic_info {
 	struct i2c_client *i2c;
 	struct regmap *regmap;
 
+	enum sm5502_types type;
 	struct regmap_irq_chip_data *irq_data;
 	struct muic_irq *muic_irqs;
 	unsigned int num_muic_irqs;
@@ -90,6 +91,33 @@ static struct reg_data sm5502_reg_data[] = {
 	},
 };
 
+/* Default value of SM5504 register to bring up MUIC device. */
+static struct reg_data sm5504_reg_data[] = {
+	{
+		.reg = SM5502_REG_RESET,
+		.val = SM5502_REG_RESET_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_INTMASK1,
+		.val = SM5504_REG_INTM1_ATTACH_MASK
+			| SM5504_REG_INTM1_DETACH_MASK,
+		.invert = false,
+	}, {
+		.reg = SM5502_REG_INTMASK2,
+		.val = SM5504_REG_INTM2_RID_CHG_MASK
+			| SM5504_REG_INTM2_UVLO_MASK
+			| SM5504_REG_INTM2_POR_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_CONTROL,
+		.val = SM5502_REG_CONTROL_MANUAL_SW_MASK
+			| SM5504_REG_CONTROL_CHGTYP_MASK
+			| SM5504_REG_CONTROL_USBCHDEN_MASK
+			| SM5504_REG_CONTROL_ADC_EN_MASK,
+		.invert = true,
+	},
+};
+
 /* List of detectable cables */
 static const unsigned int sm5502_extcon_cable[] = {
 	EXTCON_USB,
@@ -198,6 +226,55 @@ static const struct regmap_irq_chip sm5502_muic_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(sm5502_irqs),
 };
 
+/* List of supported interrupt for SM5504 */
+static struct muic_irq sm5504_muic_irqs[] = {
+	{ SM5504_IRQ_INT1_ATTACH,	"muic-attach" },
+	{ SM5504_IRQ_INT1_DETACH,	"muic-detach" },
+	{ SM5504_IRQ_INT1_CHG_DET,	"muic-chg-det" },
+	{ SM5504_IRQ_INT1_DCD_OUT,	"muic-dcd-out" },
+	{ SM5504_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
+	{ SM5504_IRQ_INT1_CONNECT,	"muic-connect" },
+	{ SM5504_IRQ_INT1_ADC_CHG,	"muic-adc-chg" },
+	{ SM5504_IRQ_INT2_RID_CHG,	"muic-rid-chg" },
+	{ SM5504_IRQ_INT2_UVLO,		"muic-uvlo" },
+	{ SM5504_IRQ_INT2_POR,		"muic-por" },
+	{ SM5504_IRQ_INT2_OVP_FET,	"muic-ovp-fet" },
+	{ SM5504_IRQ_INT2_OCP_LATCH,	"muic-ocp-latch" },
+	{ SM5504_IRQ_INT2_OCP_EVENT,	"muic-ocp-event" },
+	{ SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
+};
+
+/* Define interrupt list of SM5504 to register regmap_irq */
+static const struct regmap_irq sm5504_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
+
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
+};
+
+static const struct regmap_irq_chip sm5504_muic_irq_chip = {
+	.name			= "sm5504",
+	.status_base		= SM5502_REG_INT1,
+	.mask_base		= SM5502_REG_INTMASK1,
+	.mask_invert		= false,
+	.num_regs		= 2,
+	.irqs			= sm5504_irqs,
+	.num_irqs		= ARRAY_SIZE(sm5504_irqs),
+};
+
 /* Define regmap configuration of SM5502 for I2C communication  */
 static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
 {
@@ -276,9 +353,14 @@ static int sm5502_muic_set_path(struct sm5502_muic_info *info,
 /* Return cable type of attached or detached accessories */
 static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 {
-	unsigned int cable_type, adc, dev_type1;
+	unsigned int cable_type, adc, dev_type1, otg_dev_type1;
 	int ret;
 
+	if (info->type == TYPE_SM5504)
+		otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK;
+	else
+		otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK;
+
 	/* Read ADC value according to external cable or button */
 	ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
 	if (ret) {
@@ -301,11 +383,9 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 			return ret;
 		}
 
-		switch (dev_type1) {
-		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+		if (dev_type1 == otg_dev_type1) {
 			cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
-			break;
-		default:
+		} else {
 			dev_dbg(info->dev,
 				"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
 				adc, dev_type1);
@@ -358,6 +438,11 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 			return ret;
 		}
 
+		if (dev_type1 == otg_dev_type1) {
+			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+			break;
+		}
+
 		switch (dev_type1) {
 		case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
 			cable_type = SM5502_MUIC_ADC_OPEN_USB;
@@ -365,9 +450,6 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 		case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
 			cable_type = SM5502_MUIC_ADC_OPEN_TA;
 			break;
-		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
-			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
-			break;
 		default:
 			dev_dbg(info->dev,
 				"cannot identify the cable type: adc(0x%x)\n",
@@ -497,6 +579,34 @@ static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
 	return 0;
 }
 
+static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+	switch (irq_type) {
+	case SM5504_IRQ_INT1_ATTACH:
+		info->irq_attach = true;
+		break;
+	case SM5504_IRQ_INT1_DETACH:
+		info->irq_detach = true;
+		break;
+	case SM5504_IRQ_INT1_CHG_DET:
+	case SM5504_IRQ_INT1_DCD_OUT:
+	case SM5504_IRQ_INT1_OVP_EVENT:
+	case SM5504_IRQ_INT1_CONNECT:
+	case SM5504_IRQ_INT1_ADC_CHG:
+	case SM5504_IRQ_INT2_RID_CHG:
+	case SM5504_IRQ_INT2_UVLO:
+	case SM5504_IRQ_INT2_POR:
+	case SM5504_IRQ_INT2_OVP_FET:
+	case SM5504_IRQ_INT2_OCP_LATCH:
+	case SM5504_IRQ_INT2_OCP_EVENT:
+	case SM5504_IRQ_INT2_OVP_OCP_EVENT:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
 {
 	struct sm5502_muic_info *info = data;
@@ -506,7 +616,10 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
 		if (irq == info->muic_irqs[i].virq)
 			irq_type = info->muic_irqs[i].irq;
 
-	ret = sm5502_parse_irq(info, irq_type);
+	if (info->type == TYPE_SM5504)
+		ret = sm5504_parse_irq(info, irq_type);
+	else
+		ret = sm5502_parse_irq(info, irq_type);
 	if (ret < 0) {
 		dev_warn(info->dev, "cannot handle is interrupt:%d\n",
 				    irq_type);
@@ -565,6 +678,7 @@ static void sm5502_init_dev_type(struct sm5502_muic_info *info)
 static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 {
 	struct device_node *np = i2c->dev.of_node;
+	const struct regmap_irq_chip *irq_chip;
 	struct sm5502_muic_info *info;
 	int i, ret, irq_flags;
 
@@ -579,10 +693,26 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 	info->dev = &i2c->dev;
 	info->i2c = i2c;
 	info->irq = i2c->irq;
-	info->muic_irqs = sm5502_muic_irqs;
-	info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
-	info->reg_data = sm5502_reg_data;
-	info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+	info->type = (uintptr_t)device_get_match_data(info->dev);
+
+	switch (info->type) {
+	case TYPE_SM5502:
+		irq_chip = &sm5502_muic_irq_chip;
+		info->muic_irqs = sm5502_muic_irqs;
+		info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
+		info->reg_data = sm5502_reg_data;
+		info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+		break;
+	case TYPE_SM5504:
+		irq_chip = &sm5504_muic_irq_chip;
+		info->muic_irqs = sm5504_muic_irqs;
+		info->num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs);
+		info->reg_data = sm5504_reg_data;
+		info->num_reg_data = ARRAY_SIZE(sm5504_reg_data);
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	mutex_init(&info->mutex);
 
@@ -598,8 +728,8 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 
 	/* Support irq domain for SM5502 MUIC device */
 	irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
-	ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq, irq_flags,
-				       0, &sm5502_muic_irq_chip, &info->irq_data);
+	ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
+				       irq_flags, 0, irq_chip, &info->irq_data);
 	if (ret != 0) {
 		dev_err(info->dev, "failed to request IRQ %d: %d\n",
 				    info->irq, ret);
@@ -660,7 +790,8 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 }
 
 static const struct of_device_id sm5502_dt_match[] = {
-	{ .compatible = "siliconmitus,sm5502-muic" },
+	{ .compatible = "siliconmitus,sm5502-muic", .data = (void *)TYPE_SM5502 },
+	{ .compatible = "siliconmitus,sm5504-muic", .data = (void *)TYPE_SM5504 },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -692,6 +823,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
 
 static const struct i2c_device_id sm5502_i2c_id[] = {
 	{ "sm5502", TYPE_SM5502 },
+	{ "sm5504", TYPE_SM5504 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index ce1f1ec310c4..0ce00274ed86 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -10,6 +10,7 @@
 
 enum sm5502_types {
 	TYPE_SM5502,
+	TYPE_SM5504,
 };
 
 /* SM5502 registers */
@@ -93,6 +94,13 @@ enum sm5502_reg {
 #define SM5502_REG_CONTROL_RAW_DATA_MASK	(0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT)
 #define SM5502_REG_CONTROL_SW_OPEN_MASK		(0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT)
 
+#define SM5504_REG_CONTROL_CHGTYP_SHIFT		5
+#define SM5504_REG_CONTROL_USBCHDEN_SHIFT	6
+#define SM5504_REG_CONTROL_ADC_EN_SHIFT		7
+#define SM5504_REG_CONTROL_CHGTYP_MASK		(0x1 << SM5504_REG_CONTROL_CHGTYP_SHIFT)
+#define SM5504_REG_CONTROL_USBCHDEN_MASK	(0x1 << SM5504_REG_CONTROL_USBCHDEN_SHIFT)
+#define SM5504_REG_CONTROL_ADC_EN_MASK		(0x1 << SM5504_REG_CONTROL_ADC_EN_SHIFT)
+
 #define SM5502_REG_INTM1_ATTACH_SHIFT		0
 #define SM5502_REG_INTM1_DETACH_SHIFT		1
 #define SM5502_REG_INTM1_KP_SHIFT		2
@@ -123,6 +131,36 @@ enum sm5502_reg {
 #define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK	(0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT)
 #define SM5502_REG_INTM2_MHL_MASK		(0x1 << SM5502_REG_INTM2_MHL_SHIFT)
 
+#define SM5504_REG_INTM1_ATTACH_SHIFT		0
+#define SM5504_REG_INTM1_DETACH_SHIFT		1
+#define SM5504_REG_INTM1_CHG_DET_SHIFT		2
+#define SM5504_REG_INTM1_DCD_OUT_SHIFT		3
+#define SM5504_REG_INTM1_OVP_EVENT_SHIFT	4
+#define SM5504_REG_INTM1_CONNECT_SHIFT		5
+#define SM5504_REG_INTM1_ADC_CHG_SHIFT		6
+#define SM5504_REG_INTM1_ATTACH_MASK		(0x1 << SM5504_REG_INTM1_ATTACH_SHIFT)
+#define SM5504_REG_INTM1_DETACH_MASK		(0x1 << SM5504_REG_INTM1_DETACH_SHIFT)
+#define SM5504_REG_INTM1_CHG_DET_MASK		(0x1 << SM5504_REG_INTM1_CHG_DET_SHIFT)
+#define SM5504_REG_INTM1_DCD_OUT_MASK		(0x1 << SM5504_REG_INTM1_DCD_OUT_SHIFT)
+#define SM5504_REG_INTM1_OVP_EVENT_MASK		(0x1 << SM5504_REG_INTM1_OVP_EVENT_SHIFT)
+#define SM5504_REG_INTM1_CONNECT_MASK		(0x1 << SM5504_REG_INTM1_CONNECT_SHIFT)
+#define SM5504_REG_INTM1_ADC_CHG_MASK		(0x1 << SM5504_REG_INTM1_ADC_CHG_SHIFT)
+
+#define SM5504_REG_INTM2_RID_CHG_SHIFT		0
+#define SM5504_REG_INTM2_UVLO_SHIFT		1
+#define SM5504_REG_INTM2_POR_SHIFT		2
+#define SM5504_REG_INTM2_OVP_FET_SHIFT		4
+#define SM5504_REG_INTM2_OCP_LATCH_SHIFT	5
+#define SM5504_REG_INTM2_OCP_EVENT_SHIFT	6
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT	7
+#define SM5504_REG_INTM2_RID_CHG_MASK		(0x1 << SM5504_REG_INTM2_RID_CHG_SHIFT)
+#define SM5504_REG_INTM2_UVLO_MASK		(0x1 << SM5504_REG_INTM2_UVLO_SHIFT)
+#define SM5504_REG_INTM2_POR_MASK		(0x1 << SM5504_REG_INTM2_POR_SHIFT)
+#define SM5504_REG_INTM2_OVP_FET_MASK		(0x1 << SM5504_REG_INTM2_OVP_FET_SHIFT)
+#define SM5504_REG_INTM2_OCP_LATCH_MASK		(0x1 << SM5504_REG_INTM2_OCP_LATCH_SHIFT)
+#define SM5504_REG_INTM2_OCP_EVENT_MASK		(0x1 << SM5504_REG_INTM2_OCP_EVENT_SHIFT)
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_MASK	(0x1 << SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT)
+
 #define SM5502_REG_ADC_SHIFT			0
 #define SM5502_REG_ADC_MASK			(0x1f << SM5502_REG_ADC_SHIFT)
 
@@ -199,6 +237,9 @@ enum sm5502_reg {
 #define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK		(0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT)
 #define SM5502_REG_DEV_TYPE1_USB_OTG_MASK		(0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT)
 
+#define SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT		0
+#define SM5504_REG_DEV_TYPE1_USB_OTG_MASK		(0x1 << SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT)
+
 #define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT		0
 #define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT		1
 #define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT		2
@@ -277,4 +318,42 @@ enum sm5502_irq {
 #define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK	BIT(4)
 #define SM5502_IRQ_INT2_MHL_MASK		BIT(5)
 
+/* SM5504 Interrupts */
+enum sm5504_irq {
+	/* INT1 */
+	SM5504_IRQ_INT1_ATTACH,
+	SM5504_IRQ_INT1_DETACH,
+	SM5504_IRQ_INT1_CHG_DET,
+	SM5504_IRQ_INT1_DCD_OUT,
+	SM5504_IRQ_INT1_OVP_EVENT,
+	SM5504_IRQ_INT1_CONNECT,
+	SM5504_IRQ_INT1_ADC_CHG,
+
+	/* INT2 */
+	SM5504_IRQ_INT2_RID_CHG,
+	SM5504_IRQ_INT2_UVLO,
+	SM5504_IRQ_INT2_POR,
+	SM5504_IRQ_INT2_OVP_FET,
+	SM5504_IRQ_INT2_OCP_LATCH,
+	SM5504_IRQ_INT2_OCP_EVENT,
+	SM5504_IRQ_INT2_OVP_OCP_EVENT,
+
+	SM5504_IRQ_NUM,
+};
+
+#define SM5504_IRQ_INT1_ATTACH_MASK		BIT(0)
+#define SM5504_IRQ_INT1_DETACH_MASK		BIT(1)
+#define SM5504_IRQ_INT1_CHG_DET_MASK		BIT(2)
+#define SM5504_IRQ_INT1_DCD_OUT_MASK		BIT(3)
+#define SM5504_IRQ_INT1_OVP_MASK		BIT(4)
+#define SM5504_IRQ_INT1_CONNECT_MASK		BIT(5)
+#define SM5504_IRQ_INT1_ADC_CHG_MASK		BIT(6)
+#define SM5504_IRQ_INT2_RID_CHG_MASK		BIT(0)
+#define SM5504_IRQ_INT2_UVLO_MASK		BIT(1)
+#define SM5504_IRQ_INT2_POR_MASK		BIT(2)
+#define SM5504_IRQ_INT2_OVP_FET_MASK		BIT(4)
+#define SM5504_IRQ_INT2_OCP_LATCH_MASK		BIT(5)
+#define SM5504_IRQ_INT2_OCP_EVENT_MASK		BIT(6)
+#define SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK	BIT(7)
+
 #endif /*  __LINUX_EXTCON_SM5502_H */
-- 
2.31.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ