lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210601102421.26581-2-cristian.marussi@arm.com>
Date:   Tue,  1 Jun 2021 11:24:17 +0100
From:   Cristian Marussi <cristian.marussi@....com>
To:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc:     sudeep.holla@....com, james.quinlan@...adcom.com,
        Jonathan.Cameron@...wei.com, f.fainelli@...il.com,
        etienne.carriere@...aro.org, vincent.guittot@...aro.org,
        souvik.chakravarty@....com, cristian.marussi@....com
Subject: [PATCH v2 1/5] firmware: arm_scmi: reset_rx_to_maxsz during async commands

During an async commands execution the rx buffer len is at first set to
max_msg_sz when the synchronous part of the command is first sent; once
the synchronous part completes the transport layer waits for the delayed
response which will be processed using the same xfer descriptor initially
allocated, but synchronous response received at the end of the xfer will
have shrunk the rx buffer len to the effective payload response length.

Raise the rx buffer length again to max_msg_sz while waiting for the
delayed response, while adding an informational error message.

Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
 drivers/firmware/arm_scmi/driver.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 66eb3f0e5daf..75141b90ae53 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -513,8 +513,16 @@ static int do_xfer_with_response(const struct scmi_protocol_handle *ph,
 	xfer->async_done = &async_response;
 
 	ret = do_xfer(ph, xfer);
-	if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout))
-		ret = -ETIMEDOUT;
+	if (!ret) {
+		/* rx.len would have been shrunk in the sync do_xfer above */
+		reset_rx_to_maxsz(ph, xfer);
+		if (!wait_for_completion_timeout(xfer->async_done, timeout)) {
+			dev_err(ph->dev,
+				"timed out in delayed resp(caller: %pS)\n",
+				(void *)_RET_IP_);
+			ret = -ETIMEDOUT;
+		}
+	}
 
 	xfer->async_done = NULL;
 	return ret;
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ