[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210602150009.17531-3-dariobin@libero.it>
Date: Wed, 2 Jun 2021 17:00:05 +0200
From: Dario Binacchi <dariobin@...ero.it>
To: linux-kernel@...r.kernel.org
Cc: Michael Turquette <mturquette@...libre.com>,
Tony Lindgren <tony@...mide.com>,
BenoƮt Cousson <bcousson@...libre.com>,
Dario Binacchi <dariobin@...ero.it>,
Tero Kristo <kristo@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh@...nel.org>, Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: [PATCH v7 2/5] dt-bindings: ti: dpll: add spread spectrum support
DT bindings for enabling and adjusting spread spectrum clocking have
been added.
Signed-off-by: Dario Binacchi <dariobin@...ero.it>
Reviewed-by: Rob Herring <robh@...nel.org>
---
(no changes since v4)
Changes in v4:
- Add Rob Herring review tag.
Changes in v3:
- Add '-hz' suffix to "ti,ssc-modfreq" binding.
.../devicetree/bindings/clock/ti/dpll.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index df57009ff8e7..37a7cb6ad07d 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -42,6 +42,11 @@ Required properties:
"idlest" - contains the idle status register base address
"mult-div1" - contains the multiplier / divider register base address
"autoidle" - contains the autoidle register base address (optional)
+ "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
+ the frequency spreading register base address (optional)
+ "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
+ the modulation frequency register base address
+ (optional)
ti,am3-* dpll types do not have autoidle register
ti,omap2-* dpll type does not support idlest / autoidle registers
@@ -51,6 +56,14 @@ Optional properties:
- ti,low-power-stop : DPLL supports low power stop mode, gating output
- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
- ti,lock : DPLL locks in programmed rate
+ - ti,min-div : the minimum divisor to start from to round the DPLL
+ target rate
+ - ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
+ spreading in permille (10th of a percent)
+ - ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
+ spectrum modulation frequency
+ - ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
+ to enable the downspread feature
Examples:
dpll_core_ck: dpll_core_ck@...00490 {
@@ -83,3 +96,10 @@ Examples:
clocks = <&sys_ck>, <&sys_ck>;
reg = <0x0500>, <0x0540>;
};
+
+ dpll_disp_ck: dpll_disp_ck {
+ #clock-cells = <0>;
+ compatible = "ti,am3-dpll-no-gate-clock";
+ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+ reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+ };
--
2.17.1
Powered by blists - more mailing lists