linux-kernel - [RESEND PATCH] pinctrl: single: config: enable the pin's input

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210602150420.18202-1-dariobin@libero.it>
Date:   Wed,  2 Jun 2021 17:04:20 +0200
From:   Dario Binacchi <dariobin@...ero.it>
To:     linux-kernel@...r.kernel.org
Cc:     Dario Binacchi <dariobin@...ero.it>,
        Haojian Zhuang <haojian.zhuang@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Tony Lindgren <tony@...mide.com>,
        linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        linux-omap@...r.kernel.org
Subject: [RESEND PATCH] pinctrl: single: config: enable the pin's input

It enables / disables the input buffer. As explained in the description
of 'enum pin_config_param' this does not affect the pin's ability to
drive output.

Signed-off-by: Dario Binacchi <dariobin@...ero.it>

---

 drivers/pinctrl/pinctrl-single.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 2c9c9835f375..4e7cdb9ee855 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -534,6 +534,7 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
 		case PIN_CONFIG_DRIVE_STRENGTH:
 		case PIN_CONFIG_SLEW_RATE:
 		case PIN_CONFIG_MODE_LOW_POWER:
+		case PIN_CONFIG_INPUT_ENABLE:
 		default:
 			*config = data;
 			break;
@@ -572,6 +573,7 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 			case PIN_CONFIG_DRIVE_STRENGTH:
 			case PIN_CONFIG_SLEW_RATE:
 			case PIN_CONFIG_MODE_LOW_POWER:
+			case PIN_CONFIG_INPUT_ENABLE:
 				shift = ffs(func->conf[i].mask) - 1;
 				data &= ~func->conf[i].mask;
 				data |= (arg << shift) & func->conf[i].mask;
@@ -918,6 +920,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 	static const struct pcs_conf_type prop2[] = {
 		{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
 		{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
+		{ "pinctrl-single,input-enable", PIN_CONFIG_INPUT_ENABLE, },
 		{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
 		{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
 	};
-- 
2.17.1