[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <162262084596.4130789.198191855440093780@swboyd.mtv.corp.google.com>
Date: Wed, 02 Jun 2021 01:00:45 -0700
From: Stephen Boyd <sboyd@...nel.org>
To: Luca Ceresoli <luca@...aceresoli.net>, linux-clk@...r.kernel.org
Cc: Luca Ceresoli <luca@...aceresoli.net>,
Michael Turquette <mturquette@...libre.com>,
linux-kernel@...r.kernel.org, Adam Ford <aford173@...il.com>
Subject: Re: [PATCH RESEND] clk: vc5: fix output disabling when enabling a FOD
Quoting Luca Ceresoli (2021-05-27 14:16:47)
> On 5P49V6965, when an output is enabled we enable the corresponding
> FOD. When this happens for the first time, and specifically when writing
> register VC5_OUT_DIV_CONTROL in vc5_clk_out_prepare(), all other outputs
> are stopped for a short time and then restarted.
>
> According to Renesas support this is intended: "The reason for that is VC6E
> has synced up all output function".
>
> This behaviour can be disabled at least on VersaClock 6E devices, of which
> only the 5P49V6965 is currently implemented by this driver. This requires
> writing bit 7 (bypass_sync{1..4}) in register 0x20..0x50. Those registers
> are named "Unused Factory Reserved Register", and the bits are documented
> as "Skip VDDO<N> verification", which does not clearly explain the relation
> to FOD sync. However according to Renesas support as well as my testing
> setting this bit does prevent disabling of all clock outputs when enabling
> a FOD.
>
> See "VersaClock ® 6E Family Register Descriptions and Programming Guide"
> (August 30, 2018), Table 116 "Power Up VDD check", page 58:
> https://www.renesas.com/us/en/document/mau/versaclock-6e-family-register-descriptions-and-programming-guide
>
> Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
> Reviewed-by: Adam Ford <aford173@...il.com>
>
> ---
Any Fixes tag for this patch?
Powered by blists - more mailing lists