| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53f993ce-7612-0131-7540-9c1abd0865ae@opensynergy.com>
Date: Wed, 2 Jun 2021 10:25:36 +0200
From: Peter Hilber <peter.hilber@...nsynergy.com>
To: Vincent Guittot <vincent.guittot@...aro.org>
CC: LAK <linux-arm-kernel@...ts.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
<virtualization@...ts.linux-foundation.org>,
<virtio-dev@...ts.oasis-open.org>,
Igor Skalkin <igor.skalkin@...nsynergy.com>,
Rob Herring <robh+dt@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Sudeep Holla <sudeep.holla@....com>,
Souvik Chakravarty <souvik.chakravarty@....com>,
Alex Bennée <alex.bennee@...aro.org>,
Jean-Philippe Brucker <jean-philippe@...aro.org>,
<mikhail.golubev@...nsynergy.com>,
<anton.yakovlev@...nsynergy.com>,
Vasyl Vavrychuk <Vasyl.Vavrychuk@...nsynergy.com>,
Andriy Tryshnivskyy <Andriy.Tryshnivskyy@...nsynergy.com>,
Cristian Marussi <cristian.marussi@....com>,
"Michael S. Tsirkin" <mst@...hat.com>,
Jason Wang <jasowang@...hat.com>,
Viresh Kumar <viresh.kumar@...aro.org>
Subject: Re: [RFC PATCH v3 11/12] firmware: arm_scmi: Add virtio transport
On 01.06.21 16:53, Vincent Guittot wrote:
> On Tue, 11 May 2021 at 02:28, Peter Hilber <peter.hilber@...nsynergy.com> wrote:
>>
>> From: Igor Skalkin <igor.skalkin@...nsynergy.com>
>>
>> This transport enables accessing an SCMI platform as a virtio device.
>>
>> Implement an SCMI virtio driver according to the virtio SCMI device spec
>> [1]. Virtio device id 32 has been reserved for the SCMI device [2].
>>
>> The virtio transport has one Tx channel (virtio cmdq, A2P channel) and
>> at most one Rx channel (virtio eventq, P2A channel).
>>
>> The following feature bit defined in [1] is not implemented:
>> VIRTIO_SCMI_F_SHARED_MEMORY.
>>
>> After the preparatory patches, this implements the virtio transport as
>> paraphrased:
>>
>> Only support a single arm-scmi device (which is consistent with the SCMI
>> spec). scmi-virtio init is called from arm-scmi module init. During the
>> arm-scmi probing, link to the first probed scmi-virtio device. Defer
>> arm-scmi probing if no scmi-virtio device is bound yet.
>>
>> For simplicity, restrict the number of messages which can be pending
>> simultaneously according to the virtqueue capacity. (The virtqueue sizes
>> are negotiated with the virtio device.)
>>
>> As soon as Rx channel message buffers are allocated or have been read
>> out by the arm-scmi driver, feed them to the virtio device.
>>
>> Since some virtio devices may not have the short response time exhibited
>> by SCMI platforms using other transports, set a generous response
>> timeout.
>>
>> Limitations:
>>
>> - Polling is not supported.
>>
>> - The timeout for delayed responses has not been adjusted.
>>
>> [1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
>> [2] https://www.oasis-open.org/committees/ballot.php?id=3496
>>
>> Signed-off-by: Igor Skalkin <igor.skalkin@...nsynergy.com>
>> [ Peter: Adapted patch for submission to upstream. ]
>> Co-developed-by: Peter Hilber <peter.hilber@...nsynergy.com>
>> Signed-off-by: Peter Hilber <peter.hilber@...nsynergy.com>
>> ---
>> MAINTAINERS | 1 +
>> drivers/firmware/Kconfig | 12 +
>> drivers/firmware/arm_scmi/Makefile | 1 +
>> drivers/firmware/arm_scmi/common.h | 3 +
>> drivers/firmware/arm_scmi/driver.c | 3 +
>> drivers/firmware/arm_scmi/virtio.c | 523 +++++++++++++++++++++++++++++
>> include/uapi/linux/virtio_ids.h | 1 +
>> include/uapi/linux/virtio_scmi.h | 25 ++
>> 8 files changed, 569 insertions(+)
>> create mode 100644 drivers/firmware/arm_scmi/virtio.c
>> create mode 100644 include/uapi/linux/virtio_scmi.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index bd7aff0c120f..449c336872f3 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -17705,6 +17705,7 @@ F: drivers/regulator/scmi-regulator.c
>> F: drivers/reset/reset-scmi.c
>> F: include/linux/sc[mp]i_protocol.h
>> F: include/trace/events/scmi.h
>> +F: include/uapi/linux/virtio_scmi.h
>>
>> SYSTEM RESET/SHUTDOWN DRIVERS
>> M: Sebastian Reichel <sre@...nel.org>
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index e8377b12e4d0..7e9eafdd9b63 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -39,6 +39,18 @@ config ARM_SCMI_HAVE_MSG
>> This declares whether a message passing based transport for SCMI is
>> available.
>>
>> +# This config option includes the dependencies of ARM_SCMI_PROTOCOL so that
>> +# this config doesn't show up when SCMI wouldn't be available.
>> +config VIRTIO_SCMI
>> + bool "Virtio transport for SCMI"
>> + select ARM_SCMI_HAVE_MSG
>> + depends on VIRTIO && (ARM || ARM64 || COMPILE_TEST)
>> + help
>> + This enables the virtio based transport for SCMI.
>> +
>> + If you want to use the ARM SCMI protocol between the virtio guest and
>> + a host providing a virtio SCMI device, answer Y.
>> +
>> config ARM_SCMI_POWER_DOMAIN
>> tristate "SCMI power domain driver"
>> depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
>> diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
>> index f6b4acb8abdb..db1787606fb2 100644
>> --- a/drivers/firmware/arm_scmi/Makefile
>> +++ b/drivers/firmware/arm_scmi/Makefile
>> @@ -5,6 +5,7 @@ scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
>> scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
>> scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
>> scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
>> +scmi-transport-$(CONFIG_VIRTIO_SCMI) += virtio.o
>> scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
>> scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
>> $(scmi-transport-y)
>> diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
>> index 4cb6571c7aaf..bada06cfd33d 100644
>> --- a/drivers/firmware/arm_scmi/common.h
>> +++ b/drivers/firmware/arm_scmi/common.h
>> @@ -349,6 +349,9 @@ extern const struct scmi_desc scmi_mailbox_desc;
>> #ifdef CONFIG_HAVE_ARM_SMCCC
>> extern const struct scmi_desc scmi_smc_desc;
>> #endif
>> +#ifdef CONFIG_VIRTIO_SCMI
>> +extern const struct scmi_desc scmi_virtio_desc;
>> +#endif
>>
>> int scmi_set_transport_info(struct device *dev, void *transport_info);
>> void *scmi_get_transport_info(struct device *dev);
>> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
>> index e04e7c8e6928..a31187385470 100644
>> --- a/drivers/firmware/arm_scmi/driver.c
>> +++ b/drivers/firmware/arm_scmi/driver.c
>> @@ -1637,6 +1637,9 @@ static const struct of_device_id scmi_of_match[] = {
>> #endif
>> #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
>> { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
>> +#endif
>> +#ifdef CONFIG_VIRTIO_SCMI
>> + { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
>> #endif
>> { /* Sentinel */ },
>> };
>> diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c
>> new file mode 100644
>> index 000000000000..20972adf6dc7
>> --- /dev/null
>> +++ b/drivers/firmware/arm_scmi/virtio.c
>> @@ -0,0 +1,523 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Virtio Transport driver for Arm System Control and Management Interface
>> + * (SCMI).
>> + *
>> + * Copyright (C) 2020 OpenSynergy.
>> + */
>> +
>> +/**
>> + * DOC: Theory of Operation
>> + *
>> + * The scmi-virtio transport implements a driver for the virtio SCMI device.
>> + *
>> + * There is one Tx channel (virtio cmdq, A2P channel) and at most one Rx
>> + * channel (virtio eventq, P2A channel). Each channel is implemented through a
>> + * virtqueue. Access to each virtqueue is protected by spinlocks.
>> + */
>> +
>> +#include <linux/errno.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/virtio.h>
>> +#include <linux/virtio_config.h>
>> +#include <uapi/linux/virtio_ids.h>
>> +#include <uapi/linux/virtio_scmi.h>
>> +
>> +#include "common.h"
>> +
>> +#define VIRTIO_SCMI_MAX_MSG_SIZE 128 /* Value may be increased. */
>> +#define VIRTIO_SCMI_MAX_PDU_SIZE \
>> + (VIRTIO_SCMI_MAX_MSG_SIZE + SCMI_MSG_MAX_PROT_OVERHEAD)
>> +#define DESCRIPTORS_PER_TX_MSG 2
>> +
>> +/**
>> + * struct scmi_vio_channel - Transport channel information
>> + *
>> + * @lock: Protects access to all members except ready.
>> + * @ready_lock: Protects access to ready. If required, it must be taken before
>> + * lock.
>> + * @vqueue: Associated virtqueue
>> + * @cinfo: SCMI Tx or Rx channel
>> + * @free_list: List of unused scmi_vio_msg, maintained for Tx channels only
>> + * @is_rx: Whether channel is an Rx channel
>> + * @ready: Whether transport user is ready to hear about channel
>> + */
>> +struct scmi_vio_channel {
>> + spinlock_t lock;
>> + spinlock_t ready_lock;
>> + struct virtqueue *vqueue;
>> + struct scmi_chan_info *cinfo;
>> + struct list_head free_list;
>> + u8 is_rx;
>> + u8 ready;
>> +};
>> +
>> +/**
>> + * struct scmi_vio_msg - Transport PDU information
>> + *
>> + * @request: SDU used for commands
>> + * @input: SDU used for (delayed) responses and notifications
>> + * @list: List which scmi_vio_msg may be part of
>> + * @rx_len: Input SDU size in bytes, once input has been received
>> + */
>> +struct scmi_vio_msg {
>> + struct scmi_msg_payld *request;
>> + struct scmi_msg_payld *input;
>> + struct list_head list;
>> + unsigned int rx_len;
>> +};
>> +
>> +static bool scmi_vio_have_vq_rx(struct virtio_device *vdev)
>> +{
>> + return virtio_has_feature(vdev, VIRTIO_SCMI_F_P2A_CHANNELS);
>> +}
>> +
>> +static int scmi_vio_feed_vq_rx(struct scmi_vio_channel *vioch,
>> + struct scmi_vio_msg *msg)
>> +{
>> + struct scatterlist sg_in;
>> + int rc;
>> + unsigned long flags;
>> +
>> + sg_init_one(&sg_in, msg->input, VIRTIO_SCMI_MAX_PDU_SIZE);
>> +
>> + spin_lock_irqsave(&vioch->lock, flags);
>> +
>> + rc = virtqueue_add_inbuf(vioch->vqueue, &sg_in, 1, msg, GFP_ATOMIC);
>> + if (rc)
>> + dev_err_once(vioch->cinfo->dev,
>> + "%s() failed to add to virtqueue (%d)\n", __func__,
>> + rc);
>> + else
>> + virtqueue_kick(vioch->vqueue);
>> +
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> +
>> + return rc;
>> +}
>> +
>> +static void scmi_vio_complete_cb(struct virtqueue *vqueue)
>> +{
>> + unsigned long ready_flags;
>> + unsigned long flags;
>> + unsigned int length;
>> + struct scmi_vio_channel *vioch;
>> + struct scmi_vio_msg *msg;
>> + bool cb_enabled = true;
>> +
>> + if (WARN_ON_ONCE(!vqueue->vdev->priv))
>> + return;
>> + vioch = &((struct scmi_vio_channel *)vqueue->vdev->priv)[vqueue->index];
>> +
>> + for (;;) {
>> + spin_lock_irqsave(&vioch->ready_lock, ready_flags);
>> +
>> + if (!vioch->ready) {
>> + if (!cb_enabled)
>> + (void)virtqueue_enable_cb(vqueue);
>> + goto unlock_ready_out;
>> + }
>> +
>> + spin_lock_irqsave(&vioch->lock, flags);
>> + if (cb_enabled) {
>> + virtqueue_disable_cb(vqueue);
>> + cb_enabled = false;
>> + }
>> + msg = virtqueue_get_buf(vqueue, &length);
>> + if (!msg) {
>> + if (virtqueue_enable_cb(vqueue))
>> + goto unlock_out;
>> + else
>> + cb_enabled = true;
>> + }
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> +
>> + if (msg) {
>> + msg->rx_len = length;
>> +
>> + /*
>> + * Hold the ready_lock during the callback to avoid
>> + * races when the arm-scmi driver is unbinding while
>> + * the virtio device is not quiesced yet.
>> + */
>> + scmi_rx_callback(vioch->cinfo,
>> + msg_read_header(msg->input), msg);
>> + }
>> + spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
>> + }
>> +
>> +unlock_out:
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> +unlock_ready_out:
>> + spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
>> +}
>> +
>> +static const char *const scmi_vio_vqueue_names[] = { "tx", "rx" };
>> +
>> +static vq_callback_t *scmi_vio_complete_callbacks[] = {
>> + scmi_vio_complete_cb,
>> + scmi_vio_complete_cb
>> +};
>> +
>> +static unsigned int virtio_get_max_msg(bool tx,
>> + struct scmi_chan_info *base_cinfo)
>> +{
>> + struct scmi_vio_channel *vioch = base_cinfo->transport_info;
>> + unsigned int ret;
>> +
>> + ret = virtqueue_get_vring_size(vioch->vqueue);
>> +
>> + /* Tx messages need multiple descriptors. */()
>> + if (tx)
>> + ret /= DESCRIPTORS_PER_TX_MSG;
>> +
>> + if (ret > MSG_TOKEN_MAX) {
>
> __scmi_xfer_info_init() returns error for info->max_msg >=
> MSG_TOKEN_MAX so it should be (ret >= MSG_TOKEN_MAX
>
I think it would be better to use the > comparison in
__scmi_xfer_info_init(), too. That should work in my understanding. I
think that change was originally in my branch, but I lost it somehow.
>
>> + dev_info_once(
>> + base_cinfo->dev,
>> + "Only %ld messages can be pending simultaneously, while the %s virtqueue could hold %d\n",
>> + MSG_TOKEN_MAX, tx ? "tx" : "rx", ret);
>> + ret = MSG_TOKEN_MAX;
>
> should be ret = MSG_TOKEN_MAX-1;
>
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int scmi_vio_match_any_dev(struct device *dev, const void *data)
>> +{
>> + return 1;
>> +}
>> +
>> +static struct virtio_driver virtio_scmi_driver; /* Forward declaration */
>> +
>> +static int virtio_link_supplier(struct device *dev)
>> +{
>> + struct device *vdev = driver_find_device(
>> + &virtio_scmi_driver.driver, NULL, NULL, scmi_vio_match_any_dev);
>> +
>> + if (!vdev) {
>> + dev_notice_once(
>> + dev,
>> + "Deferring probe after not finding a bound scmi-virtio device\n");
>> + return -EPROBE_DEFER;
>> + }
>> +
>> + /* Add device link for remove order and sysfs link. */
>> + if (!device_link_add(dev, vdev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
>> + put_device(vdev);
>> + dev_err(dev, "Adding link to supplier virtio device failed\n");
>> + return -ECANCELED;
>> + }
>> +
>> + put_device(vdev);
>> + return scmi_set_transport_info(dev, dev_to_virtio(vdev));
>> +}
>> +
>> +static bool virtio_chan_available(struct device *dev, int idx)
>> +{
>> + struct virtio_device *vdev;
>> +
>> + /* scmi-virtio doesn't support per-protocol channels */
>> + if (is_scmi_protocol_device(dev))
>> + return false;
>> +
>> + vdev = scmi_get_transport_info(dev);
>> + if (!vdev)
>> + return false;
>> +
>> + switch (idx) {
>> + case VIRTIO_SCMI_VQ_TX:
>> + return true;
>> + case VIRTIO_SCMI_VQ_RX:
>> + return scmi_vio_have_vq_rx(vdev);
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
>> + bool tx)
>> +{
>> + unsigned long flags;
>> + struct virtio_device *vdev;
>> + struct scmi_vio_channel *vioch;
>> + int index = tx ? VIRTIO_SCMI_VQ_TX : VIRTIO_SCMI_VQ_RX;
>> + int max_msg;
>> + int i;
>> +
>> + if (!virtio_chan_available(dev, index))
>> + return -ENODEV;
>> +
>> + vdev = scmi_get_transport_info(dev);
>> + vioch = &((struct scmi_vio_channel *)vdev->priv)[index];
>> +
>> + spin_lock_irqsave(&vioch->lock, flags);
>> + cinfo->transport_info = vioch;
>> + vioch->cinfo = cinfo;
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> +
>> + max_msg = virtio_get_max_msg(tx, cinfo);
>> +
>> + for (i = 0; i < max_msg; i++) {
>> + struct scmi_vio_msg *msg;
>> +
>> + msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL);
>> + if (!msg)
>> + return -ENOMEM;
>> +
>> + if (tx) {
>> + msg->request = devm_kzalloc(cinfo->dev,
>> + VIRTIO_SCMI_MAX_PDU_SIZE,
>> + GFP_KERNEL);
>> + if (!msg->request)
>> + return -ENOMEM;
>> + }
>> +
>> + msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
>> + GFP_KERNEL);
>> + if (!msg->input)
>> + return -ENOMEM;
>> +
>> + if (tx) {
>> + spin_lock_irqsave(&vioch->lock, flags);
>> + list_add_tail(&msg->list, &vioch->free_list);
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> + } else {
>> + scmi_vio_feed_vq_rx(vioch, msg);
>> + }
>> + }
>> +
>> + spin_lock_irqsave(&vioch->ready_lock, flags);
>> + vioch->ready = true;
>> + spin_unlock_irqrestore(&vioch->ready_lock, flags);
>> +
>> + return 0;
>> +}
>> +
>> +static int virtio_chan_free(int id, void *p, void *data)
>> +{
>> + unsigned long flags;
>> + struct scmi_chan_info *cinfo = p;
>> + struct scmi_vio_channel *vioch = cinfo->transport_info;
>> +
>> + spin_lock_irqsave(&vioch->ready_lock, flags);
>> + vioch->ready = false;
>> + spin_unlock_irqrestore(&vioch->ready_lock, flags);
>> +
>> + scmi_free_channel(cinfo, data, id);
>> + return 0;
>> +}
>> +
>> +static int virtio_send_message(struct scmi_chan_info *cinfo,
>> + struct scmi_xfer *xfer)
>> +{
>> + struct scmi_vio_channel *vioch = cinfo->transport_info;
>> + struct scatterlist sg_out;
>> + struct scatterlist sg_in;
>> + struct scatterlist *sgs[DESCRIPTORS_PER_TX_MSG] = { &sg_out, &sg_in };
>> + unsigned long flags;
>> + int rc;
>> + struct scmi_vio_msg *msg;
>> +
>> + /*
>> + * TODO: For now, we don't support polling. But it should not be
>> + * difficult to add support.
>> + */
>> + if (xfer->hdr.poll_completion)
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&vioch->lock, flags);
>> +
>> + if (list_empty(&vioch->free_list)) {
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> + return -EBUSY;
>> + }
>> +
>> + msg = list_first_entry(&vioch->free_list, typeof(*msg), list);
>> + list_del(&msg->list);
>> +
>> + msg_tx_prepare(msg->request, xfer);
>> +
>> + sg_init_one(&sg_out, msg->request, msg_command_size(xfer));
>> + sg_init_one(&sg_in, msg->input, msg_response_size(xfer));
>> +
>> + rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, msg, GFP_ATOMIC);
>> + if (rc) {
>> + list_add(&msg->list, &vioch->free_list);
>> + dev_err_once(vioch->cinfo->dev,
>> + "%s() failed to add to virtqueue (%d)\n", __func__,
>> + rc);
>> + } else {
>> + virtqueue_kick(vioch->vqueue);
>> + }
>> +
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> +
>> + return rc;
>> +}
>> +
>> +static void virtio_fetch_response(struct scmi_chan_info *cinfo,
>> + struct scmi_xfer *xfer, void *msg_handle)
>> +{
>> + struct scmi_vio_msg *msg = msg_handle;
>> + struct scmi_vio_channel *vioch = cinfo->transport_info;
>> +
>> + if (!msg) {
>> + dev_dbg_once(&vioch->vqueue->vdev->dev,
>> + "Ignoring %s() call with NULL msg_handle\n",
>> + __func__);
>> + return;
>> + }
>> +
>> + msg_fetch_response(msg->input, msg->rx_len, xfer);
>> +}
>> +
>> +static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
>> + size_t max_len, struct scmi_xfer *xfer,
>> + void *msg_handle)
>> +{
>> + struct scmi_vio_msg *msg = msg_handle;
>> + struct scmi_vio_channel *vioch = cinfo->transport_info;
>> +
>> + if (!msg) {
>> + dev_dbg_once(&vioch->vqueue->vdev->dev,
>> + "Ignoring %s() call with NULL msg_handle\n",
>> + __func__);
>> + return;
>> + }
>> +
>> + msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer);
>> +}
>> +
>> +static void dummy_clear_channel(struct scmi_chan_info *cinfo)
>> +{
>> +}
>> +
>> +static bool dummy_poll_done(struct scmi_chan_info *cinfo,
>> + struct scmi_xfer *xfer)
>> +{
>> + return false;
>> +}
>> +
>> +static void virtio_drop_message(struct scmi_chan_info *cinfo, void *msg_handle)
>> +{
>> + unsigned long flags;
>> + struct scmi_vio_channel *vioch = cinfo->transport_info;
>> + struct scmi_vio_msg *msg = msg_handle;
>> +
>> + if (!msg) {
>> + dev_dbg_once(&vioch->vqueue->vdev->dev,
>> + "Ignoring %s() call with NULL msg_handle\n",
>> + __func__);
>> + return;
>> + }
>> +
>> + if (vioch->is_rx) {
>> + scmi_vio_feed_vq_rx(vioch, msg);
>> + } else {
>> + spin_lock_irqsave(&vioch->lock, flags);
>> + list_add(&msg->list, &vioch->free_list);
>> + spin_unlock_irqrestore(&vioch->lock, flags);
>> + }
>> +}
>> +
>> +static const struct scmi_transport_ops scmi_virtio_ops = {
>> + .link_supplier = virtio_link_supplier,
>> + .chan_available = virtio_chan_available,
>> + .chan_setup = virtio_chan_setup,
>> + .chan_free = virtio_chan_free,
>> + .get_max_msg = virtio_get_max_msg,
>> + .send_message = virtio_send_message,
>> + .fetch_response = virtio_fetch_response,
>> + .fetch_notification = virtio_fetch_notification,
>> + .clear_channel = dummy_clear_channel,
>> + .poll_done = dummy_poll_done,
>> + .drop_message = virtio_drop_message,
>> +};
>> +
>> +static int scmi_vio_probe(struct virtio_device *vdev)
>> +{
>> + struct device *dev = &vdev->dev;
>> + struct scmi_vio_channel *channels;
>> + bool have_vq_rx;
>> + int vq_cnt;
>> + int i;
>> + int ret;
>> + struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT];
>> +
>> + have_vq_rx = scmi_vio_have_vq_rx(vdev);
>> + vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1;
>> +
>> + channels = devm_kcalloc(dev, vq_cnt, sizeof(*channels), GFP_KERNEL);
>> + if (!channels)
>> + return -ENOMEM;
>> +
>> + if (have_vq_rx)
>> + channels[VIRTIO_SCMI_VQ_RX].is_rx = true;
>> +
>> + ret = virtio_find_vqs(vdev, vq_cnt, vqs, scmi_vio_complete_callbacks,
>> + scmi_vio_vqueue_names, NULL);
>> + if (ret) {
>> + dev_err(dev, "Failed to get %d virtqueue(s)\n", vq_cnt);
>> + return ret;
>> + }
>> + dev_info(dev, "Found %d virtqueue(s)\n", vq_cnt);
>> +
>> + for (i = 0; i < vq_cnt; i++) {
>> + spin_lock_init(&channels[i].lock);
>> + spin_lock_init(&channels[i].ready_lock);
>> + INIT_LIST_HEAD(&channels[i].free_list);
>> + channels[i].vqueue = vqs[i];
>> + }
>> +
>> + vdev->priv = channels;
>> +
>> + return 0;
>> +}
>> +
>> +static void scmi_vio_remove(struct virtio_device *vdev)
>> +{
>> + vdev->config->reset(vdev);
>> + vdev->config->del_vqs(vdev);
>> +}
>> +
>> +static unsigned int features[] = {
>> + VIRTIO_SCMI_F_P2A_CHANNELS,
>> +};
>> +
>> +static const struct virtio_device_id id_table[] = {
>> + { VIRTIO_ID_SCMI, VIRTIO_DEV_ANY_ID },
>> + { 0 }
>> +};
>> +
>> +static struct virtio_driver virtio_scmi_driver = {
>> + .driver.name = "scmi-virtio",
>> + .driver.owner = THIS_MODULE,
>> + .feature_table = features,
>> + .feature_table_size = ARRAY_SIZE(features),
>> + .id_table = id_table,
>> + .probe = scmi_vio_probe,
>> + .remove = scmi_vio_remove,
>> +};
>> +
>> +static int __init virtio_scmi_init(void)
>> +{
>> + return register_virtio_driver(&virtio_scmi_driver);
>> +}
>> +
>> +static void __exit virtio_scmi_exit(void)
>> +{
>> + unregister_virtio_driver(&virtio_scmi_driver);
>> +}
>> +
>> +const struct scmi_desc scmi_virtio_desc = {
>> + .init = virtio_scmi_init,
>> + .exit = virtio_scmi_exit,
>> + .ops = &scmi_virtio_ops,
>> + .max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */
>> + .max_msg = 0, /* overridden by virtio_get_max_msg() */
>> + .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
>> +};
>> diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
>> index f0c35ce8628c..c146fe30e589 100644
>> --- a/include/uapi/linux/virtio_ids.h
>> +++ b/include/uapi/linux/virtio_ids.h
>> @@ -56,5 +56,6 @@
>> #define VIRTIO_ID_PMEM 27 /* virtio pmem */
>> #define VIRTIO_ID_BT 28 /* virtio bluetooth */
>> #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
>> +#define VIRTIO_ID_SCMI 32 /* virtio SCMI */
>>
>> #endif /* _LINUX_VIRTIO_IDS_H */
>> diff --git a/include/uapi/linux/virtio_scmi.h b/include/uapi/linux/virtio_scmi.h
>> new file mode 100644
>> index 000000000000..732b01504c35
>> --- /dev/null
>> +++ b/include/uapi/linux/virtio_scmi.h
>> @@ -0,0 +1,25 @@
>> +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
>> +/*
>> + * Copyright (C) 2020 OpenSynergy GmbH
>> + */
>> +
>> +#ifndef _UAPI_LINUX_VIRTIO_SCMI_H
>> +#define _UAPI_LINUX_VIRTIO_SCMI_H
>> +
>> +#include <linux/virtio_types.h>
>> +
>> +/* Feature bits */
>> +
>> +/* Device implements some SCMI notifications, or delayed responses. */
>> +#define VIRTIO_SCMI_F_P2A_CHANNELS 0
>> +
>> +/* Device implements any SCMI statistics shared memory region */
>> +#define VIRTIO_SCMI_F_SHARED_MEMORY 1
>> +
>> +/* Virtqueues */
>> +
>> +#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
>> +#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
>> +#define VIRTIO_SCMI_VQ_MAX_CNT 2
>> +
>> +#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */
>> --
>> 2.25.1
>>
>>
>
Powered by blists - more mailing lists