| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210602021833.2186419-2-sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Tue, 1 Jun 2021 19:18:25 -0700
From: Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
Peter Zijlstra <peterz@...radead.org>,
Andy Lutomirski <luto@...nel.org>
Cc: Peter H Anvin <hpa@...or.com>, Dave Hansen <dave.hansen@...el.com>,
Tony Luck <tony.luck@...el.com>,
Dan Williams <dan.j.williams@...el.com>,
Andi Kleen <ak@...ux.intel.com>,
Kirill Shutemov <kirill.shutemov@...ux.intel.com>,
Kuppuswamy Sathyanarayanan <knsathya@...nel.org>,
Sean Christopherson <seanjc@...gle.com>,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>,
linux-kernel@...r.kernel.org, x86@...nel.org
Subject: [PATCH v1 01/11] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
COFNIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
Reviewed-by: Andi Kleen <ak@...ux.intel.com>
Reviewed-by: Tony Luck <tony.luck@...el.com>
---
arch/x86/include/asm/irqflags.h | 40 +++++++++++++++------------
arch/x86/include/asm/paravirt.h | 20 +++++++-------
arch/x86/include/asm/paravirt_types.h | 3 +-
arch/x86/kernel/paravirt.c | 4 ++-
4 files changed, 36 insertions(+), 31 deletions(-)
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index c5ce9845c999..f3bb33b1715d 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -59,6 +59,28 @@ static inline __cpuidle void native_halt(void)
#endif
+#ifndef CONFIG_PARAVIRT
+#ifndef __ASSEMBLY__
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline __cpuidle void arch_safe_halt(void)
+{
+ native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline __cpuidle void halt(void)
+{
+ native_halt();
+}
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
#ifdef CONFIG_PARAVIRT_XXL
#include <asm/paravirt.h>
#else
@@ -80,24 +102,6 @@ static __always_inline void arch_local_irq_enable(void)
native_irq_enable();
}
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline __cpuidle void arch_safe_halt(void)
-{
- native_safe_halt();
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline __cpuidle void halt(void)
-{
- native_halt();
-}
-
/*
* For spinlocks, etc:
*/
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index da3a1ac82be5..d323a626c7a8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -97,6 +97,16 @@ static inline void paravirt_arch_exit_mmap(struct mm_struct *mm)
PVOP_VCALL1(mmu.exit_mmap, mm);
}
+static inline void arch_safe_halt(void)
+{
+ PVOP_VCALL0(irq.safe_halt);
+}
+
+static inline void halt(void)
+{
+ PVOP_VCALL0(irq.halt);
+}
+
#ifdef CONFIG_PARAVIRT_XXL
static inline void load_sp0(unsigned long sp0)
{
@@ -162,16 +172,6 @@ static inline void __write_cr4(unsigned long x)
PVOP_VCALL1(cpu.write_cr4, x);
}
-static inline void arch_safe_halt(void)
-{
- PVOP_VCALL0(irq.safe_halt);
-}
-
-static inline void halt(void)
-{
- PVOP_VCALL0(irq.halt);
-}
-
static inline void wbinvd(void)
{
PVOP_ALT_VCALL0(cpu.wbinvd, "wbinvd", ALT_NOT(X86_FEATURE_XENPV));
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index d9d6b0203ec4..40082847f314 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -150,10 +150,9 @@ struct pv_irq_ops {
struct paravirt_callee_save save_fl;
struct paravirt_callee_save irq_disable;
struct paravirt_callee_save irq_enable;
-
+#endif
void (*safe_halt)(void);
void (*halt)(void);
-#endif
} __no_randomize_layout;
struct pv_mmu_ops {
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 04cafc057bed..124e0f6c5d1c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -283,9 +283,11 @@ struct paravirt_patch_template pv_ops = {
.irq.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl),
.irq.irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable),
.irq.irq_enable = __PV_IS_CALLEE_SAVE(native_irq_enable),
+#endif /* CONFIG_PARAVIRT_XXL */
+
+ /* Irq HLT ops. */
.irq.safe_halt = native_safe_halt,
.irq.halt = native_halt,
-#endif /* CONFIG_PARAVIRT_XXL */
/* Mmu ops. */
.mmu.flush_tlb_user = native_flush_tlb_local,
--
2.25.1
Powered by blists - more mailing lists