linux-kernel - Re: [PATCH] Input: elan_i2c: Disable irq on shutdown

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 2 Jun 2021 18:18:17 -0700
From:   Dmitry Torokhov <dmitry.torokhov@...il.com>
To:     Stephen Boyd <swboyd@...omium.org>
Cc:     linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
        Jingle Wu <jingle.wu@....com.tw>, Wolfram Sang <wsa@...nel.org>
Subject: Re: [PATCH] Input: elan_i2c: Disable irq on shutdown

Hi Stephen,

Sorry for the long delay with the response.

On Mon, May 10, 2021 at 10:11:21PM -0700, Stephen Boyd wrote:
> Quoting Dmitry Torokhov (2021-05-10 19:01:58)
> > Hi Stephen,
> >
> > On Mon, May 10, 2021 at 03:00:12PM -0700, Stephen Boyd wrote:
> > > Touching an elan trackpad while shutting down the system sometimes leads
> > > to the following warning from i2c core. This is because the irq is still
> > > active and working, but the i2c bus for the device has been shutdown
> > > already. If the bus has been taken down then we shouldn't expect
> > > transfers to work. Disable the irq on shutdown so that this driver
> > > doesn't try to get the report in the irq handler after the i2c bus is
> > > shutdown.
> > >
> > >  i2c i2c-7: Transfer while suspended
> > >  WARNING: CPU: 0 PID: 196 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0xb8/0x38c
> > >  Modules linked in: rfcomm algif_hash algif_skcipher af_alg uinput xt_cgroup
> > >  CPU: 0 PID: 196 Comm: irq/166-ekth300 Not tainted 5.4.115 #96
> > >  Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
> > >  pstate: 60c00009 (nZCv daif +PAN +UAO)
> > >  pc : __i2c_transfer+0xb8/0x38c
> > >  lr : __i2c_transfer+0xb8/0x38c
> > >  sp : ffffffc011793c20
> > >  x29: ffffffc011793c20 x28: 0000000000000000
> > >  x27: ffffff85efd60348 x26: ffffff85efdb8040
> > >  x25: ffffffec39d579cc x24: ffffffec39d57bac
> > >  x23: ffffffec3aab17b9 x22: ffffff85f02d6400
> > >  x21: 0000000000000001 x20: ffffff85f02aa190
> > >  x19: ffffff85f02aa100 x18: 00000000ffff0a10
> > >  x17: 0000000000000044 x16: 00000000000000ec
> > >  x15: ffffffec3a0b9174 x14: 0000000000000006
> > >  x13: 00000000003fe680 x12: 0000000000000000
> > >  x11: 0000000000000000 x10: 00000000ffffffff
> > >  x9 : 806da3cb9f8c1d00 x8 : 806da3cb9f8c1d00
> > >  x7 : 0000000000000000 x6 : ffffffec3afd3bef
> > >  x5 : 0000000000000000 x4 : 0000000000000000
> > >  x3 : 0000000000000000 x2 : fffffffffffffcc7
> > >  x1 : 0000000000000000 x0 : 0000000000000023
> > >  Call trace:
> > >   __i2c_transfer+0xb8/0x38c
> > >   i2c_transfer+0xa0/0xf4
> > >   i2c_transfer_buffer_flags+0x64/0x98
> > >   elan_i2c_get_report+0x2c/0x88
> > >   elan_isr+0x68/0x3e4
> > >   irq_thread_fn+0x2c/0x70
> > >   irq_thread+0xf8/0x148
> > >   kthread+0x140/0x17c
> > >   ret_from_fork+0x10/0x18
> >
> > This does not seem to me that it is Elan-specific issue. I wonder if
> > this should be pushed into I2C core to shut off client->irq in shutdown
> > for everyone.
> 
> It sounds nice if we don't have to play whack-a-mole, except for the
> part where the irq is requested in this driver via
> devm_request_threaded_irq(). The i2c bus code doesn't request the irq,
> so it doesn't enable it, hence the responsibility of enabling and
> disabling the irq is on the driver.

There is purity, and there is practicality. Drivers normally prepare
device for suspend and waking up from suspend, however I2C core does
handle enabling interrupt as wakeup source because this saves on
boilerplate. I2C core already does a lot of preparing for interrupt
being requested by drivers (parsing ACPI and DT tables, etc).

> Maybe another option would be to
> disable all device irqs, similar to how that is done during suspend, but
> then we would need a split shutdown flow where there's irq enabled
> shutdown and irq disabled shutdown callbacks.

Yes, that would be quite large patch, and probably not needed for
devices/buses that do not use out of bound signalling of attention.

> That would be a large
> change. Similarly, disabling it in the i2c bus code would be a large
> change that would mean auditing each i2c driver shutdown function to
> make sure we don't disable the irq more than the number of times it has
> been enabled.

I do not think keeping counter balanced would be important here, as we
are shutting down, and upon reboot everything will be reinitialized from
scratch. Also, we are lucky in that there is just a handful of I2C
drivers defining shutdown() methods.

> Please don't make me shave this yak.

I'm afraid someone has to... I'm adding Wolfram to CC to get his take on
this.

Thanks.

-- 
Dmitry