| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75VcjwkachsTJMHPN+nAOdtbNtMV0pgWh8FTzWqMtspdoCA@mail.gmail.com>
Date: Thu, 3 Jun 2021 13:18:26 +0300
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Sander Vanheule <sander@...nheule.net>
Cc: Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Michael Walle <michael@...le.cc>,
Linux LED Subsystem <linux-leds@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Hans de Goede <hdegoede@...hat.com>,
Andrew Lunn <andrew@...n.ch>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
On Thu, Jun 3, 2021 at 1:01 PM Sander Vanheule <sander@...nheule.net> wrote:
>
> This driver implements the GPIO and pin muxing features provided by the
> RTL8231. The device should be instantiated as an MFD child, where the
> parent device has already configured the regmap used for register
> access.
>
> Debouncing is only available for the six highest GPIOs, and must be
> emulated when other pins are used for (button) inputs. Although
> described in the bindings, drive strength selection is currently not
> implemented.
Now it looks so nice that I have a temptation to give 2+ tags, but
let's do with one in accordance with process:
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
Thanks for doing this! It's a good example of how we can do it in
other cases with regmap and this kind of hardware limitation / design.
> Signed-off-by: Sander Vanheule <sander@...nheule.net>
>
> ---
> v4:
> - Switch to pinmux_generic for pin functions
> - Add pin debounce pinconf
> - Virtual addresses and cacheing
> - Use PRT_ERR_OR_ZERO in pinctrl/gpio probe
> - Drop direction-first quirk for gpio-regmap
>
> v3:
> - Use static pin description for pin controller
> - Fix gpio consumer resource leak
>
> v2:
> - Use gpio-regmap with direction-before-value output
> ---
> drivers/pinctrl/Kconfig | 11 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-rtl8231.c | 438 ++++++++++++++++++++++++++++++
> 3 files changed, 450 insertions(+)
> create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index c2c7e7963ed0..a02c1befbee4 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -221,6 +221,17 @@ config PINCTRL_ROCKCHIP
> help
> This support pinctrl and gpio driver for Rockchip SoCs.
>
> +config PINCTRL_RTL8231
> + tristate "Realtek RTL8231 GPIO expander's pin controller"
> + depends on MFD_RTL8231
> + default MFD_RTL8231
> + select GPIO_REGMAP
> + select GENERIC_PINCONF
> + select GENERIC_PINMUX_FUNCTIONS
> + help
> + Support for RTL8231 expander's GPIOs and pin controller.
> + When built as a module, the module will be called pinctrl-rtl8231.
> +
> config PINCTRL_SINGLE
> tristate "One-register-per-pin type device tree based pinctrl driver"
> depends on OF
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index 5ef5334a797f..239603efb317 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
> obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
> obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
> obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
> +obj-$(CONFIG_PINCTRL_RTL8231) += pinctrl-rtl8231.o
> obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
> obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> diff --git a/drivers/pinctrl/pinctrl-rtl8231.c b/drivers/pinctrl/pinctrl-rtl8231.c
> new file mode 100644
> index 000000000000..a0f37633b744
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-rtl8231.c
> @@ -0,0 +1,438 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitfield.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/gpio/regmap.h>
> +#include <linux/module.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include "core.h"
> +#include "pinmux.h"
> +#include <linux/mfd/rtl8231.h>
> +
> +#define RTL8231_NUM_GPIOS 37
> +#define RTL8231_DEBOUNCE_USEC 100000
> +#define RTL8231_DEBOUNCE_MIN_OFFSET 31
> +
> +struct rtl8231_pin_ctrl {
> + struct pinctrl_desc pctl_desc;
> + struct regmap *map;
> +};
> +
> +/*
> + * Pin controller functionality
> + */
> +static const char * const rtl8231_pin_function_names[] = {
> + "gpio",
> + "led",
> + "pwm",
> +};
> +
> +enum rtl8231_pin_function {
> + RTL8231_PIN_FUNCTION_GPIO = BIT(0),
> + RTL8231_PIN_FUNCTION_LED = BIT(1),
> + RTL8231_PIN_FUNCTION_PWM = BIT(2),
> +};
> +
> +struct rtl8231_pin_desc {
> + const enum rtl8231_pin_function functions;
> + const u8 reg;
> + const u8 offset;
> + const u8 gpio_function_value;
> +};
> +
> +#define RTL8231_PIN_DESC(_num, _func, _reg, _fld, _val) \
> + [_num] = { \
> + .functions = RTL8231_PIN_FUNCTION_GPIO | _func, \
> + .reg = _reg, \
> + .offset = _fld, \
> + .gpio_function_value = _val, \
> + }
> +#define RTL8231_GPIO_PIN_DESC(_num, _reg, _fld) \
> + RTL8231_PIN_DESC(_num, 0, _reg, _fld, RTL8231_PIN_MODE_GPIO)
> +#define RTL8231_LED_PIN_DESC(_num, _reg, _fld) \
> + RTL8231_PIN_DESC(_num, RTL8231_PIN_FUNCTION_LED, _reg, _fld, RTL8231_PIN_MODE_GPIO)
> +#define RTL8231_PWM_PIN_DESC(_num, _reg, _fld) \
> + RTL8231_PIN_DESC(_num, RTL8231_PIN_FUNCTION_PWM, _reg, _fld, 0)
> +
> +/*
> + * All pins have a GPIO/LED mux bit, but the bits for pins 35/36 are read-only. Use this bit
> + * for the GPIO-only pin instead of a placeholder, so the rest of the logic can stay generic.
> + */
> +static struct rtl8231_pin_desc rtl8231_pin_data[RTL8231_NUM_GPIOS] = {
> + RTL8231_LED_PIN_DESC(0, RTL8231_REG_PIN_MODE0, 0),
> + RTL8231_LED_PIN_DESC(1, RTL8231_REG_PIN_MODE0, 1),
> + RTL8231_LED_PIN_DESC(2, RTL8231_REG_PIN_MODE0, 2),
> + RTL8231_LED_PIN_DESC(3, RTL8231_REG_PIN_MODE0, 3),
> + RTL8231_LED_PIN_DESC(4, RTL8231_REG_PIN_MODE0, 4),
> + RTL8231_LED_PIN_DESC(5, RTL8231_REG_PIN_MODE0, 5),
> + RTL8231_LED_PIN_DESC(6, RTL8231_REG_PIN_MODE0, 6),
> + RTL8231_LED_PIN_DESC(7, RTL8231_REG_PIN_MODE0, 7),
> + RTL8231_LED_PIN_DESC(8, RTL8231_REG_PIN_MODE0, 8),
> + RTL8231_LED_PIN_DESC(9, RTL8231_REG_PIN_MODE0, 9),
> + RTL8231_LED_PIN_DESC(10, RTL8231_REG_PIN_MODE0, 10),
> + RTL8231_LED_PIN_DESC(11, RTL8231_REG_PIN_MODE0, 11),
> + RTL8231_LED_PIN_DESC(12, RTL8231_REG_PIN_MODE0, 12),
> + RTL8231_LED_PIN_DESC(13, RTL8231_REG_PIN_MODE0, 13),
> + RTL8231_LED_PIN_DESC(14, RTL8231_REG_PIN_MODE0, 14),
> + RTL8231_LED_PIN_DESC(15, RTL8231_REG_PIN_MODE0, 15),
> + RTL8231_LED_PIN_DESC(16, RTL8231_REG_PIN_MODE1, 0),
> + RTL8231_LED_PIN_DESC(17, RTL8231_REG_PIN_MODE1, 1),
> + RTL8231_LED_PIN_DESC(18, RTL8231_REG_PIN_MODE1, 2),
> + RTL8231_LED_PIN_DESC(19, RTL8231_REG_PIN_MODE1, 3),
> + RTL8231_LED_PIN_DESC(20, RTL8231_REG_PIN_MODE1, 4),
> + RTL8231_LED_PIN_DESC(21, RTL8231_REG_PIN_MODE1, 5),
> + RTL8231_LED_PIN_DESC(22, RTL8231_REG_PIN_MODE1, 6),
> + RTL8231_LED_PIN_DESC(23, RTL8231_REG_PIN_MODE1, 7),
> + RTL8231_LED_PIN_DESC(24, RTL8231_REG_PIN_MODE1, 8),
> + RTL8231_LED_PIN_DESC(25, RTL8231_REG_PIN_MODE1, 9),
> + RTL8231_LED_PIN_DESC(26, RTL8231_REG_PIN_MODE1, 10),
> + RTL8231_LED_PIN_DESC(27, RTL8231_REG_PIN_MODE1, 11),
> + RTL8231_LED_PIN_DESC(28, RTL8231_REG_PIN_MODE1, 12),
> + RTL8231_LED_PIN_DESC(29, RTL8231_REG_PIN_MODE1, 13),
> + RTL8231_LED_PIN_DESC(30, RTL8231_REG_PIN_MODE1, 14),
> + RTL8231_LED_PIN_DESC(31, RTL8231_REG_PIN_MODE1, 15),
> + RTL8231_LED_PIN_DESC(32, RTL8231_REG_PIN_HI_CFG, 0),
> + RTL8231_LED_PIN_DESC(33, RTL8231_REG_PIN_HI_CFG, 1),
> + RTL8231_LED_PIN_DESC(34, RTL8231_REG_PIN_HI_CFG, 2),
> + RTL8231_PWM_PIN_DESC(35, RTL8231_REG_FUNC1, 3),
> + RTL8231_GPIO_PIN_DESC(36, RTL8231_REG_PIN_HI_CFG, 4),
> +};
> +
> +#define RTL8231_PIN(_num) \
> + { \
> + .number = _num, \
> + .name = "gpio" #_num, \
> + .drv_data = &rtl8231_pin_data[_num] \
> + }
> +
> +static const struct pinctrl_pin_desc rtl8231_pins[RTL8231_NUM_GPIOS] = {
> + RTL8231_PIN(0),
> + RTL8231_PIN(1),
> + RTL8231_PIN(2),
> + RTL8231_PIN(3),
> + RTL8231_PIN(4),
> + RTL8231_PIN(5),
> + RTL8231_PIN(6),
> + RTL8231_PIN(7),
> + RTL8231_PIN(8),
> + RTL8231_PIN(9),
> + RTL8231_PIN(10),
> + RTL8231_PIN(11),
> + RTL8231_PIN(12),
> + RTL8231_PIN(13),
> + RTL8231_PIN(14),
> + RTL8231_PIN(15),
> + RTL8231_PIN(16),
> + RTL8231_PIN(17),
> + RTL8231_PIN(18),
> + RTL8231_PIN(19),
> + RTL8231_PIN(20),
> + RTL8231_PIN(21),
> + RTL8231_PIN(22),
> + RTL8231_PIN(23),
> + RTL8231_PIN(24),
> + RTL8231_PIN(25),
> + RTL8231_PIN(26),
> + RTL8231_PIN(27),
> + RTL8231_PIN(28),
> + RTL8231_PIN(29),
> + RTL8231_PIN(30),
> + RTL8231_PIN(31),
> + RTL8231_PIN(32),
> + RTL8231_PIN(33),
> + RTL8231_PIN(34),
> + RTL8231_PIN(35),
> + RTL8231_PIN(36),
> +};
> +
> +static int rtl8231_get_groups_count(struct pinctrl_dev *pctldev)
> +{
> + return ARRAY_SIZE(rtl8231_pins);
> +}
> +
> +static const char *rtl8231_get_group_name(struct pinctrl_dev *pctldev, unsigned int selector)
> +{
> + return rtl8231_pins[selector].name;
> +}
> +
> +static int rtl8231_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
> + const unsigned int **pins, unsigned int *num_pins)
> +{
> + if (selector >= ARRAY_SIZE(rtl8231_pins))
> + return -EINVAL;
> +
> + *pins = &rtl8231_pins[selector].number;
> + *num_pins = 1;
> +
> + return 0;
> +}
> +
> +static const struct pinctrl_ops rtl8231_pinctrl_ops = {
> + .get_groups_count = rtl8231_get_groups_count,
> + .get_group_name = rtl8231_get_group_name,
> + .get_group_pins = rtl8231_get_group_pins,
> + .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
> + .dt_free_map = pinconf_generic_dt_free_map,
> +};
> +
> +static int rtl8231_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
> + unsigned int group_selector)
> +{
> + const struct function_desc *func = pinmux_generic_get_function(pctldev, func_selector);
> + const struct rtl8231_pin_desc *desc = rtl8231_pins[group_selector].drv_data;
> + const struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
> + unsigned int func_flag = (unsigned int) func->data;
> + unsigned int function_mask;
> + unsigned int gpio_function;
> +
> + if (!(desc->functions & func_flag))
> + return -EINVAL;
> +
> + function_mask = BIT(desc->offset);
> + gpio_function = desc->gpio_function_value << desc->offset;
> +
> + if (func_flag == RTL8231_PIN_FUNCTION_GPIO)
> + return regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
> + else
> + return regmap_update_bits(ctrl->map, desc->reg, function_mask, ~gpio_function);
> +}
> +
> +static int rtl8231_gpio_request_enable(struct pinctrl_dev *pctldev,
> + struct pinctrl_gpio_range *range, unsigned int offset)
> +{
> + const struct rtl8231_pin_desc *desc = rtl8231_pins[offset].drv_data;
> + struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
> + unsigned int function_mask;
> + unsigned int gpio_function;
> +
> + function_mask = BIT(desc->offset);
> + gpio_function = desc->gpio_function_value << desc->offset;
> +
> + return regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
> +}
> +
> +static const struct pinmux_ops rtl8231_pinmux_ops = {
> + .get_functions_count = pinmux_generic_get_function_count,
> + .get_function_name = pinmux_generic_get_function_name,
> + .get_function_groups = pinmux_generic_get_function_groups,
> + .set_mux = rtl8231_set_mux,
> + .gpio_request_enable = rtl8231_gpio_request_enable,
> + .strict = true,
> +};
> +
> +static int rtl8231_pin_config_get(struct pinctrl_dev *pctldev, unsigned int offset,
> + unsigned long *config)
> +{
> + struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
> + unsigned int param = pinconf_to_config_param(*config);
> + unsigned int arg;
> + int err;
> + int v;
> +
> + switch (param) {
> + case PIN_CONFIG_INPUT_DEBOUNCE:
> + if (offset < RTL8231_DEBOUNCE_MIN_OFFSET)
> + return -EINVAL;
> +
> + err = regmap_read(ctrl->map, RTL8231_REG_FUNC1, &v);
> + if (err)
> + return err;
> +
> + v = FIELD_GET(RTL8231_FUNC1_DEBOUNCE_MASK, v);
> + if (v & BIT(offset - RTL8231_DEBOUNCE_MIN_OFFSET))
> + arg = RTL8231_DEBOUNCE_USEC;
> + else
> + arg = 0;
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> +
> + *config = pinconf_to_config_packed(param, arg);
> +
> + return 0;
> +}
> +
> +static int rtl8231_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
> + unsigned long *configs, unsigned int num_configs)
> +{
> + struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
> + unsigned int param, arg;
> + unsigned int pin_mask;
> + int err;
> + int i;
> +
> + for (i = 0; i < num_configs; i++) {
> + param = pinconf_to_config_param(configs[i]);
> + arg = pinconf_to_config_argument(configs[i]);
> +
> + switch (param) {
> + case PIN_CONFIG_INPUT_DEBOUNCE:
> + if (offset < RTL8231_DEBOUNCE_MIN_OFFSET)
> + return -EINVAL;
> +
> + pin_mask = FIELD_PREP(RTL8231_FUNC1_DEBOUNCE_MASK,
> + BIT(offset - RTL8231_DEBOUNCE_MIN_OFFSET));
> +
> + switch (arg) {
> + case 0:
> + err = regmap_update_bits(ctrl->map, RTL8231_REG_FUNC1,
> + pin_mask, 0);
> + break;
> + case RTL8231_DEBOUNCE_USEC:
> + err = regmap_update_bits(ctrl->map, RTL8231_REG_FUNC1,
> + pin_mask, pin_mask);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> + }
> +
> + return err;
> +}
> +
> +static const struct pinconf_ops rtl8231_pinconf_ops = {
> + .is_generic = true,
> + .pin_config_get = rtl8231_pin_config_get,
> + .pin_config_set = rtl8231_pin_config_set,
> +};
> +
> +static int rtl8231_pinctrl_init_functions(struct pinctrl_dev *pctl, struct rtl8231_pin_ctrl *ctrl)
> +{
> + const char *function_name;
> + const char **groups;
> + unsigned int f_idx;
> + unsigned int pin;
> + int num_groups;
> + int err;
> +
> + for (f_idx = 0; f_idx < ARRAY_SIZE(rtl8231_pin_function_names); f_idx++) {
> + function_name = rtl8231_pin_function_names[f_idx];
> +
> + for (pin = 0, num_groups = 0; pin < ctrl->pctl_desc.npins; pin++)
> + if (rtl8231_pin_data[pin].functions & BIT(f_idx))
> + num_groups++;
> +
> + groups = devm_kcalloc(pctl->dev, num_groups, sizeof(*groups), GFP_KERNEL);
> + if (!groups)
> + return -ENOMEM;
> +
> + for (pin = 0, num_groups = 0; pin < ctrl->pctl_desc.npins; pin++)
> + if (rtl8231_pin_data[pin].functions & BIT(f_idx))
> + groups[num_groups++] = rtl8231_pins[pin].name;
> +
> + err = pinmux_generic_add_function(pctl, function_name, groups, num_groups,
> + (void *) BIT(f_idx));
> + if (err < 0)
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int rtl8231_pinctrl_init(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
> +{
> + struct pinctrl_dev *pctldev;
> + int err;
> +
> + ctrl->pctl_desc.name = "rtl8231-pinctrl";
> + ctrl->pctl_desc.owner = THIS_MODULE;
> + ctrl->pctl_desc.confops = &rtl8231_pinconf_ops;
> + ctrl->pctl_desc.pctlops = &rtl8231_pinctrl_ops;
> + ctrl->pctl_desc.pmxops = &rtl8231_pinmux_ops;
> + ctrl->pctl_desc.npins = ARRAY_SIZE(rtl8231_pins);
> + ctrl->pctl_desc.pins = rtl8231_pins;
> +
> + err = devm_pinctrl_register_and_init(dev->parent, &ctrl->pctl_desc, ctrl, &pctldev);
> + if (err) {
> + dev_err(dev, "failed to register pin controller\n");
> + return err;
> + }
> +
> + err = rtl8231_pinctrl_init_functions(pctldev, ctrl);
> + if (err)
> + return err;
> +
> + err = pinctrl_enable(pctldev);
> + if (err)
> + dev_err(dev, "failed to enable pin controller\n");
> +
> + return err;
> +}
> +
> +/*
> + * GPIO controller functionality
> + */
> +static int rtl8231_gpio_reg_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
> + unsigned int offset, unsigned int *reg, unsigned int *mask)
> +{
> + unsigned int pin_mask = BIT(offset % RTL8231_BITS_VAL);
> +
> + if (base == RTL8231_REG_GPIO_DATA_IN0 || base == RTL8231_VREG_GPIO_DATA_OUT0
> + || offset < 32) {
> + *reg = base + offset / RTL8231_BITS_VAL;
> + *mask = pin_mask;
> + } else if (base == RTL8231_REG_GPIO_DIR0) {
> + *reg = RTL8231_REG_PIN_HI_CFG;
> + *mask = FIELD_PREP(RTL8231_PIN_HI_CFG_DIR_MASK, pin_mask);
> + } else {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int rtl8231_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rtl8231_pin_ctrl *ctrl;
> + struct gpio_regmap_config gpio_cfg = {};
> + int err;
> +
> + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> + if (!ctrl)
> + return -ENOMEM;
> +
> + ctrl->map = dev_get_regmap(dev->parent, NULL);
> + if (!ctrl->map)
> + return -ENODEV;
> +
> + err = rtl8231_pinctrl_init(dev, ctrl);
> + if (err)
> + return err;
> +
> + gpio_cfg.regmap = ctrl->map;
> + gpio_cfg.parent = dev->parent;
> + gpio_cfg.ngpio = RTL8231_NUM_GPIOS;
> + gpio_cfg.ngpio_per_reg = RTL8231_BITS_VAL;
> +
> + gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA_IN0);
> + gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_VREG_GPIO_DATA_OUT0);
> + gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);
> +
> + gpio_cfg.reg_mask_xlate = rtl8231_gpio_reg_mask_xlate;
> +
> + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_cfg));
> +}
> +
> +static struct platform_driver rtl8231_pinctrl_driver = {
> + .driver = {
> + .name = "rtl8231-pinctrl",
> + },
> + .probe = rtl8231_pinctrl_probe,
> +};
> +module_platform_driver(rtl8231_pinctrl_driver);
> +
> +MODULE_AUTHOR("Sander Vanheule <sander@...nheule.net>");
> +MODULE_DESCRIPTION("Realtek RTL8231 pin control and GPIO support");
> +MODULE_LICENSE("GPL v2");
> --
> 2.31.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists