lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210604194909.GA2229970@bjorn-Precision-5520>
Date:   Fri, 4 Jun 2021 14:49:09 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Sergio Paracuellos <sergio.paracuellos@...il.com>
Cc:     linux-mips@...r.kernel.org, tsbogend@...ha.franken.de,
        devicetree@...r.kernel.org, matthias.bgg@...il.com,
        john@...ozen.org, bhelgaas@...gle.com, robh+dt@...nel.org,
        linux-staging@...ts.linux.dev, gregkh@...uxfoundation.org,
        neil@...wn.name, ilya.lipnitskiy@...il.com,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH 2/4] MIPS: pci: Add driver for MT7621 PCIe controller

On Sat, May 15, 2021 at 02:40:53PM +0200, Sergio Paracuellos wrote:
> This patch adds a driver for the PCIe controller of MT7621 SoC.

If you put this in drivers/pci/, update the subject/commit log like
this:

  PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver

  Add driver for the PCIe controller of the MT7621 SoC.

> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
> ---
>  arch/mips/pci/Makefile     |   1 +
>  arch/mips/pci/pci-mt7621.c | 624 +++++++++++++++++++++++++++++++++++++
>  arch/mips/ralink/Kconfig   |   9 +-
>  3 files changed, 633 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/pci/pci-mt7621.c

I'd suggest a single commit that basically does a "git mv" from
drivers/staging/mt7621-pci to drivers/pci/controller/, with zero
changes to the driver itself.

> diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
> index f3eecc065e5c..178c550739c4 100644
> --- a/arch/mips/pci/Makefile
> +++ b/arch/mips/pci/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
>  obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
>  obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
>  obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
> +obj-$(CONFIG_PCI_MT7621)	+= pci-mt7621.o
>  #
>  # These are still pretty much in the old state, watch, go blind.
>  #
> diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
> new file mode 100644
> index 000000000000..fe1945819d25
> --- /dev/null
> +++ b/arch/mips/pci/pci-mt7621.c
> @@ -0,0 +1,624 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * BRIEF MODULE DESCRIPTION
> + *     PCI init for Ralink RT2880 solution
> + *
> + * Copyright 2007 Ralink Inc. (bruce_chang@...inktech.com.tw)
> + *
> + * May 2007 Bruce Chang
> + * Initial Release
> + *
> + * May 2009 Bruce Chang
> + * support RT2880/RT3883 PCIe
> + *
> + * May 2011 Bruce Chang
> + * support RT6855/MT7620 PCIe
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sys_soc.h>
> +
> +/* MediaTek specific configuration registers */
> +#define PCIE_FTS_NUM			0x70c
> +#define PCIE_FTS_NUM_MASK		GENMASK(15, 8)
> +#define PCIE_FTS_NUM_L0(x)		(((x) & 0xff) << 8)
> +
> +/* Host-PCI bridge registers */
> +#define RALINK_PCI_PCICFG_ADDR		0x0000
> +#define RALINK_PCI_PCIMSK_ADDR		0x000C
> +#define RALINK_PCI_CONFIG_ADDR		0x0020
> +#define RALINK_PCI_CONFIG_DATA		0x0024
> +#define RALINK_PCI_MEMBASE		0x0028
> +#define RALINK_PCI_IOBASE		0x002C
> +
> +/* PCIe RC control registers */
> +#define MT7621_PCIE_OFFSET		0x2000
> +#define MT7621_NEXT_PORT		0x1000
> +
> +#define RALINK_PCI_BAR0SETUP_ADDR	0x0010
> +#define RALINK_PCI_ID			0x0030
> +#define RALINK_PCI_CLASS		0x0034
> +#define RALINK_PCI_SUBID		0x0038
> +#define RALINK_PCI_STATUS		0x0050
> +
> +/* Some definition values */
> +#define PCIE_REVISION_ID		BIT(0)
> +#define PCIE_CLASS_CODE			(0x60400 << 8)
> +#define PCIE_BAR_MAP_MAX		GENMASK(30, 16)
> +#define PCIE_BAR_ENABLE			BIT(0)
> +#define PCIE_PORT_INT_EN(x)		BIT(20 + (x))
> +#define PCIE_PORT_LINKUP		BIT(0)
> +
> +#define PERST_DELAY_MS			100
> +
> +/**
> + * struct mt7621_pcie_port - PCIe port information
> + * @base: I/O mapped register base
> + * @list: port list
> + * @pcie: pointer to PCIe host info
> + * @clk: pointer to the port clock gate
> + * @phy: pointer to PHY control block
> + * @pcie_rst: pointer to port reset control
> + * @gpio_rst: gpio reset
> + * @slot: port slot
> + * @enabled: indicates if port is enabled
> + */
> +struct mt7621_pcie_port {
> +	void __iomem *base;
> +	struct list_head list;
> +	struct mt7621_pcie *pcie;
> +	struct clk *clk;
> +	struct phy *phy;
> +	struct reset_control *pcie_rst;
> +	struct gpio_desc *gpio_rst;
> +	u32 slot;
> +	bool enabled;
> +};
> +
> +/**
> + * struct mt7621_pcie - PCIe host information
> + * @base: IO Mapped Register Base
> + * @io: IO resource
> + * @mem: pointer to non-prefetchable memory resource
> + * @dev: Pointer to PCIe device
> + * @io_map_base: virtual memory base address for io
> + * @ports: pointer to PCIe port information
> + * @resets_inverted: depends on chip revision
> + * reset lines are inverted.
> + */
> +struct mt7621_pcie {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct resource io;
> +	struct resource *mem;
> +	unsigned long io_map_base;
> +	struct list_head ports;
> +	bool resets_inverted;
> +};
> +
> +static inline u32 pcie_read(struct mt7621_pcie *pcie, u32 reg)
> +{
> +	return readl(pcie->base + reg);
> +}
> +
> +static inline void pcie_write(struct mt7621_pcie *pcie, u32 val, u32 reg)
> +{
> +	writel(val, pcie->base + reg);
> +}
> +
> +static inline void pcie_rmw(struct mt7621_pcie *pcie, u32 reg, u32 clr, u32 set)
> +{
> +	u32 val = readl(pcie->base + reg);
> +
> +	val &= ~clr;
> +	val |= set;
> +	writel(val, pcie->base + reg);
> +}
> +
> +static inline u32 pcie_port_read(struct mt7621_pcie_port *port, u32 reg)
> +{
> +	return readl(port->base + reg);
> +}
> +
> +static inline void pcie_port_write(struct mt7621_pcie_port *port,
> +				   u32 val, u32 reg)
> +{
> +	writel(val, port->base + reg);
> +}
> +
> +static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
> +					 unsigned int func, unsigned int where)
> +{
> +	return (((where & 0xF00) >> 8) << 24) | (bus << 16) | (slot << 11) |
> +		(func << 8) | (where & 0xfc) | 0x80000000;
> +}
> +
> +static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
> +					 unsigned int devfn, int where)
> +{
> +	struct mt7621_pcie *pcie = bus->sysdata;
> +	u32 address = mt7621_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
> +					     PCI_FUNC(devfn), where);
> +
> +	writel(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
> +
> +	return pcie->base + RALINK_PCI_CONFIG_DATA + (where & 3);
> +}
> +
> +struct pci_ops mt7621_pci_ops = {
> +	.map_bus	= mt7621_pcie_map_bus,
> +	.read		= pci_generic_config_read,
> +	.write		= pci_generic_config_write,
> +};
> +
> +static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
> +{
> +	u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
> +
> +	pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
> +	return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
> +}
> +
> +static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
> +			 u32 reg, u32 val)
> +{
> +	u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
> +
> +	pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
> +	pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
> +}
> +
> +static inline void mt7621_rst_gpio_pcie_assert(struct mt7621_pcie_port *port)
> +{
> +	if (port->gpio_rst)
> +		gpiod_set_value(port->gpio_rst, 1);
> +}
> +
> +static inline void mt7621_rst_gpio_pcie_deassert(struct mt7621_pcie_port *port)
> +{
> +	if (port->gpio_rst)
> +		gpiod_set_value(port->gpio_rst, 0);
> +}
> +
> +static inline bool mt7621_pcie_port_is_linkup(struct mt7621_pcie_port *port)
> +{
> +	return (pcie_port_read(port, RALINK_PCI_STATUS) & PCIE_PORT_LINKUP) != 0;
> +}
> +
> +static inline void mt7621_control_assert(struct mt7621_pcie_port *port)
> +{
> +	struct mt7621_pcie *pcie = port->pcie;
> +
> +	if (pcie->resets_inverted)
> +		reset_control_assert(port->pcie_rst);
> +	else
> +		reset_control_deassert(port->pcie_rst);
> +}
> +
> +static inline void mt7621_control_deassert(struct mt7621_pcie_port *port)
> +{
> +	struct mt7621_pcie *pcie = port->pcie;
> +
> +	if (pcie->resets_inverted)
> +		reset_control_deassert(port->pcie_rst);
> +	else
> +		reset_control_assert(port->pcie_rst);
> +}
> +
> +static void setup_cm_memory_region(struct mt7621_pcie *pcie)
> +{
> +	struct resource *mem_resource = pcie->mem;
> +	struct device *dev = pcie->dev;
> +	resource_size_t mask;
> +
> +	if (mips_cps_numiocu(0)) {
> +		/*
> +		 * FIXME: hardware doesn't accept mask values with 1s after
> +		 * 0s (e.g. 0xffef), so it would be great to warn if that's
> +		 * about to happen
> +		 */
> +		mask = ~(mem_resource->end - mem_resource->start);
> +
> +		write_gcr_reg1_base(mem_resource->start);
> +		write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
> +		dev_info(dev, "PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
> +			 (unsigned long long)read_gcr_reg1_base(),
> +			 (unsigned long long)read_gcr_reg1_mask());
> +	}
> +}
> +
> +static int mt7621_pci_parse_request_of_pci_ranges(struct pci_host_bridge *host)
> +{
> +	struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
> +	struct device *dev = pcie->dev;
> +	struct device_node *node = dev->of_node;
> +	struct of_pci_range_parser parser;
> +	struct resource_entry *entry;
> +	struct of_pci_range range;
> +	LIST_HEAD(res);
> +
> +	if (of_pci_range_parser_init(&parser, node)) {
> +		dev_err(dev, "missing \"ranges\" property\n");
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * IO_SPACE_LIMIT for MIPS is 0xffff but this platform uses IO at
> +	 * upper address 0x001e160000. of_pci_range_to_resource does not work
> +	 * well for MIPS platforms that don't define PCI_IOBASE, so set the IO
> +	 * resource manually instead.
> +	 */
> +	for_each_of_pci_range(&parser, &range) {
> +		switch (range.flags & IORESOURCE_TYPE_BITS) {
> +		case IORESOURCE_IO:
> +			pcie->io_map_base =
> +				(unsigned long)ioremap(range.cpu_addr,
> +						       range.size);
> +			pcie->io.name = node->full_name;
> +			pcie->io.flags = range.flags;
> +			pcie->io.start = range.cpu_addr;
> +			pcie->io.end = range.cpu_addr + range.size - 1;
> +			pcie->io.parent = pcie->io.child = pcie->io.sibling = NULL;
> +			set_io_port_base(pcie->io_map_base);
> +			break;
> +		}
> +	}
> +
> +	entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
> +	if (!entry) {
> +		dev_err(dev, "Cannot get memory resource");
> +		return -EINVAL;
> +	}
> +
> +	pcie->mem = entry->res;
> +	pci_add_resource(&res, &pcie->io);
> +	pci_add_resource(&res, entry->res);
> +	list_splice_init(&res, &host->windows);
> +
> +	return 0;
> +}
> +
> +static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
> +				  int slot)
> +{
> +	struct mt7621_pcie_port *port;
> +	struct device *dev = pcie->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	char name[10];
> +
> +	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
> +
> +	port->base = devm_platform_ioremap_resource(pdev, slot + 1);
> +	if (IS_ERR(port->base))
> +		return PTR_ERR(port->base);
> +
> +	snprintf(name, sizeof(name), "pcie%d", slot);
> +	port->clk = devm_clk_get(dev, name);
> +	if (IS_ERR(port->clk)) {
> +		dev_err(dev, "failed to get pcie%d clock\n", slot);
> +		return PTR_ERR(port->clk);
> +	}
> +
> +	snprintf(name, sizeof(name), "pcie%d", slot);
> +	port->pcie_rst = devm_reset_control_get_exclusive(dev, name);
> +	if (PTR_ERR(port->pcie_rst) == -EPROBE_DEFER) {
> +		dev_err(dev, "failed to get pcie%d reset control\n", slot);
> +		return PTR_ERR(port->pcie_rst);
> +	}
> +
> +	snprintf(name, sizeof(name), "pcie-phy%d", slot);
> +	port->phy = devm_phy_get(dev, name);
> +	if (IS_ERR(port->phy) && slot != 1)
> +		return PTR_ERR(port->phy);
> +
> +	port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot,
> +						       GPIOD_OUT_LOW);
> +	if (IS_ERR(port->gpio_rst)) {
> +		dev_err(dev, "Failed to get GPIO for PCIe%d\n", slot);
> +		return PTR_ERR(port->gpio_rst);
> +	}
> +
> +	port->slot = slot;
> +	port->pcie = pcie;
> +
> +	INIT_LIST_HEAD(&port->list);
> +	list_add_tail(&port->list, &pcie->ports);
> +
> +	return 0;
> +}
> +
> +static int mt7621_pcie_parse_dt(struct mt7621_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct device_node *node = dev->of_node, *child;
> +	int err;
> +
> +	pcie->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(pcie->base))
> +		return PTR_ERR(pcie->base);
> +
> +	for_each_available_child_of_node(node, child) {
> +		int slot;
> +
> +		err = of_pci_get_devfn(child);
> +		if (err < 0) {
> +			of_node_put(child);
> +			dev_err(dev, "failed to parse devfn: %d\n", err);
> +			return err;
> +		}
> +
> +		slot = PCI_SLOT(err);
> +
> +		err = mt7621_pcie_parse_port(pcie, slot);
> +		if (err) {
> +			of_node_put(child);
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt7621_pcie_init_port(struct mt7621_pcie_port *port)
> +{
> +	struct mt7621_pcie *pcie = port->pcie;
> +	struct device *dev = pcie->dev;
> +	u32 slot = port->slot;
> +	int err;
> +
> +	err = phy_init(port->phy);
> +	if (err) {
> +		dev_err(dev, "failed to initialize port%d phy\n", slot);
> +		return err;
> +	}
> +
> +	err = phy_power_on(port->phy);
> +	if (err) {
> +		dev_err(dev, "failed to power on port%d phy\n", slot);
> +		phy_exit(port->phy);
> +		return err;
> +	}
> +
> +	port->enabled = true;
> +
> +	return 0;
> +}
> +
> +static void mt7621_pcie_reset_assert(struct mt7621_pcie *pcie)
> +{
> +	struct mt7621_pcie_port *port;
> +
> +	list_for_each_entry(port, &pcie->ports, list) {
> +		/* PCIe RC reset assert */
> +		mt7621_control_assert(port);
> +
> +		/* PCIe EP reset assert */
> +		mt7621_rst_gpio_pcie_assert(port);
> +	}
> +
> +	msleep(PERST_DELAY_MS);
> +}
> +
> +static void mt7621_pcie_reset_rc_deassert(struct mt7621_pcie *pcie)
> +{
> +	struct mt7621_pcie_port *port;
> +
> +	list_for_each_entry(port, &pcie->ports, list)
> +		mt7621_control_deassert(port);
> +}
> +
> +static void mt7621_pcie_reset_ep_deassert(struct mt7621_pcie *pcie)
> +{
> +	struct mt7621_pcie_port *port;
> +
> +	list_for_each_entry(port, &pcie->ports, list)
> +		mt7621_rst_gpio_pcie_deassert(port);
> +
> +	msleep(PERST_DELAY_MS);
> +}
> +
> +static void mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	struct mt7621_pcie_port *port, *tmp;
> +	int err;
> +
> +	mt7621_pcie_reset_assert(pcie);
> +	mt7621_pcie_reset_rc_deassert(pcie);
> +
> +	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
> +		u32 slot = port->slot;
> +
> +		if (slot == 1) {
> +			port->enabled = true;
> +			continue;
> +		}
> +
> +		err = mt7621_pcie_init_port(port);
> +		if (err) {
> +			dev_err(dev, "Initiating port %d failed\n", slot);
> +			list_del(&port->list);
> +		}
> +	}
> +
> +	mt7621_pcie_reset_ep_deassert(pcie);
> +
> +	tmp = NULL;
> +	list_for_each_entry(port, &pcie->ports, list) {
> +		u32 slot = port->slot;
> +
> +		if (!mt7621_pcie_port_is_linkup(port)) {
> +			dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
> +				slot);
> +			mt7621_control_assert(port);
> +			clk_disable_unprepare(port->clk);
> +			port->enabled = false;
> +
> +			if (slot == 0) {
> +				tmp = port;
> +				continue;
> +			}
> +
> +			if (slot == 1 && tmp && !tmp->enabled)
> +				phy_power_off(tmp->phy);
> +		}
> +	}
> +}
> +
> +static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
> +{
> +	struct mt7621_pcie *pcie = port->pcie;
> +	u32 slot = port->slot;
> +	u32 offset = MT7621_PCIE_OFFSET + (slot * MT7621_NEXT_PORT);
> +	u32 val;
> +
> +	/* enable pcie interrupt */
> +	val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
> +	val |= PCIE_PORT_INT_EN(slot);
> +	pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
> +
> +	/* map 2G DDR region */
> +	pcie_write(pcie, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
> +		   offset + RALINK_PCI_BAR0SETUP_ADDR);
> +
> +	/* configure class code and revision ID */
> +	pcie_write(pcie, PCIE_CLASS_CODE | PCIE_REVISION_ID,
> +		   offset + RALINK_PCI_CLASS);
> +}
> +
> +static int mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
> +{
> +	struct device *dev = pcie->dev;
> +	struct mt7621_pcie_port *port;
> +	u8 num_slots_enabled = 0;
> +	u32 slot;
> +	u32 val;
> +	int err;
> +
> +	/* Setup MEMWIN and IOWIN */
> +	pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
> +	pcie_write(pcie, pcie->io.start, RALINK_PCI_IOBASE);
> +
> +	list_for_each_entry(port, &pcie->ports, list) {
> +		if (port->enabled) {
> +			err = clk_prepare_enable(port->clk);
> +			if (err) {
> +				dev_err(dev, "enabling clk pcie%d\n", slot);
> +				return err;
> +			}
> +
> +			mt7621_pcie_enable_port(port);
> +			dev_info(dev, "PCIE%d enabled\n", port->slot);
> +			num_slots_enabled++;
> +		}
> +	}
> +
> +	for (slot = 0; slot < num_slots_enabled; slot++) {
> +		val = read_config(pcie, slot, PCI_COMMAND);
> +		val |= PCI_COMMAND_MASTER;
> +		write_config(pcie, slot, PCI_COMMAND, val);
> +		/* configure RC FTS number to 250 when it leaves L0s */
> +		val = read_config(pcie, slot, PCIE_FTS_NUM);
> +		val &= ~PCIE_FTS_NUM_MASK;
> +		val |= PCIE_FTS_NUM_L0(0x50);
> +		write_config(pcie, slot, PCIE_FTS_NUM, val);
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt7621_pcie_register_host(struct pci_host_bridge *host)
> +{
> +	struct mt7621_pcie *pcie = pci_host_bridge_priv(host);
> +
> +	host->ops = &mt7621_pci_ops;
> +	host->sysdata = pcie;
> +	return pci_host_probe(host);
> +}
> +
> +static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
> +	{ .soc_id = "mt7621", .revision = "E2" }
> +};
> +
> +static int mt7621_pci_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct soc_device_attribute *attr;
> +	struct mt7621_pcie *pcie;
> +	struct pci_host_bridge *bridge;
> +	int err;
> +
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
> +	if (!bridge)
> +		return -ENOMEM;
> +
> +	pcie = pci_host_bridge_priv(bridge);
> +	pcie->dev = dev;
> +	platform_set_drvdata(pdev, pcie);
> +	INIT_LIST_HEAD(&pcie->ports);
> +
> +	attr = soc_device_match(mt7621_pci_quirks_match);
> +	if (attr)
> +		pcie->resets_inverted = true;
> +
> +	err = mt7621_pcie_parse_dt(pcie);
> +	if (err) {
> +		dev_err(dev, "Parsing DT failed\n");
> +		return err;
> +	}
> +
> +	err = mt7621_pci_parse_request_of_pci_ranges(bridge);
> +	if (err) {
> +		dev_err(dev, "Error requesting pci resources from ranges");
> +		return err;
> +	}
> +
> +	/* set resources limits */
> +	ioport_resource.start = pcie->io.start;
> +	ioport_resource.end = pcie->io.end;
> +
> +	mt7621_pcie_init_ports(pcie);
> +
> +	err = mt7621_pcie_enable_ports(pcie);
> +	if (err) {
> +		dev_err(dev, "Error enabling pcie ports\n");
> +		return err;
> +	}
> +
> +	setup_cm_memory_region(pcie);
> +
> +	return mt7621_pcie_register_host(bridge);
> +}
> +
> +static const struct of_device_id mt7621_pci_ids[] = {
> +	{ .compatible = "mediatek,mt7621-pci" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
> +
> +static struct platform_driver mt7621_pci_driver = {
> +	.probe = mt7621_pci_probe,
> +	.driver = {
> +		.name = "mt7621-pci",
> +		.of_match_table = of_match_ptr(mt7621_pci_ids),
> +	},
> +};
> +builtin_platform_driver(mt7621_pci_driver);
> diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
> index ec4daa63c5e3..50e5a54f7d9e 100644
> --- a/arch/mips/ralink/Kconfig
> +++ b/arch/mips/ralink/Kconfig
> @@ -56,7 +56,7 @@ choice
>  		select MIPS_GIC
>  		select COMMON_CLK
>  		select CLKSRC_MIPS_GIC
> -		select HAVE_PCI if PCI_MT7621
> +		select HAVE_PCI
>  		select SOC_BUS
>  endchoice
>  
> @@ -101,4 +101,11 @@ choice
>  
>  endchoice
>  
> +config PCI_MT7621
> +	bool "MediaTek MT7621 PCI Controller"
> +	depends on RALINK && SOC_MT7621
> +	select PCI_DRIVERS_GENERIC
> +	help
> +	  This selects a driver for the MediaTek MT7621 PCI Controller.
> +
>  endif
> -- 
> 2.25.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ