Message-ID: <CAMhs-H-XW83WUa9pF1qWnPSyO3Q4O_D6M_pF1K-DETf6iwO-aQ@mail.gmail.com>
Date:   Sat, 5 Jun 2021 07:13:21 +0200
From:   Sergio Paracuellos <sergio.paracuellos@...il.com>
To:     Pali Rohár <pali@...nel.org>
Cc:     "open list:MIPS" <linux-mips@...r.kernel.org>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        John Crispin <john@...ozen.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>,
        linux-staging@...ts.linux.dev,
        Greg KH <gregkh@...uxfoundation.org>,
        NeilBrown <neil@...wn.name>,
        Ilya Lipnitskiy <ilya.lipnitskiy@...il.com>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-pci@...r.kernel.org
Subject: Re: [PATCH 2/4] MIPS: pci: Add driver for MT7621 PCIe controller

Hi Pali,

On Sat, Jun 5, 2021 at 1:07 AM Pali Rohár <pali@...nel.org> wrote:
>
> On Friday 04 June 2021 20:44:42 Sergio Paracuellos wrote:
> > Hi Pali,
> >
> > Thanks for your comments.
> >
> > On Fri, Jun 4, 2021 at 6:55 PM Pali Rohár <pali@...nel.org> wrote:
> > >
> > > On Wednesday 02 June 2021 14:43:53 Sergio Paracuellos wrote:
> > > > Hi Pali,
> > > >
> > > > On Wed, Jun 2, 2021 at 2:23 PM Pali Rohár <pali@...nel.org> wrote:
> > > > >
> > > > > On Wednesday 02 June 2021 14:16:26 Sergio Paracuellos wrote:
> > > > > > Hi Pali,
> > > > > >
> > > > > > On Mon, May 31, 2021 at 4:19 PM Sergio Paracuellos
> > > > > > <sergio.paracuellos@...il.com> wrote:
> > > > > > >
> > > > > > > On Mon, May 31, 2021 at 3:50 PM Pali Rohár <pali@...nel.org> wrote:
> > > > > > > >
> > > > > > > > On Monday 31 May 2021 15:39:55 Sergio Paracuellos wrote:
> > > > > > > > > Hi Pali,
> > > > > > > > >
> > > > > > > > > Thanks for your comments.
> > > > > > > > >
> > > > > > > > > On Mon, May 31, 2021 at 3:14 PM Pali Rohár <pali@...nel.org> wrote:
> > > > > > > > > >
> > > > > > > > > > On Saturday 15 May 2021 14:40:53 Sergio Paracuellos wrote:
> > > > > > > > > > > This patch adds a driver for the PCIe controller of MT7621 SoC.
> > > > > > > > > > >
> > > > > > > > > > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
> > > > > > > > > > > ---
> > > > > > > > > > >  arch/mips/pci/Makefile     |   1 +
> > > > > > > > > > >  arch/mips/pci/pci-mt7621.c | 624 +++++++++++++++++++++++++++++++++++++
> > > > > > > > > > >  arch/mips/ralink/Kconfig   |   9 +-
> > > > > > > > > > >  3 files changed, 633 insertions(+), 1 deletion(-)
> > > > > > > > > > >  create mode 100644 arch/mips/pci/pci-mt7621.c
> > > > > > > > > > >
> > > > > > > > > > > diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
> > > > > > > > > > > index f3eecc065e5c..178c550739c4 100644
> > > > > > > > > > > --- a/arch/mips/pci/Makefile
> > > > > > > > > > > +++ b/arch/mips/pci/Makefile
> > > > > > > > > > > @@ -24,6 +24,7 @@ obj-$(CONFIG_PCI_AR2315)    += pci-ar2315.o
> > > > > > > > > > >  obj-$(CONFIG_SOC_AR71XX)     += pci-ar71xx.o
> > > > > > > > > > >  obj-$(CONFIG_PCI_AR724X)     += pci-ar724x.o
> > > > > > > > > > >  obj-$(CONFIG_PCI_XTALK_BRIDGE)       += pci-xtalk-bridge.o
> > > > > > > > > > > +obj-$(CONFIG_PCI_MT7621)     += pci-mt7621.o
> > > > > > > > > > >  #
> > > > > > > > > > >  # These are still pretty much in the old state, watch, go blind.
> > > > > > > > > > >  #
> > > > > > > > > > > diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
> > > > > > > > > > > new file mode 100644
> > > > > > > > > > > index 000000000000..fe1945819d25
> > > > > > > > > > > --- /dev/null
> > > > > > > > > > > +++ b/arch/mips/pci/pci-mt7621.c
> > > > > > > > > > ...
> > > > > > > > > > > +static int mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
> > > > > > > > > > > +{
> > > > > > > > > > > +     struct device *dev = pcie->dev;
> > > > > > > > > > > +     struct mt7621_pcie_port *port;
> > > > > > > > > > > +     u8 num_slots_enabled = 0;
> > > > > > > > > > > +     u32 slot;
> > > > > > > > > > > +     u32 val;
> > > > > > > > > > > +     int err;
> > > > > > > > > > > +
> > > > > > > > > > > +     /* Setup MEMWIN and IOWIN */
> > > > > > > > > > > +     pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
> > > > > > > > > > > +     pcie_write(pcie, pcie->io.start, RALINK_PCI_IOBASE);
> > > > > > > > > > > +
> > > > > > > > > > > +     list_for_each_entry(port, &pcie->ports, list) {
> > > > > > > > > > > +             if (port->enabled) {
> > > > > > > > > > > +                     err = clk_prepare_enable(port->clk);
> > > > > > > > > > > +                     if (err) {
> > > > > > > > > > > +                             dev_err(dev, "enabling clk pcie%d\n", slot);
> > > > > > > > > > > +                             return err;
> > > > > > > > > > > +                     }
> > > > > > > > > > > +
> > > > > > > > > > > +                     mt7621_pcie_enable_port(port);
> > > > > > > > > > > +                     dev_info(dev, "PCIE%d enabled\n", port->slot);
> > > > > > > > > > > +                     num_slots_enabled++;
> > > > > > > > > > > +             }
> > > > > > > > > > > +     }
> > > > > > > > > > > +
> > > > > > > > > > > +     for (slot = 0; slot < num_slots_enabled; slot++) {
> > > > > > > > > > > +             val = read_config(pcie, slot, PCI_COMMAND);
> > > > > > > > > > > +             val |= PCI_COMMAND_MASTER;
> > > > > > > > > > > +             write_config(pcie, slot, PCI_COMMAND, val);
> > > > > > > > > >
> > > > > > > > > > Hello! Is this part of code correct? Because it looks strange if PCIe
> > > > > > > > > > controller driver automatically enables PCI bus mastering, prior device
> > > > > > > > > > driver initialize itself.
> > > > > > > > > >
> > > > > > > > > > Moreover kernel has already function pci_set_master() for this purpose
> > > > > > > > > > which is used by device drivers.
> > > > > > > > > >
> > > > > > > > > > So I think this code can confuse some device drivers...
> > > > > > > > >
> > > > > > > > > I agree that we have pci_set_master() to be used in pci device driver
> > > > > > > > > code. Original controller driver set this bit for enabled slots. Since
> > > > > > > > > there is no documentation at all for the PCI in this SoC
> > > > > > > >
> > > > > > > > I see... this is really a big problem to do any driver development...
> > > > > > >
> > > > > > > For sure it is :(.
> > > > > > >
> > > > > > > >
> > > > > > > > > I have
> > > > > > > > > maintained the setting in the driver in a cleaner way. See original
> > > > > > > > > driver code and the setting here [0]. There is no other reason than
> > > > > > > > > that. I am ok with removing this from here and testing with my two
> > > > > > > > > devices that everything is still ok if having this setting in the pci
> > > > > > > > > controller driver is a real problem.
> > > > > > > >
> > > > > > > > You can run lspci -nnvv with and without PCI_COMMAND_MASTER code and
> > > > > > > > then compare outputs.
> > > > > > > >
> > > > > > > > Device drivers for sure enable PCI_COMMAND_MASTER at the time when it is
> > > > > > > > needed, so it is possible that there would be no difference in lspci
> > > > > > > > output.
> > > > > > >
> > > > > > > Thanks. I will take this into account when v2 is submitted after more
> > > > > > > review comments come :).
> > > > > >
> > > > > > I have tested to remove this and check lspci -nnvv output with and
> > > > > > without PCI_COMMAND_MASTER code and, as you pointed out, there is no
> > > > > > difference between them. Also, both boards are working without
> > > > > > regressions at all. So I will remove this code for next version.
> > > > >
> > > > > Perfect!
> > > > >
> > > > > > Thanks,
> > > > > >     Sergio Paracuellos
> > > > > > >
> > > > > > > >
> > > > > > > > > [0]: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git/tree/drivers/staging/mt7621-pci/pci-mt7621.c?h=v4.18#n676
> > > > > > > > >
> > > > > > > > > Best regards,
> > > > > > > > >     Sergio Paracuellos
> > > > > > > > > >
> > > > > > > > > > > +             /* configure RC FTS number to 250 when it leaves L0s */
> > > > > > > > > > > +             val = read_config(pcie, slot, PCIE_FTS_NUM);
> > > > > > > > > > > +             val &= ~PCIE_FTS_NUM_MASK;
> > > > > > > > > > > +             val |= PCIE_FTS_NUM_L0(0x50);
> > > > > > > > > > > +             write_config(pcie, slot, PCIE_FTS_NUM, val);
> > > > >
> > > > > Could you look also what is doing this code (PCIE_FTS_NUM)? It is marked
> > > > > as MT specific register. But from this code for me it looks like that it
> > > > > just access config space of some device and therefore it could be some
> > > > > standard PCIe register. Just with hardcoded calculated offset.
> > >
> > > So based on your lspci output, there is no PCIe capability register at
> > > address PCIE_FTS_NUM (0x70c), right? It seems strange to trying access
> > > capability register outside of capability list.
> >
> > This setting is also in the original driver code from mediatek SDK. See [0].
> > Anyway, I have tried to remove this code and test what happens with my
> > two boards and both of them seem to
> > work properly just by deleting this code.
>
> Looks like that this code is some designware stuff which seems to be
> needed. So it would be better to let it here as is.

Ok, will do.

>
> > > > > Could you provide output from lspci -nnvv? So other people could look at
> > > > > it and maybe we decode what is this code doing and if it is needed.
> > > >
> > > > # lspci -nnvv
> > > > 00:02.0 PCI bridge [0604]: Device [0e8d:0801] (rev 01) (prog-if 00
> > > > [Normal decode])
> > >
> > > Hm... Device address is 02. But in your code is:
> > >
> > >     u8 num_slots_enabled = 0;
> > >     ...
> > >     list_for_each_entry(port, &pcie->ports, list) {
> > >         if (port->enabled) {
> > >             ...
> > >             num_slots_enabled++;
> > >             ...
> > >         }
> > >     }
> > >     ...
> > >     for (slot = 0; slot < num_slots_enabled; slot++) {
> > >         val = read_config(pcie, slot, ...);
> > >         ...
> > >         write_config(pcie, slot, ...);
> > >     }
> > >
> > > Which means that this code writes to config space of wrong device 0
> > > (instead of 2)! In function write_config() can be seen that second
> > > parameter specify device of BDF address for bus=0 and function=0.
> >
> > Bridge enumeration depends on a virtual bridge register configuration.
> > But at the end devices connected to the bridge
> > are enumerated as 01:00.0, 02:00.0 and 03:00.0. So in this case the
> > phy used is the one for "pcie2" (00:02.0) and the device connected to
> > it
> > is 01:00.0. For example a board using all the virtual bridges will get
> > an output similar to:
> >
> > [   16.487166] mt7621-pci 1e140000.pcie: host bridge /pcie@...40000 ranges:
> > [   16.500627] mt7621-pci 1e140000.pcie:   No bus range found for
> > /pcie@...40000, using [bus 00-ff]
> > [   16.518212] mt7621-pci 1e140000.pcie:      MEM
> > 0x0060000000..0x006fffffff -> 0x0000000000
> > [   16.534531] mt7621-pci 1e140000.pcie:       IO
> > 0x001e160000..0x001e16ffff -> 0x0000000000
> > [   16.786498] mt7621-pci 1e140000.pcie: PCIE0 enabled
> > [   16.796220] mt7621-pci 1e140000.pcie: PCIE1 enabled
> > [   16.805943] mt7621-pci 1e140000.pcie: PCIE2 enabled
> > [   16.815664] mt7621-pci 1e140000.pcie: PCI coherence region base:
> > 0x60000000, mask/settings: 0xf0000002
> > [   16.834398] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
> > [   16.847098] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
> > [   16.860806] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
> > [   16.874504] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [   16.885441] pci_bus 0000:00: root bus resource [mem
> > 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff])
> > [   16.905773] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
> > [   16.917772] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> > [   16.930260] pci 0000:00:00.0: reg 0x14: initial BAR value 0x00000000 invalid
> > [   16.944304] pci 0000:00:00.0: reg 0x14: [mem size 0x00010000]
> > [   16.955841] pci 0000:00:00.0: supports D1
> > [   16.963837] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
> > [   16.975747] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
> > [   16.987772] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> > [   17.000273] pci 0000:00:01.0: reg 0x14: initial BAR value 0x00000000 invalid
> > [   17.014311] pci 0000:00:01.0: reg 0x14: [mem size 0x00010000]
> > [   17.025838] pci 0000:00:01.0: supports D1
> > [   17.033828] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
> > [   17.045699] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
> > [   17.057726] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> > [   17.070218] pci 0000:00:02.0: reg 0x14: initial BAR value 0x00000000 invalid
> > [   17.084260] pci 0000:00:02.0: reg 0x14: [mem size 0x00010000]
> > [   17.095788] pci 0000:00:02.0: supports D1
> > [   17.103785] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
> > [   17.116598] pci 0000:00:00.0: bridge configuration invalid ([bus
> > 00-00]), reconfiguring
> > [   17.132566] pci 0000:00:01.0: bridge configuration invalid ([bus
> > 00-00]), reconfiguring
> > [   17.148514] pci 0000:00:02.0: bridge configuration invalid ([bus
> > 00-00]), reconfiguring
> > [   17.164739] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185
> > [   17.176775] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x0007]
> > [   17.187892] pci 0000:01:00.0: reg 0x14: [io  0x0000-0x0003]
> > [   17.199009] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x0007]
> > [   17.210130] pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x0003]
> > [   17.221246] pci 0000:01:00.0: reg 0x20: [io  0x0000-0x000f]
> > [   17.232357] pci 0000:01:00.0: reg 0x24: initial BAR value 0x00000000 invalid
> > [   17.246411] pci 0000:01:00.0: reg 0x24: [mem size 0x00000200]
> > [   17.258031] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth,
> > limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000
> > Gb/s with 5.0 GT/s PCIe x1 link)
> > [   17.317563] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> > [   17.328033] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
> > [   17.340179] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
> > [   17.353703] pci 0000:00:00.0:   bridge window [mem
> > 0x60000000-0x600fffff pref]
> > [   17.368097] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> > [   17.381550] pci 0000:02:00.0: [1b21:0611] type 00 class 0x010185
> > [   17.393573] pci 0000:02:00.0: reg 0x10: [io  0x0000-0x0007]
> > [   17.404694] pci 0000:02:00.0: reg 0x14: [io  0x0000-0x0003]
> > [   17.415804] pci 0000:02:00.0: reg 0x18: [io  0x0000-0x0007]
> > [   17.426916] pci 0000:02:00.0: reg 0x1c: [io  0x0000-0x0003]
> > [   17.438040] pci 0000:02:00.0: reg 0x20: [io  0x0000-0x000f]
> > [   17.449148] pci 0000:02:00.0: reg 0x24: initial BAR value 0x00000000 invalid
> > [   17.463193] pci 0000:02:00.0: reg 0x24: [mem size 0x00000200]
> > [   17.474803] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth,
> > limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000
> > Gb/s with 5.0 GT/s PCIe x1 link)
> > [   17.527554] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
> > [   17.538014] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
> > [   17.550159] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x600fffff]
> > [   17.563682] pci 0000:00:01.0:   bridge window [mem
> > 0x60000000-0x600fffff pref]
> > [   17.578078] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
> > [   17.591529] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185
> > [   17.603545] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
> > [   17.614665] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
> > [   17.625775] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
> > [   17.636887] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
> > [   17.648009] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x000f]
> > [   17.659119] pci 0000:03:00.0: reg 0x24: initial BAR value 0x00000000 invalid
> > [   17.673162] pci 0000:03:00.0: reg 0x24: [mem size 0x00000200]
> > [   17.684777] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth,
> > limited by 2.5 GT/s PCIe x1 link at 0000:00:02.0 (capable of 4.000
> > Gb/s with 5.0 GT/s PCIe x1 link)
> > [   17.737561] pci 0000:00:02.0: PCI bridge to [bus 03-ff]
> > [   17.748022] pci 0000:00:02.0:   bridge window [io  0x0000-0x0fff]
> > [   17.760167] pci 0000:00:02.0:   bridge window [mem 0x60000000-0x600fffff]
> > [   17.773690] pci 0000:00:02.0:   bridge window [mem
> > 0x60000000-0x600fffff pref]
> > [   17.788085] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
> > [   17.801341] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
> > [   17.814518] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
> > [   17.828392] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
> > [   17.841571] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
> > [   17.855443] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
> > [   17.868626] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
> > [   17.882502] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
> > [   17.896028] pci 0000:00:00.0: BAR 9: assigned [mem
> > 0x60100000-0x601fffff pref]
> > [   17.910419] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
> > [   17.923951] pci 0000:00:01.0: BAR 9: assigned [mem
> > 0x60300000-0x603fffff pref]
> > [   17.938353] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
> > [   17.951879] pci 0000:00:02.0: BAR 9: assigned [mem
> > 0x60500000-0x605fffff pref]
> > [   17.966273] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
> > [   17.979809] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
> > [   17.993341] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
> > [   18.006877] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
> > [   18.020408] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
> > [   18.033932] pci 0000:00:02.0: BAR 7: assigned [io  0x1e162000-0x1e162fff]
> > [   18.047472] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
> > [   18.061005] pci 0000:01:00.0: BAR 4: assigned [io  0x1e160000-0x1e16000f]
> > [   18.074540] pci 0000:01:00.0: BAR 0: assigned [io  0x1e160010-0x1e160017]
> > [   18.088070] pci 0000:01:00.0: BAR 2: assigned [io  0x1e160018-0x1e16001f]
> > [   18.101606] pci 0000:01:00.0: BAR 1: assigned [io  0x1e160020-0x1e160023]
> > [   18.115139] pci 0000:01:00.0: BAR 3: assigned [io  0x1e160024-0x1e160027]
> > [   18.128676] pci 0000:00:00.0: PCI bridge to [bus 01]
> > [   18.138577] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
> > [   18.152100] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
> > [   18.165627] pci 0000:00:00.0:   bridge window [mem
> > 0x60100000-0x601fffff pref]
> > [   18.180030] pci 0000:02:00.0: BAR 5: assigned [mem 0x60200000-0x602001ff]
> > [   18.193566] pci 0000:02:00.0: BAR 4: assigned [io  0x1e161000-0x1e16100f]
> > [   18.207110] pci 0000:02:00.0: BAR 0: assigned [io  0x1e161010-0x1e161017]
> > [   18.220648] pci 0000:02:00.0: BAR 2: assigned [io  0x1e161018-0x1e16101f]
> > [   18.234183] pci 0000:02:00.0: BAR 1: assigned [io  0x1e161020-0x1e161023]
> > [   18.247723] pci 0000:02:00.0: BAR 3: assigned [io  0x1e161024-0x1e161027]
> > [   18.261257] pci 0000:00:01.0: PCI bridge to [bus 02]
> > [   18.271165] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
> > [   18.284695] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
> > [   18.298225] pci 0000:00:01.0:   bridge window [mem
> > 0x60300000-0x603fffff pref]
> > [   18.312630] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
> > [   18.326166] pci 0000:03:00.0: BAR 4: assigned [io  0x1e162000-0x1e16200f]
> > [   18.339702] pci 0000:03:00.0: BAR 0: assigned [io  0x1e162010-0x1e162017]
> > [   18.353237] pci 0000:03:00.0: BAR 2: assigned [io  0x1e162018-0x1e16201f]
> > [   18.366775] pci 0000:03:00.0: BAR 1: assigned [io  0x1e162020-0x1e162023]
> > [   18.380311] pci 0000:03:00.0: BAR 3: assigned [io  0x1e162024-0x1e162027]
> > [   18.393841] pci 0000:00:02.0: PCI bridge to [bus 03]
> > [   18.403740] pci 0000:00:02.0:   bridge window [io  0x1e162000-0x1e162fff]
> > [   18.417270] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
> > [   18.430801] pci 0000:00:02.0:   bridge window [mem
> > 0x60500000-0x605fffff pref]
> > [   18.445529] ahci 0000:01:00.0: version 3.0
> > [   18.445559] pci 0000:00:00.0: enabling device (0000 -> 0003)
> > [   18.456853] ahci 0000:01:00.0: enabling device (0000 -> 0003)
> > [   18.468455] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
> > [   18.481700] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6
> > Gbps 0x3 impl IDE mode
> > [   18.497662] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo
> > pmp pio slum part ccc sxs
> > [   18.516777] scsi host0: ahci
> > [   18.523629] scsi host1: ahci
> > [   18.529829] ata1: SATA max UDMA/133 abar m512@...0000000 port
> > 0x60000100 irq 22
> > [   18.544447] ata2: SATA max UDMA/133 abar m512@...0000000 port
> > 0x60000180 irq 22
> > [   18.559465] pci 0000:00:01.0: enabling device (0000 -> 0003)
> > [   18.570786] ahci 0000:02:00.0: enabling device (0000 -> 0003)
> > [   18.582414] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
> > [   18.595665] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6
> > Gbps 0x3 impl IDE mode
> > [   18.611614] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo
> > pmp pio slum part ccc sxs
> > [   18.631053] scsi host2: ahci
> > [   18.637983] scsi host3: ahci
> > [   18.644138] ata3: SATA max UDMA/133 abar m512@...0200000 port
> > 0x60200100 irq 23
> > [   18.658792] ata4: SATA max UDMA/133 abar m512@...0200000 port
> > 0x60200180 irq 23
> > [   18.673827] pci 0000:00:02.0: enabling device (0000 -> 0003)
> > [   18.685151] ahci 0000:03:00.0: enabling device (0000 -> 0003)
> > [   18.696782] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
> > [   18.710025] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6
> > Gbps 0x3 impl IDE mode
> > [   18.725972] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo
> > pmp pio slum part ccc sxs
> >
> > And you are totally right, the setting is writing in the wrong place.
> > I changed the device tree and the way interrupts are mapped
> > to avoid using a custom 'map_irq' function [1]. Before that commit the
> > pci virtual bridge register was reordering the
> > buses enumeration depending on link status, so there I should also
> > properly rewrite the code in question.
> >
> > I can rewrite the code to read and write config properly using the
> > slot moving the code into 'mt7621_pcie_enable_port' as follows:
> >
> > static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
> > {
> >     struct mt7621_pcie *pcie = port->pcie;
> >     u32 slot = port->slot;
> >     u32 offset = MT7621_PCIE_OFFSET + (slot * MT7621_NEXT_PORT);
> >     u32 val;
> >
> >     /* enable pcie interrupt */
> >     val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
> >     val |= PCIE_PORT_INT_EN(slot);
> >
> >     /* map 2G DDR region */
> >     pcie_write(pcie, PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
> >            offset + RALINK_PCI_BAR0SETUP_ADDR);
> >
> >     /* configure class code and revision ID */
> >     pcie_write(pcie, PCIE_CLASS_CODE | PCIE_REVISION_ID,
> >            offset + RALINK_PCI_CLASS);
> >
> >     /* configure RC FTS number to 250 when it leaves L0s */
> >     val = read_config(pcie, slot, PCIE_FTS_NUM);
> >     val &= ~PCIE_FTS_NUM_MASK;
> >     val |= PCIE_FTS_NUM_L0(0x50);
> >     write_config(pcie, slot, PCIE_FTS_NUM, val);
> > }
> >
> > static int mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
> > {
> >     struct device *dev = pcie->dev;
> >     struct mt7621_pcie_port *port;
> >     int err;
> >
> >     /* Setup MEMWIN and IOWIN */
> >     pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
> >     pcie_write(pcie, pcie->io.start, RALINK_PCI_IOBASE);
> >
> >     list_for_each_entry(port, &pcie->ports, list) {
> >         if (port->enabled) {
> >             err = clk_prepare_enable(port->clk);
> >             if (err) {
> >                 dev_err(dev, "enabling clk pcie%d\n",
> >                     port->slot);
> >                 return err;
> >             }
> >
> >             mt7621_pcie_enable_port(port);
> >             dev_info(dev, "PCIE%d enabled\n", port->slot);
> >         }
> >     }
> >
> >     return 0;
> > }
> >
> > Or just delete the setting and the read and write config functions
> > since they are not being used in any other place. My two boards work
> > without this setting but I don't know about other boards.
> >
> > What do you think?
>
> I think that your above modification is fine and make code more
> straightforward. Thanks for looking at it!

Ok I will change this in this way, then.

Thanks for your comments and help.

Best regards,
    Sergio Paracuellos

>
> > Best regards,
> >     Sergio Paracuellos
> >
> > [0]: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git/tree/drivers/staging/mt7621-pci/pci-mt7621.c?h=v4.18#n663
> > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git/commit/drivers/staging/mt7621-pci?h=staging-testing&id=b99cc3a2b6b62cf994acac5cced03298d9908c9b

Powered by blists - more mailing lists