[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sun, 6 Jun 2021 23:14:57 +0200
From: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To: Jitao Shi <jitao.shi@...iatek.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
linux-pwm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
srv_heupstream@...iatek.com, yingjoe.chen@...iatek.com,
eddie.huang@...iatek.com, cawa.cheng@...iatek.com,
bibby.hsieh@...iatek.com, ck.hu@...iatek.com, stonea168@....com,
huijuan.xie@...iatek.com
Subject: Re: [PATCH v4 2/3] pwm: mtk-disp: move the commit to clock enabled
On Thu, Jun 03, 2021 at 06:05:30PM +0800, Jitao Shi wrote:
> Due to the clock sequence changing, so move the reg commit to
Which change do you refer to, here? The previous patch? If so, I assume
this means the series is not bisectable because the driver is broken
when only the first patch is applied?
> config().
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> ---
> drivers/pwm/pwm-mtk-disp.c | 20 +++++++-------------
> 1 file changed, 7 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
> index b5771e2c54b8..b87b3c00a685 100644
> --- a/drivers/pwm/pwm-mtk-disp.c
> +++ b/drivers/pwm/pwm-mtk-disp.c
> @@ -135,6 +135,13 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
> mdp->data->commit_mask,
> 0x0);
> + } else {
You dropped the code comment? Is it wrong? Or is it too obvious to be
mentioned?
> + mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> + mdp->data->bls_debug_mask,
> + mdp->data->bls_debug_mask);
> + mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> + mdp->data->con0_sel,
> + mdp->data->con0_sel);
> }
>
> return 0;
> @@ -208,19 +215,6 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, mdp);
>
> - /*
> - * For MT2701, disable double buffer before writing register
> - * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
> - */
> - if (!mdp->data->has_commit) {
> - mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> - mdp->data->bls_debug_mask,
> - mdp->data->bls_debug_mask);
> - mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> - mdp->data->con0_sel,
> - mdp->data->con0_sel);
> - }
> -
> return 0;
> }
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists