| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210607193500.3085920-1-robh@kernel.org>
Date: Mon, 7 Jun 2021 14:35:00 -0500
From: Rob Herring <robh@...nel.org>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Vignesh Raghavendra <vigneshr@...com>,
linux-mtd@...ts.infradead.org
Subject: [PATCH] dt-bindings: mtd: Convert mtd-physmap to DT schema
Convert the mtd-physmap binding to DT schema format. The arm-versatile,
cypress,hyperflash and intel,ixp4xx-flash are all just an additional
compatible string, so they are all merged into the main schema.
There doesn't appear to be any users nor support for 'vendor-id' and
'device-id', so these have been dropped.
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Miquel Raynal <miquel.raynal@...tlin.com>
Cc: Richard Weinberger <richard@....at>
Cc: Vignesh Raghavendra <vigneshr@...com>
Cc: linux-mtd@...ts.infradead.org
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/mtd/arm-versatile.txt | 26 ---
.../bindings/mtd/cypress,hyperflash.txt | 13 --
.../bindings/mtd/intel,ixp4xx-flash.txt | 22 --
.../devicetree/bindings/mtd/mtd-physmap.txt | 114 ----------
.../devicetree/bindings/mtd/mtd-physmap.yaml | 208 ++++++++++++++++++
5 files changed, 208 insertions(+), 175 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mtd/arm-versatile.txt
delete mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
delete mode 100644 Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt
delete mode 100644 Documentation/devicetree/bindings/mtd/mtd-physmap.txt
create mode 100644 Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
diff --git a/Documentation/devicetree/bindings/mtd/arm-versatile.txt b/Documentation/devicetree/bindings/mtd/arm-versatile.txt
deleted file mode 100644
index 4ec28796a3c0..000000000000
--- a/Documentation/devicetree/bindings/mtd/arm-versatile.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Flash device on ARM Versatile board
-
-These flash chips are found in the ARM reference designs like Integrator,
-Versatile, RealView, Versatile Express etc.
-
-They are regular CFI compatible (Intel or AMD extended) flash chips with
-some special write protect/VPP bits that can be controlled by the machine's
-system controller.
-
-Required properties:
-- compatible : must be "arm,versatile-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- bank-width : width in bytes of flash interface.
-
-For the rest of the properties, see mtd-physmap.txt.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@...00000 {
- compatible = "arm,versatile-flash", "cfi-flash";
- reg = <0x34000000 0x4000000>;
- bank-width = <4>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
deleted file mode 100644
index ad42f4db32f1..000000000000
--- a/Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus
-specification and supports Cypress CFI specification 1.5 command set.
-
-Required properties:
-- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips
-- reg : Address of flash's memory map
-
-Example:
-
- flash@0 {
- compatible = "cypress,hyperflash", "cfi-flash";
- reg = <0x0 0x4000000>;
- };
diff --git a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt b/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt
deleted file mode 100644
index 4bdcb92ae381..000000000000
--- a/Documentation/devicetree/bindings/mtd/intel,ixp4xx-flash.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Flash device on Intel IXP4xx SoC
-
-This flash is regular CFI compatible (Intel or AMD extended) flash chips with
-specific big-endian or mixed-endian memory access pattern.
-
-Required properties:
-- compatible : must be "intel,ixp4xx-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- bank-width : width in bytes of flash interface, should be <2>
-
-For the rest of the properties, see mtd-physmap.txt.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@...00000 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- reg = <0x50000000 0x01000000>;
- bank-width = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
deleted file mode 100644
index c69f4f065d23..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
-
-Flash chips (Memory Technology Devices) are often used for solid state
-file systems on embedded devices.
-
- - compatible : should contain the specific model of mtd chip(s)
- used, if known, followed by either "cfi-flash", "jedec-flash",
- "mtd-ram" or "mtd-rom".
- - reg : Address range(s) of the mtd chip(s)
- It's possible to (optionally) define multiple "reg" tuples so that
- non-identical chips can be described in one node.
- - bank-width : Width (in bytes) of the bank. Equal to the
- device width times the number of interleaved chips.
- - device-width : (optional) Width of a single mtd chip. If
- omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the device has
- sub-nodes representing partitions (see below). In this case
- both #address-cells and #size-cells must be equal to 1.
- - no-unaligned-direct-access: boolean to disable the default direct
- mapping of the flash.
- On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause
- problems with JFFS2 usage, as the local bus (LPB) doesn't support
- unaligned accesses as implemented in the JFFS2 code via memcpy().
- By defining "no-unaligned-direct-access", the flash will not be
- exposed directly to the MTD users (e.g. JFFS2) any more.
- - linux,mtd-name: allow to specify the mtd name for retro capability with
- physmap-flash drivers as boot loader pass the mtd partition via the old
- device name physmap-flash.
- - use-advanced-sector-protection: boolean to enable support for the
- advanced sector protection (Spansion: PPB - Persistent Protection
- Bits) locking.
- - addr-gpios : (optional) List of GPIO descriptors that will be used to
- address the MSBs address lines. The order goes from LSB to MSB.
-
-For JEDEC compatible devices, the following additional properties
-are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
-For ROM compatible devices (and ROM fallback from cfi-flash), the following
-additional (optional) property is defined:
-
- - erase-size : The chip's physical erase block size in bytes.
-
- The device tree may optionally contain endianness property.
- little-endian or big-endian : It Represents the endianness that should be used
- by the controller to properly read/write data
- from/to the flash. If this property is missing,
- the endianness is chosen by the system
- (potentially based on extra configuration options).
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
- flash@...00000 {
- compatible = "amd,am29lv128ml", "cfi-flash";
- reg = <ff000000 01000000>;
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- fs@0 {
- label = "fs";
- reg = <0 f80000>;
- };
- firmware@...000 {
- label ="firmware";
- reg = <f80000 80000>;
- read-only;
- };
- };
-
-Here an example with multiple "reg" tuples:
-
- flash@...00000,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "intel,PC48F4400P0VB", "cfi-flash";
- reg = <0 0x00000000 0x02000000
- 0 0x02000000 0x02000000>;
- bank-width = <2>;
- partition@0 {
- label = "test-part1";
- reg = <0 0x04000000>;
- };
- };
-
-An example using SRAM:
-
- sram@2,0 {
- compatible = "samsung,k6f1616u6a", "mtd-ram";
- reg = <2 0 0x00200000>;
- bank-width = <2>;
- };
-
-An example using gpio-addrs
-
- flash@...00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash", "jedec-flash";
- reg = <0x20000000 0x02000000>;
- ranges = <0 0x00000000 0x02000000
- 1 0x02000000 0x02000000>;
- bank-width = <2>;
- addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- partition@0 {
- label = "test-part1";
- reg = <0 0x04000000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
new file mode 100644
index 000000000000..13c29cc91b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
+
+maintainers:
+ - Rob Herring <robh@...nel.org>
+
+description: |
+ Flash chips (Memory Technology Devices) are often used for solid state
+ file systems on embedded devices.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amd,s29gl01gp
+ - amd,s29gl032a
+ - amd,s29gl256n
+ - amd,s29gl512n
+ - arm,versatile-flash
+ - cortina,gemini-flash
+ - cypress,hyperflash
+ - ge,imp3a-firmware-mirror
+ - ge,imp3a-paged-flash
+ - gef,ppc9a-firmware-mirror
+ - gef,ppc9a-paged-flash
+ - gef,sbc310-firmware-mirror
+ - gef,sbc310-paged-flash
+ - gef,sbc610-firmware-mirror
+ - gef,sbc610-paged-flash
+ - intel,28f128j3
+ - intel,dt28f160
+ - intel,ixp4xx-flash
+ - intel,JS28F128
+ - intel,JS28F640
+ - intel,PC28F640P30T85
+ - numonyx,js28f00a
+ - numonyx,js28f128
+ - sst,sst39vf320
+ - xlnx,xps-mch-emc-2.00.a
+ - const: cfi-flash
+ - items:
+ - enum:
+ - cypress,cy7c1019dv33-10zsxi
+ - arm,vexpress-psram
+ - const: mtd-ram
+ - enum:
+ - cfi-flash
+ - jedec-flash
+ - mtd-ram
+ - mtd-rom
+
+ reg:
+ description: |
+ It's possible to (optionally) define multiple "reg" tuples so that
+ non-identical chips can be described in one node.
+ minItems: 1
+ maxItems: 8
+
+ bank-width:
+ description: Width (in bytes) of the bank. Equal to the device width times
+ the number of interleaved chips.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 4 ]
+
+ device-width:
+ description:
+ Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2 ]
+
+ no-unaligned-direct-access:
+ type: boolean
+ description: |
+ Disables the default direct mapping of the flash.
+
+ On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems
+ with JFFS2 usage, as the local bus (LPB) doesn't support unaligned
+ accesses as implemented in the JFFS2 code via memcpy(). By defining
+ "no-unaligned-direct-access", the flash will not be exposed directly to
+ the MTD users (e.g. JFFS2) any more.
+
+ linux,mtd-name:
+ description:
+ Allows specifying the mtd name for retro capability with physmap-flash
+ drivers as boot loader pass the mtd partition via the old device name
+ physmap-flash.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ use-advanced-sector-protection:
+ type: boolean
+ description: |
+ Enables support for the advanced sector protection (Spansion: PPB -
+ Persistent Protection Bits) locking.
+
+ erase-size:
+ description: The chip's physical erase block size in bytes.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ addr-gpios:
+ description:
+ List of GPIO descriptors that will be used to address the MSBs address
+ lines. The order goes from LSB to MSB.
+ minItems: 1
+ maxItems: 8
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ big-endian: true
+ little-endian: true
+
+patternProperties:
+ '@[0-9a-f]+$':
+ $ref: partitions/partition.yaml
+
+required:
+ - compatible
+ - reg
+
+# FIXME: A parent bus may define timing properties
+additionalProperties: true
+
+examples:
+ - |
+
+ flash@...00000 {
+ compatible = "cfi-flash";
+ reg = <0xff000000 0x01000000>;
+ bank-width = <4>;
+ device-width = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff000000 0x01000000>;
+
+ fs@0 {
+ label = "fs";
+ reg = <0 0xf80000>;
+ };
+ firmware@...000 {
+ label ="firmware";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+ };
+
+ - |
+ /* An example with multiple "reg" tuples */
+
+ flash@0 {
+ compatible = "intel,PC28F640P30T85", "cfi-flash";
+ reg = <0x00000000 0x02000000>,
+ <0x02000000 0x02000000>;
+ bank-width = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000>;
+
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
+
+ - |
+ /* An example using SRAM */
+ bus {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ sram@2,0 {
+ compatible = "mtd-ram";
+ reg = <2 0 0x00200000>;
+ bank-width = <2>;
+ };
+ };
+
+ - |
+ /* An example using addr-gpios */
+ #include <dt-bindings/gpio/gpio.h>
+
+ flash@...00000 {
+ compatible = "cfi-flash";
+ reg = <0x20000000 0x02000000>;
+ bank-width = <2>;
+ addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0x02000000>,
+ <1 0x02000000 0x02000000>;
+
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
+...
--
2.27.0
Powered by blists - more mailing lists