| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <9900bbbbd55ad107bf3d94c82aa879cfe84f8a73.1623167569.git.sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Tue, 8 Jun 2021 08:59:24 -0700
From: Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>
To: Peter Zijlstra <peterz@...radead.org>,
Andy Lutomirski <luto@...nel.org>,
Dave Hansen <dave.hansen@...el.com>,
Tony Luck <tony.luck@...el.com>,
Dan Williams <dan.j.williams@...el.com>
Cc: Andi Kleen <ak@...ux.intel.com>,
Kirill Shutemov <kirill.shutemov@...ux.intel.com>,
Kuppuswamy Sathyanarayanan <knsathya@...nel.org>,
Raj Ashok <ashok.raj@...el.com>,
Sean Christopherson <seanjc@...gle.com>,
linux-kernel@...r.kernel.org,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>
Subject: [RFC v2-fix-v3 4/4] x86/tdx: Handle in-kernel MMIO
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
In traditional VMs, MMIO is usually implemented by giving a
guest access to a mapping which will cause a VMEXIT on access
and then the VMM emulating the access. That's not possible in
TDX guest because VMEXIT will expose the register state to the
host. TDX guests don't trust the host and can't have its state
exposed to the host. In TDX the MMIO regions are instead
configured to trigger a #VE exception in the guest. The guest #VE
handler then emulates the MMIO instruction inside the guest and
converts them into a controlled TDCALL to the host, rather than
completely exposing the state to the host.
Currently, we only support MMIO for instructions that are known
to come from io.h macros (build_mmio_read/write()). For drivers
that don't use the io.h macros or uses structure overlay to do
MMIO are currently not supported in TDX guest (for example the
MMIO based XAPIC is disable at runtime for TDX).
This way of handling is similar to AMD SEV.
Also, reasons for supporting #VE based MMIO in TDX guest are,
* MMIO is widely used and we'll have more drivers in the future.
* We don't want to annotate every TDX specific MMIO readl/writel etc.
* If we didn't annotate we would need to add an alternative to every
MMIO access in the kernel (even though 99.9% will never be used on
TDX) which would be a complete waste and incredible binary bloat
for nothing.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
---
arch/x86/kernel/tdx.c | 109 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
index 48a0cc2663ea..053e69782e3d 100644
--- a/arch/x86/kernel/tdx.c
+++ b/arch/x86/kernel/tdx.c
@@ -5,6 +5,9 @@
#include <asm/tdx.h>
#include <asm/vmx.h>
+#include <asm/insn.h>
+#include <asm/insn-eval.h>
+#include <linux/sched/signal.h> /* force_sig_fault() */
#include <linux/cpu.h>
#include <linux/protected_guest.h>
@@ -226,6 +229,104 @@ static void tdg_handle_io(struct pt_regs *regs, u32 exit_qual)
}
}
+static unsigned long tdg_mmio(int size, bool write, unsigned long addr,
+ unsigned long *val)
+{
+ struct tdx_hypercall_output out = {0};
+ u64 err;
+
+ err = __tdx_hypercall(EXIT_REASON_EPT_VIOLATION, size, write,
+ addr, *val, &out);
+ *val = out.r11;
+ return err;
+}
+
+static int tdg_handle_mmio(struct pt_regs *regs, struct ve_info *ve)
+{
+ struct insn insn = {};
+ char buffer[MAX_INSN_SIZE];
+ enum mmio_type mmio;
+ unsigned long *reg;
+ int size, ret;
+ u8 sign_byte;
+ unsigned long val;
+
+ if (user_mode(regs)) {
+ ret = insn_fetch_from_user(regs, buffer);
+ if (!ret)
+ return -EFAULT;
+ if (!insn_decode_from_regs(&insn, regs, buffer, ret))
+ return -EFAULT;
+ } else {
+ ret = copy_from_kernel_nofault(buffer, (void *)regs->ip,
+ MAX_INSN_SIZE);
+ if (ret)
+ return -EFAULT;
+ insn_init(&insn, buffer, MAX_INSN_SIZE, 1);
+ insn_get_length(&insn);
+ }
+
+ mmio = insn_decode_mmio(&insn, &size);
+ if (mmio == MMIO_DECODE_FAILED)
+ return -EFAULT;
+
+ if (mmio != MMIO_WRITE_IMM && mmio != MMIO_MOVS) {
+ reg = insn_get_modrm_reg_ptr(&insn, regs);
+ if (!reg)
+ return -EFAULT;
+ }
+
+ switch (mmio) {
+ case MMIO_WRITE:
+ memcpy(&val, reg, size);
+ ret = tdg_mmio(size, true, ve->gpa, &val);
+ break;
+ case MMIO_WRITE_IMM:
+ val = insn.immediate.value;
+ ret = tdg_mmio(size, true, ve->gpa, &val);
+ break;
+ case MMIO_READ:
+ ret = tdg_mmio(size, false, ve->gpa, &val);
+ if (ret)
+ break;
+ /* Zero-extend for 32-bit operation */
+ if (size == 4)
+ *reg = 0;
+ memcpy(reg, &val, size);
+ break;
+ case MMIO_READ_ZERO_EXTEND:
+ ret = tdg_mmio(size, false, ve->gpa, &val);
+ if (ret)
+ break;
+
+ /* Zero extend based on operand size */
+ memset(reg, 0, insn.opnd_bytes);
+ memcpy(reg, &val, size);
+ break;
+ case MMIO_READ_SIGN_EXTEND:
+ ret = tdg_mmio(size, false, ve->gpa, &val);
+ if (ret)
+ break;
+
+ if (size == 1)
+ sign_byte = (val & 0x80) ? 0xff : 0x00;
+ else
+ sign_byte = (val & 0x8000) ? 0xff : 0x00;
+
+ /* Sign extend based on operand size */
+ memset(reg, sign_byte, insn.opnd_bytes);
+ memcpy(reg, &val, size);
+ break;
+ case MMIO_MOVS:
+ case MMIO_DECODE_FAILED:
+ return -EFAULT;
+ }
+
+ if (ret)
+ return -EFAULT;
+ return insn.length;
+}
+
unsigned long tdg_get_ve_info(struct ve_info *ve)
{
u64 ret;
@@ -275,6 +376,14 @@ int tdg_handle_virtualization_exception(struct pt_regs *regs,
case EXIT_REASON_IO_INSTRUCTION:
tdg_handle_io(regs, ve->exit_qual);
break;
+ case EXIT_REASON_EPT_VIOLATION:
+ /* Currently only MMIO triggers EPT violation */
+ ve->instr_len = tdg_handle_mmio(regs, ve);
+ if (ve->instr_len < 0) {
+ pr_warn_once("MMIO failed\n");
+ return -EFAULT;
+ }
+ break;
default:
pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
return -EFAULT;
--
2.25.1
Powered by blists - more mailing lists