linux-kernel - [PATCH 5.10 100/137] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210608175945.770367479@linuxfoundation.org>
Date:   Tue,  8 Jun 2021 20:27:20 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Michal Vokáč <michal.vokac@...ft.com>,
        Andrew Lunn <andrew@...n.ch>, Shawn Guo <shawnguo@...nel.org>
Subject: [PATCH 5.10 100/137] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch

From: Michal Vokáč <michal.vokac@...ft.com>

commit 0e4a4a08cd78efcaddbc2e4c5ed86b5a5cb8a15e upstream.

The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.

This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.

Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@...r.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -105,9 +105,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;