[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210608223513.23193-9-jonathan@marek.ca>
Date: Tue, 8 Jun 2021 18:34:57 -0400
From: Jonathan Marek <jonathan@...ek.ca>
To: linux-arm-msm@...r.kernel.org
Cc: robert.foss@...aro.org, andrey.konovalov@...aro.org,
Todor Tomov <todor.too@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
linux-media@...r.kernel.org (open list:QUALCOMM CAMERA SUBSYSTEM DRIVER),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 08/17] media: camss: csid-170: set the right HALT_CMD when disabled
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
Reviewed-by: Robert Foss <robert.foss@...aro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index 2c84d40fe3e04..22a7d7ad63403 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -105,7 +105,8 @@
#define CSID_RDI_CTRL(rdi) ((IS_LITE ? 0x208 : 0x308)\
+ 0x100 * (rdi))
#define RDI_CTRL_HALT_CMD 0
-#define ALT_CMD_RESUME_AT_FRAME_BOUNDARY 1
+#define HALT_CMD_HALT_AT_FRAME_BOUNDARY 0
+#define HALT_CMD_RESUME_AT_FRAME_BOUNDARY 1
#define RDI_CTRL_HALT_MODE 2
#define CSID_RDI_FRM_DROP_PATTERN(rdi) ((IS_LITE ? 0x20C : 0x30C)\
@@ -444,7 +445,10 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= 1 << CSI2_RX_CFG1_MISR_EN;
writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
- val = 1 << RDI_CTRL_HALT_CMD;
+ if (enable)
+ val = HALT_CMD_RESUME_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
+ else
+ val = HALT_CMD_HALT_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
}
--
2.26.1
Powered by blists - more mailing lists