[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e9bfbc6421d2092b652dd2bb466aed54d72809b3.camel@puri.sm>
Date: Tue, 08 Jun 2021 09:00:28 +0200
From: Martin Kepplinger <martin.kepplinger@...i.sm>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: krzysztof.kozlowski@...onical.com, mchehab@...nel.org,
paul.kocialkowski@...tlin.com, pavel@....cz,
devicetree@...r.kernel.org, kernel@...i.sm,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
phone-devel@...r.kernel.org, robh@...nel.org, shawnx.tu@...el.com
Subject: Re: [PATCH v4 2/5] dt-bindings: media: document SK Hynix Hi-846
MIPI CSI-2 8M pixel sensor
Am Dienstag, dem 08.06.2021 um 00:15 +0300 schrieb Laurent Pinchart:
> Hi Martin
>
> Thank you for the patch.
>
> On Mon, Jun 07, 2021 at 12:52:10PM +0200, Martin Kepplinger wrote:
> > Document the bindings used for the SK Hynix Hi-846 CMOS camera
> > driver.
> >
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@...i.sm>
> > ---
> > .../bindings/media/i2c/hynix,hi846.yaml | 105
> > ++++++++++++++++++
> > 1 file changed, 105 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > new file mode 100644
> > index 000000000000..19825392fb1f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > @@ -0,0 +1,105 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> > +
> > +maintainers:
> > + - Martin Kepplinger <martin.kepplinger@...i.sm>
> > +
> > +description: |-
> > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> > + interface and CCI (I2C compatible) control bus. The output
> > format
> > + is raw Bayer.
> > +
> > +properties:
> > + compatible:
> > + const: hynix,hi846
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Reference to the mclk clock.
> > +
> > + reset-gpios:
> > + description: Reference to the GPIO connected to the RESETB
> > pin. Active low.
> > + maxItems: 1
> > +
> > + shutdown-gpios:
> > + description: Reference to the GPIO connected to the XSHUTDOWN
> > pin. Active low.
> > + maxItems: 1
> > +
> > + vddi-supply:
>
> I think it's called vddio (seems to be a typo on page 8).
>
> > + description: Definition of the regulator used for the 1.8V or
> > 2.8V I/O power supply.
>
> You could just say "... for the VDDIO supply". Same below. Up to you.
>
> With the name fixed and the description optionally updated,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>
> Please add my tag if you post a new version.
I'll rename the binding and add the tag. I haven't added your previous
tag because you found improvements based on the DS afterwards.
thanks again!
martin
Powered by blists - more mailing lists