| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 8 Jun 2021 16:12:34 +0800
From: Guangbin Huang <huangguangbin2@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <xie.he.0141@...il.com>,
<ms@....tdt.de>, <willemb@...gle.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<lipeng321@...wei.com>, <huangguangbin2@...wei.com>
Subject: [PATCH net-next 08/16] net: farsync: code indent use tabs where possible
From: Peng Li <lipeng321@...wei.com>
Code indent should use tabs where possible.
Signed-off-by: Peng Li <lipeng321@...wei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@...wei.com>
---
drivers/net/wan/farsync.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 7653ff0..075f50d 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -422,7 +422,7 @@ struct buf_window {
/* Per port (line or channel) information
*/
struct fst_port_info {
- struct net_device *dev; /* Device struct - must be first */
+ struct net_device *dev; /* Device struct - must be first */
struct fst_card_info *card; /* Card we're associated with */
int index; /* Port index on the card */
int hwif; /* Line hardware (lineInterface copy) */
@@ -786,7 +786,7 @@ fst_init_dma(struct fst_card_info *card)
/* This is only required for the PLX 9054
*/
if (card->family == FST_FAMILY_TXU) {
- pci_set_master(card->device);
+ pci_set_master(card->device);
outl(0x00020441, card->pci_conf + DMAMODE0);
outl(0x00020441, card->pci_conf + DMAMODE1);
outl(0x0, card->pci_conf + DMATHR);
@@ -1561,7 +1561,7 @@ fst_intr(int dummy, void *dev_id)
rdidx = 0;
}
FST_WRB(card, interruptEvent.rdindex, rdidx);
- return IRQ_HANDLED;
+ return IRQ_HANDLED;
}
/* Check that the shared memory configuration is one that we can handle
@@ -2129,7 +2129,7 @@ fst_open(struct net_device *dev)
port = dev_to_port(dev);
if (!try_module_get(THIS_MODULE))
- return -EBUSY;
+ return -EBUSY;
if (port->mode != FST_RAW) {
err = hdlc_open(dev);
@@ -2421,9 +2421,9 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
(ent->driver_data == FST_TYPE_T2U)) ? 2 : 4;
card->state = FST_UNINIT;
- spin_lock_init ( &card->card_lock );
+ spin_lock_init(&card->card_lock);
- for ( i = 0 ; i < card->nports ; i++ ) {
+ for (i = 0; i < card->nports; i++) {
struct net_device *dev = alloc_hdlcdev(&card->ports[i]);
hdlc_device *hdlc;
@@ -2435,29 +2435,29 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto hdlcdev_fail;
}
card->ports[i].dev = dev;
- card->ports[i].card = card;
- card->ports[i].index = i;
- card->ports[i].run = 0;
+ card->ports[i].card = card;
+ card->ports[i].index = i;
+ card->ports[i].run = 0;
hdlc = dev_to_hdlc(dev);
- /* Fill in the net device info */
+ /* Fill in the net device info */
/* Since this is a PCI setup this is purely
* informational. Give them the buffer addresses
* and basic card I/O.
*/
- dev->mem_start = card->phys_mem
- + BUF_OFFSET ( txBuffer[i][0][0]);
- dev->mem_end = card->phys_mem
- + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]);
- dev->base_addr = card->pci_conf;
- dev->irq = card->irq;
+ dev->mem_start = card->phys_mem
+ + BUF_OFFSET(txBuffer[i][0][0]);
+ dev->mem_end = card->phys_mem
+ + BUF_OFFSET(txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]);
+ dev->base_addr = card->pci_conf;
+ dev->irq = card->irq;
dev->netdev_ops = &fst_ops;
dev->tx_queue_len = FST_TX_QUEUE_LEN;
dev->watchdog_timeo = FST_TX_TIMEOUT;
- hdlc->attach = fst_attach;
- hdlc->xmit = fst_start_xmit;
+ hdlc->attach = fst_attach;
+ hdlc->xmit = fst_start_xmit;
}
card->device = pdev;
--
2.8.1
Powered by blists - more mailing lists