[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210608102547.4880-3-steven_lee@aspeedtech.com>
Date: Tue, 8 Jun 2021 18:25:37 +0800
From: Steven Lee <steven_lee@...eedtech.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@...ts.ozlabs.org>,
open list <linux-kernel@...r.kernel.org>
CC: <steven_lee@...eedtech.com>, <Hongweiz@....com>,
<ryan_chen@...eedtech.com>, <billy_tsai@...eedtech.com>
Subject: [PATCH v5 02/10] dt-bindings: aspeed-sgpio: Add ast2600 sgpio compatibles.
AST2600 SoC has 2 SGPIO master interfaces one with 128 pins another one
with 80 pins. Add ast2600-sgpiom0-80 and ast2600-sgpiom-128 compatibles
and update descriptions to introduce the max number of available gpio
pins that AST2600 supported.
Signed-off-by: Steven Lee <steven_lee@...eedtech.com>
Reviewed-by: Andrew Jeffery <andrew@...id.au>
---
Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
index b2ae211411ff..0e42eded3c1e 100644
--- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -10,9 +10,10 @@ maintainers:
- Andrew Jeffery <andrew@...id.au>
description:
- This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
- featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
- support the following options
+ This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+ AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+ AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+ GPIO pins can be programmed to support the following options
- Support interrupt option for each input port and various interrupt
sensitivity option (level-high, level-low, edge-high, edge-low)
- Support reset tolerance option for each output port
@@ -25,6 +26,8 @@ properties:
enum:
- aspeed,ast2400-sgpio
- aspeed,ast2500-sgpio
+ - aspeed,ast2600-sgpiom-80
+ - aspeed,ast2600-sgpiom-128
reg:
maxItems: 1
--
2.17.1
Powered by blists - more mailing lists