Message-ID: <ed54920a-e063-4e32-11c0-ca72aeab9ab8@arm.com>
Date:   Tue, 8 Jun 2021 17:28:28 +0300
From:   James Clark <james.clark@....com>
To:     Leo Yan <leo.yan@...aro.org>
Cc:     acme@...nel.org, mathieu.poirier@...aro.org,
        coresight@...ts.linaro.org, al.grant@....com,
        branislav.rankov@....com, denik@...omium.org,
        suzuki.poulose@....com, anshuman.khandual@....com,
        Mike Leach <mike.leach@...aro.org>,
        John Garry <john.garry@...wei.com>,
        Will Deacon <will@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
        Jiri Olsa <jolsa@...hat.com>,
        Namhyung Kim <namhyung@...nel.org>,
        linux-arm-kernel@...ts.infradead.org,
        linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH v4 1/1] perf cs-etm: Split Coresight decode by aux
 records



On 04/06/2021 08:21, Leo Yan wrote:
> Hi James,
> 
> On Tue, Jun 01, 2021 at 04:07:51PM +0300, James Clark wrote:
>> Populate the auxtrace queues using AUX records rather than whole
>> auxtrace buffers.
>>
>> This is similar to the auxtrace_queues__process_index() ->
>> auxtrace_queues__add_indexed_event() flow where
>> perf_session__peek_event() is used to read AUXTRACE events out of random
>> positions in the file based on the auxtrace index.
>>
>> Now there is a second pass using perf_session__peek_events() which loops
>> over all PERF_RECORD_AUX events, finds the corresponding auxtrace
>> buffer, and adds a fragment of that buffer to the auxtrace queues,
>> rather than the whole buffer.
>>
>> This is a completely new implementation compared to v1 and v2 of the
>> patchset where significant modifications were made to the decoding flow,
>> including saving all of the AUX records, and changing the point where
>> decoding started. These changes had effects on the outcome of decoding,
>> but with this implementation, the output of decoding is identical to
>> perf/core, except in the case where decoding failed due to the issue
>> that this change addresses. No changes to decoding were made, apart
>> from populating the auxtrace queues.
> 
> IMHO, this patch is much better than previous versions! :)
> 
> When went through the whole patch, the most code actually is general
> enough and can consider to place into into util/auxtrace.c.  If there
> have any objection, we can come back to add the code for only cs-etm
> specific.
> 
>> Because the decoder is already reset between each auxtrace buffer,
>> populating the queues with fragments of whole buffers based on AUX
>> records has the same affect as resetting the decoder on the AUX record
>> bounds during decode. But this approach only requires a change to one
>> part of the whole flow, rather than many parts.
>>
>> There is still one TODO about how buffers are found. Currently there is
>> a plain loop as a search, but this could be improved with a binary
>> search or keeping a record of which buffers have already been added and
>> starting the search from the last used place. AUX records and buffers
>> will come in similar orders in the file so the latter would be simpler
>> and probably be good enough. But I'm looking for feedback about the
>> approach as a whole before ironing out all of the details.
>>
>> Other issues that were fixed by the previous patchsets such as fixing
>> the case where the first aux record comes before the first MMAP record
>> can now be fixed as completely independent issues.
>>
>> Testing
>> =======
>>
>> Testing was done with the following script, to diff the decoding results
>> between the patched and un-patched versions of perf:
>>
>> 	#!/bin/bash
>> 	set -ex
>>
>> 	$1 script -i $3 $4 > split.script
>> 	$2 script -i $3 $4 > default.script
>>
>> 	diff split.script default.script | head -n 20
>>
>> And it was run like this, with various itrace options depending on the
>> quantity of synthesised events:
>>
>> 	compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns
>>
>> No changes in output were observed in the following scenarios:
>>
>> * Simple per-cpu
>> 	perf record -e cs_etm/@..._etr0/u top
>>
>> * Per-thread, single thread
>> 	perf record -e cs_etm/@..._etr0/u --per-thread ./threads_C
>>
>> * Per-thread multiple threads (but only one thread collected data):
>> 	perf record -e cs_etm/@..._etr0/u --per-thread --pid 4596,4597
>>
>> * Per-thread multiple threads (both threads collected data):
>> 	perf record -e cs_etm/@..._etr0/u --per-thread --pid 4596,4597
>>
>> * Per-cpu explicit threads:
>> 	perf record -e cs_etm/@..._etr0/u --pid 853,854
>>
>> * System-wide (per-cpu):
>>     perf record -e cs_etm/@..._etr0/u -a
>>
>> * No data collected (no aux buffers)
>> 	Can happen with any command when run for a short period
>>
>> * Containing truncated records
>> 	Can happen with any command
>>
>> * Containing aux records with 0 size
>> 	Can happen with any command
>>
>> * Snapshot mode
>> 	perf record -e cs_etm/@..._etr0/u -a --snapshot
>>
>> Signed-off-by: James Clark <james.clark@....com>
>> ---
>>  tools/perf/util/cs-etm.c | 159 ++++++++++++++++++++++++++++++++++++++-
>>  1 file changed, 156 insertions(+), 3 deletions(-)
>>
>> diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
>> index 64536a6ed10a..053aad4b28cf 100644
>> --- a/tools/perf/util/cs-etm.c
>> +++ b/tools/perf/util/cs-etm.c
>> @@ -2679,6 +2679,161 @@ static u64 *cs_etm__create_meta_blk(u64 *buff_in, int *buff_in_offset,
>>  	return metadata;
>>  }
>>  
>> +/**
>> + * Puts a fragment of an auxtrace buffer into the auxtrace queues based
>> + * on the bounds of aux_event, if it matches with the buffer that's at
>> + * file_offset.
>> + *
>> + * Normally, whole auxtrace buffers would be added to the queue. But we
>> + * want to reset the decoder for every PERF_RECORD_AUX event, and the decoder
>> + * is reset across each buffer, so splitting the buffers up in advance has
>> + * the same effect.
>> + */
>> +static int cs_etm__queue_aux_fragment(struct perf_session *session,
>> +						off_t file_offset, size_t sz,
>> +						struct perf_record_aux *aux_event,
>> +						struct perf_sample *sample)
>> +{
>> +	int err;
>> +	char buf[PERF_SAMPLE_MAX_SIZE];
>> +	union perf_event *auxtrace_event_union;
>> +	struct perf_record_auxtrace *auxtrace_event;
>> +	union perf_event auxtrace_fragment;
>> +	bool matchesCpuPid;
> 
> It's better to avoid using camel naming.
> 
>> +	__u64 aux_offset;
>> +	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
>> +						   struct cs_etm_auxtrace,
>> +						   auxtrace);
>> +
>> +	/*
>> +	 * There should be a PERF_RECORD_AUXTRACE event at the file_offset that we got
>> +	 * from looping through the auxtrace index.
>> +	 */
>> +	err = perf_session__peek_event(session, file_offset, buf,
>> +				       PERF_SAMPLE_MAX_SIZE, &auxtrace_event_union, NULL);
>> +	if (err)
>> +		return err;
>> +	auxtrace_event = &auxtrace_event_union->auxtrace;
>> +	if (auxtrace_event->header.type != PERF_RECORD_AUXTRACE)
>> +		return -EINVAL;
>> +
>> +	if (auxtrace_event->header.size < sizeof(struct perf_record_auxtrace) ||
>> +		auxtrace_event->header.size != sz) {
>> +		return -EINVAL;
>> +	}
>> +
>> +	/*
>> +	 * In per-thread mode, CPU is set to -1, but TID will be set instead.
>> +	 * See auxtrace_mmap_params__set_idx()
>> +	 */
>> +	if (auxtrace_event->cpu == (__u32) -1)
>> +		matchesCpuPid = auxtrace_event->tid == sample->tid;
>> +	else
>> +		matchesCpuPid = auxtrace_event->cpu == sample->cpu;
> 
> If "matchesCpuPid" is false, can directly bail out at here, so can
> avoid the below unnecessary calculations.
> 
>> +
>> +	/*
>> +	 * In snapshot/overwrite mode, the head points to the end of the buffer so aux_offset needs
>> +	 * to have the size subtracted so it points to the beginning as in normal mode.
>> +	 */
>> +	if (aux_event->flags & PERF_AUX_FLAG_OVERWRITE)
>> +		aux_offset = aux_event->aux_offset - aux_event->aux_size;
>> +	else
>> +		aux_offset = aux_event->aux_offset;
>> +
>> +	if (matchesCpuPid &&
>> +	    aux_offset >= auxtrace_event->offset &&
>> +	    aux_offset + aux_event->aux_size <= auxtrace_event->offset + auxtrace_event->size) {
> 
> It's possible that an event PERF_RECORD_AUXTRACE saves AUX trace data
> for multiple events PERF_RECORD_AUX (if we consider watermark).
> 
> So here the logic makes sense for me for checking the buffer range and
> I don't find any issue.
> 
>> +		/*
>> +		 * If this AUX event was inside this buffer somewhere, create a new auxtrace event
>> +		 * based on the sizes of the aux event, and queue that fragment.
>> +		 */
>> +		auxtrace_fragment.auxtrace = *auxtrace_event;
>> +		auxtrace_fragment.auxtrace.size = aux_event->aux_size;
>> +		auxtrace_fragment.auxtrace.offset = aux_offset;
>> +		file_offset += aux_offset - auxtrace_event->offset + auxtrace_event->header.size;
>> +		return auxtrace_queues__add_event(&etm->queues,
>> +					       session,
>> +					       &auxtrace_fragment,
>> +					       file_offset,
>> +					       NULL);
>> +	}
>> +
>> +	/* Wasn't inside this buffer, but there were no parse errors. 1 == 'not found' */
>> +	return 1;
>> +}
>> +
>> +static int cs_etm__queue_aux_records_cb(struct perf_session *session,
>> +			     union perf_event *event, u64 offset __maybe_unused,
>> +			     void *data __maybe_unused)
>> +{
>> +	struct perf_sample sample;
>> +	int ret;
>> +	struct auxtrace_index_entry *ent;
>> +	struct auxtrace_index *auxtrace_index;
>> +	struct evsel *evsel;
>> +	size_t i;
>> +	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
>> +						   struct cs_etm_auxtrace,
>> +						   auxtrace);
>> +
>> +	/* Don't care about any other events, we're only queuing buffers for AUX events */
>> +	if (event->header.type != PERF_RECORD_AUX)
>> +		return 0;
>> +
>> +	if (event->header.size < sizeof(struct perf_record_aux))
>> +		return -EINVAL;
>> +
>> +	/* Truncated Aux records can have 0 size and shouldn't result in anything being queued. */
>> +	if (!event->aux.aux_size)
>> +		return 0;
>> +
>> +	/*
>> +	 * Parse the sample, we need the sample_id_all data that comes after the event so that the
>> +	 * CPU or PID can be matched to an AUXTRACE buffer's CPU or PID.
>> +	 */
>> +	evsel = evlist__event2evsel(session->evlist, event);
>> +	evsel__parse_sample(evsel, event, &sample);
> 
> It's good to check the return errors from evsel__parse_sample().
> 
>> +
>> +	/*
>> +	 * Loop throuch the auxtrace index to find the buffer that matches up with this
>> +	 * aux event.
>> +	 * TODO: binary search?
> 
> For binary search, you might need to reorg the auxtrace_index and
> its entries, I personally think this is not the priority.

I've also thought about this, and because in general there are so few
AUXTRACE buffers compared to AUX records that I also think the loop is
fine. And Mathieu agrees in his other message.

> 
>> +	 */
>> +	list_for_each_entry(auxtrace_index, &session->auxtrace_index, list) {
>> +		for (i = 0; i < auxtrace_index->nr; i++) {
>> +			ent = &auxtrace_index->entries[i];
>> +			ret = cs_etm__queue_aux_fragment(session, ent->file_offset,
>> +							 ent->sz, &event->aux, &sample);
>> +			if (!ret) {
>> +				etm->data_queued = true;
>> +				return 0;
>> +			} else if (ret < 0) {
>> +				/*
>> +				 * Anything other than 1 is an error. Positive values are 'not
>> +				 * found' we just want to go onto the next one in that case.
>> +				 */
>> +				return ret;
>> +			}
>> +		}
>> +	}
> 
> It's good to add a warning at here?  If cannot find a matched
> AUXRECORD event and fails to queue the fragment, it's likely caused by
> the AUX ring buffer's overrun.
> 

I agree with all of your comments and I will make the changes for v5.

For this one I can add a warning if I move the check for no index entries earlier and
keep that as the silent failure.

James

>> +
>> +	/*
>> +	 * We would get here if there are no entries in the index (either no auxtrace buffers or
>> +	 * no index). Fail silently as there is the possibility of queueing them in
>> +	 * cs_etm__process_auxtrace_event() if etm->data_queued is still false;
>> +	 *
>> +	 * In that scenario, buffers will not be split by AUX records.
>> +	 */
>> +	return 0;
>> +}
>> +
>> +static int cs_etm__queue_aux_records(struct perf_session *session)
>> +{
>> +	return perf_session__peek_events(session, session->header.data_offset,
>> +					 session->header.data_size,
>> +					 cs_etm__queue_aux_records_cb, NULL);
>> +}
>> +
>>  int cs_etm__process_auxtrace_info(union perf_event *event,
>>  				  struct perf_session *session)
>>  {
>> @@ -2879,12 +3034,10 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
>>  	if (err)
>>  		goto err_delete_thread;
>>  
>> -	err = auxtrace_queues__process_index(&etm->queues, session);
>> +	err = cs_etm__queue_aux_records(session);
>>  	if (err)
>>  		goto err_delete_thread;
>>  
>> -	etm->data_queued = etm->queues.populated;
> 
> Seems to me it's no reason to remove this sentence.
> 
> "etm->queues.populated" will be set when call
> auxtrace_queues__add_event(), so we still can assign it to
> "etm->data_queued" at here.
> 
> Thanks,
> Leo
> 
>> -
>>  	return 0;
>>  
>>  err_delete_thread:
>> -- 
>> 2.28.0
>>

Powered by blists - more mailing lists