[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e53458a9-e5f6-6507-f95c-2406b47b5576@ti.com>
Date: Wed, 9 Jun 2021 19:59:14 +0530
From: Lokesh Vutla <lokeshvutla@...com>
To: Aswath Govindraju <a-govindraju@...com>
CC: Vignesh Raghavendra <vigneshr@...com>, Suman Anna <s-anna@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ti: k3-am64-main: Update the location of
ATF in SRAM and increase its max size
On 07/06/21 7:08 pm, Aswath Govindraju wrote:
> Due to a limitation for USB DFU boot mode, SPL load address has to be less
> than or equal to 0x70001000. So, load address of SPL and ATF have been
> moved to 0x70000000 and 0x701a0000 respectively.
>
> Also, the maximum size of ATF has been increased to 0x1c000 [1].
>
> Therefore, update ATF's location and maximum size accordingly in the device
> tree file.
>
> [1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=2fb5312f61a7de8b7a70e1639199c4f14a10b6f9
>
> Signed-off-by: Aswath Govindraju <a-govindraju@...com>
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index ca59d1f711f8..fcd12b6f10f6 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -13,8 +13,8 @@
> #size-cells = <1>;
> ranges = <0x0 0x00 0x70000000 0x200000>;
>
> - atf-sram@0 {
> - reg = <0x0 0x1a000>;
> + atf-sram@...000 {
> + reg = <0x1a0000 0x1c000>;
After thinking a bot more, isn't size be 0x20000?
ATF is allocated with 125KB no? no point keeping the ~3 as hole IMO.
Thanks and regards,
Lokesh
> };
> };
>
>
Powered by blists - more mailing lists