| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210609184531.GA19297@wintermute.localdomain>
Date: Wed, 9 Jun 2021 13:45:31 -0500
From: Chris Morgan <macroalpha82@...il.com>
To: Jon Lin <jon.lin@...k-chips.com>
Cc: linux-spi@...r.kernel.org, broonie@...nel.org, robh+dt@...nel.org,
heiko@...ech.de, jbx6244@...il.com, hjc@...k-chips.com,
yifeng.zhao@...k-chips.com, sugar.zhang@...k-chips.com,
linux-rockchip@...ts.infradead.org, linux-mtd@...ts.infradead.org,
p.yadav@...com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
mturquette@...libre.com, sboyd@...nel.org,
linux-clk@...r.kernel.org, Chris Morgan <macromorgan@...mail.com>
Subject: Re: [PATCH v7 2/9] spi: rockchip-sfc: add rockchip serial flash
controller
On Wed, Jun 09, 2021 at 10:04:05PM +0800, Jon Lin wrote:
> From: Chris Morgan <macromorgan@...mail.com>
>
> Add the rockchip serial flash controller (SFC) driver.
>
> Signed-off-by: Chris Morgan <macromorgan@...mail.com>
> Signed-off-by: Jon Lin <jon.lin@...k-chips.com>
> ---
Getting failures again intermittently in v7 now when writing
the random file to offset 0xc00000 using the mtdblock subsystem
or using flashrom.
Full log with debugging enabled here for MTD Block:
https://gist.github.com/macromorgan/4f54d9188bfbfd8d5e5e199f8a8abe87
Full log with debugging enabled here for Flashrom:
https://gist.github.com/macromorgan/2af35cd3716649a687ccf44aa2091a47
I might be thinking of a red herring or something, but do you think
this could have anything to do with the fact that switching to the
spi-mem framework (instead of constructing our own op struct like
before) would have anything to do with this? More specifically, the
len field used to be bits, didn't it, but now it's bytes?
I'll play around with that. For now though this is still not working
on my V3 SFC hardware.
Thank you.
>
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> Changes in v1: None
>
> drivers/spi/Kconfig | 9 +
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-rockchip-sfc.c | 676 +++++++++++++++++++++++++++++++++
> 3 files changed, 686 insertions(+)
> create mode 100644 drivers/spi/spi-rockchip-sfc.c
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index e71a4c514f7b..d89e5f3c9107 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -658,6 +658,15 @@ config SPI_ROCKCHIP
> The main usecase of this controller is to use spi flash as boot
> device.
>
> +config SPI_ROCKCHIP_SFC
> + tristate "Rockchip Serial Flash Controller (SFC)"
> + depends on ARCH_ROCKCHIP || COMPILE_TEST
> + depends on HAS_IOMEM && HAS_DMA
> + help
> + This enables support for Rockchip serial flash controller. This
> + is a specialized controller used to access SPI flash on some
> + Rockchip SOCs.
> +
> config SPI_RB4XX
> tristate "Mikrotik RB4XX SPI master"
> depends on SPI_MASTER && ATH79
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 13e54c45e9df..699db95c8441 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
> obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
> obj-$(CONFIG_SPI_QUP) += spi-qup.o
> obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
> +obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
> obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
> obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
> obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
> diff --git a/drivers/spi/spi-rockchip-sfc.c b/drivers/spi/spi-rockchip-sfc.c
> new file mode 100644
> index 000000000000..be2557c9af40
> --- /dev/null
> +++ b/drivers/spi/spi-rockchip-sfc.c
> @@ -0,0 +1,676 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Rockchip Serial Flash Controller Driver
> + *
> + * Copyright (c) 2017-2021, Rockchip Inc.
> + * Author: Shawn Lin <shawn.lin@...k-chips.com>
> + * Chris Morgan <macroalpha82@...il.com>
> + * Jon Lin <Jon.lin@...k-chips.com>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/iopoll.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/spi/spi-mem.h>
> +
> +/* System control */
> +#define SFC_CTRL 0x0
> +#define SFC_CTRL_PHASE_SEL_NEGETIVE BIT(1)
> +#define SFC_CTRL_CMD_BITS_SHIFT 8
> +#define SFC_CTRL_ADDR_BITS_SHIFT 10
> +#define SFC_CTRL_DATA_BITS_SHIFT 12
> +
> +/* Interrupt mask */
> +#define SFC_IMR 0x4
> +#define SFC_IMR_RX_FULL BIT(0)
> +#define SFC_IMR_RX_UFLOW BIT(1)
> +#define SFC_IMR_TX_OFLOW BIT(2)
> +#define SFC_IMR_TX_EMPTY BIT(3)
> +#define SFC_IMR_TRAN_FINISH BIT(4)
> +#define SFC_IMR_BUS_ERR BIT(5)
> +#define SFC_IMR_NSPI_ERR BIT(6)
> +#define SFC_IMR_DMA BIT(7)
> +
> +/* Interrupt clear */
> +#define SFC_ICLR 0x8
> +#define SFC_ICLR_RX_FULL BIT(0)
> +#define SFC_ICLR_RX_UFLOW BIT(1)
> +#define SFC_ICLR_TX_OFLOW BIT(2)
> +#define SFC_ICLR_TX_EMPTY BIT(3)
> +#define SFC_ICLR_TRAN_FINISH BIT(4)
> +#define SFC_ICLR_BUS_ERR BIT(5)
> +#define SFC_ICLR_NSPI_ERR BIT(6)
> +#define SFC_ICLR_DMA BIT(7)
> +
> +/* FIFO threshold level */
> +#define SFC_FTLR 0xc
> +#define SFC_FTLR_TX_SHIFT 0
> +#define SFC_FTLR_TX_MASK 0x1f
> +#define SFC_FTLR_RX_SHIFT 8
> +#define SFC_FTLR_RX_MASK 0x1f
> +
> +/* Reset FSM and FIFO */
> +#define SFC_RCVR 0x10
> +#define SFC_RCVR_RESET BIT(0)
> +
> +/* Enhanced mode */
> +#define SFC_AX 0x14
> +
> +/* Address Bit number */
> +#define SFC_ABIT 0x18
> +
> +/* Interrupt status */
> +#define SFC_ISR 0x1c
> +#define SFC_ISR_RX_FULL_SHIFT BIT(0)
> +#define SFC_ISR_RX_UFLOW_SHIFT BIT(1)
> +#define SFC_ISR_TX_OFLOW_SHIFT BIT(2)
> +#define SFC_ISR_TX_EMPTY_SHIFT BIT(3)
> +#define SFC_ISR_TX_FINISH_SHIFT BIT(4)
> +#define SFC_ISR_BUS_ERR_SHIFT BIT(5)
> +#define SFC_ISR_NSPI_ERR_SHIFT BIT(6)
> +#define SFC_ISR_DMA_SHIFT BIT(7)
> +
> +/* FIFO status */
> +#define SFC_FSR 0x20
> +#define SFC_FSR_TX_IS_FULL BIT(0)
> +#define SFC_FSR_TX_IS_EMPTY BIT(1)
> +#define SFC_FSR_RX_IS_EMPTY BIT(2)
> +#define SFC_FSR_RX_IS_FULL BIT(3)
> +#define SFC_FSR_TXLV_MASK GENMASK(12, 8)
> +#define SFC_FSR_TXLV_SHIFT 8
> +#define SFC_FSR_RXLV_MASK GENMASK(20, 16)
> +#define SFC_FSR_RXLV_SHIFT 16
> +
> +/* FSM status */
> +#define SFC_SR 0x24
> +#define SFC_SR_IS_IDLE 0x0
> +#define SFC_SR_IS_BUSY 0x1
> +
> +/* Raw interrupt status */
> +#define SFC_RISR 0x28
> +#define SFC_RISR_RX_FULL BIT(0)
> +#define SFC_RISR_RX_UNDERFLOW BIT(1)
> +#define SFC_RISR_TX_OVERFLOW BIT(2)
> +#define SFC_RISR_TX_EMPTY BIT(3)
> +#define SFC_RISR_TRAN_FINISH BIT(4)
> +#define SFC_RISR_BUS_ERR BIT(5)
> +#define SFC_RISR_NSPI_ERR BIT(6)
> +#define SFC_RISR_DMA BIT(7)
> +
> +/* Version */
> +#define SFC_VER 0x2C
> +#define SFC_VER_3 0x3
> +#define SFC_VER_4 0x4
> +#define SFC_VER_5 0x5
> +
> +/* Master trigger */
> +#define SFC_DMA_TRIGGER 0x80
> +
> +/* Src or Dst addr for master */
> +#define SFC_DMA_ADDR 0x84
> +
> +/* Length control register extension 32GB */
> +#define SFC_LEN_CTRL 0x88
> +#define SFC_LEN_CTRL_TRB_SEL 1
> +#define SFC_LEN_EXT 0x8C
> +
> +/* Command */
> +#define SFC_CMD 0x100
> +#define SFC_CMD_IDX_SHIFT 0
> +#define SFC_CMD_DUMMY_SHIFT 8
> +#define SFC_CMD_DIR_SHIFT 12
> +#define SFC_CMD_DIR_RD 0
> +#define SFC_CMD_DIR_WR 1
> +#define SFC_CMD_ADDR_SHIFT 14
> +#define SFC_CMD_ADDR_0BITS 0
> +#define SFC_CMD_ADDR_24BITS 1
> +#define SFC_CMD_ADDR_32BITS 2
> +#define SFC_CMD_ADDR_XBITS 3
> +#define SFC_CMD_TRAN_BYTES_SHIFT 16
> +#define SFC_CMD_CS_SHIFT 30
> +
> +/* Address */
> +#define SFC_ADDR 0x104
> +
> +/* Data */
> +#define SFC_DATA 0x108
> +
> +/* The controller and documentation reports that it supports up to 4 CS
> + * devices (0-3), however I have only been able to test a single CS (CS 0)
> + * due to the configuration of my device.
> + */
> +#define SFC_MAX_CHIPSELECT_NUM 4
> +
> +/* The SFC can transfer max 16KB - 1 at one time
> + * we set it to 15.5KB here for alignment.
> + */
> +#define SFC_MAX_IOSIZE_VER3 (512 * 31)
> +
> +/* DMA is only enabled for large data transmission */
> +#define SFC_DMA_TRANS_THRETHOLD (0x40)
> +
> +/* Maximum clock values from datasheet suggest keeping clock value under
> + * 150MHz. No minimum or average value is suggested, but the U-boot BSP driver
> + * has a minimum of 10MHz and a default of 80MHz which seems reasonable.
> + */
> +#define SFC_MIN_SPEED_HZ (10 * 1000 * 1000)
> +#define SFC_DEFAULT_SPEED_HZ (80 * 1000 * 1000)
> +#define SFC_MAX_SPEED_HZ (150 * 1000 * 1000)
> +
> +struct rockchip_sfc {
> + struct device *dev;
> + void __iomem *regbase;
> + struct clk *hclk;
> + struct clk *clk;
> + u32 frequency;
> + /* virtual mapped addr for dma_buffer */
> + void *buffer;
> + dma_addr_t dma_buffer;
> + struct completion cp;
> + bool use_dma;
> + u32 max_iosize;
> + u16 version;
> +};
> +
> +static int rockchip_sfc_reset(struct rockchip_sfc *sfc)
> +{
> + int err;
> + u32 status;
> +
> + writel_relaxed(SFC_RCVR_RESET, sfc->regbase + SFC_RCVR);
> +
> + err = readl_poll_timeout(sfc->regbase + SFC_RCVR, status,
> + !(status & SFC_RCVR_RESET), 20,
> + jiffies_to_usecs(HZ));
> + if (err)
> + dev_err(sfc->dev, "SFC reset never finished\n");
> +
> + /* Still need to clear the masked interrupt from RISR */
> + writel_relaxed(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
> +
> + dev_dbg(sfc->dev, "reset\n");
> +
> + return err;
> +}
> +
> +static u16 rockchip_sfc_get_version(struct rockchip_sfc *sfc)
> +{
> + return (u16)(readl(sfc->regbase + SFC_VER) & 0xffff);
> +}
> +
> +static u32 rockchip_sfc_get_max_iosize(struct rockchip_sfc *sfc)
> +{
> + return SFC_MAX_IOSIZE_VER3;
> +}
> +
> +static int rockchip_sfc_init(struct rockchip_sfc *sfc)
> +{
> + writel(0, sfc->regbase + SFC_CTRL);
> + if (rockchip_sfc_get_version(sfc) >= SFC_VER_4)
> + writel(SFC_LEN_CTRL_TRB_SEL, sfc->regbase + SFC_LEN_CTRL);
> +
> + return 0;
> +}
> +
> +static inline int rockchip_sfc_get_fifo_level(struct rockchip_sfc *sfc, int wr)
> +{
> + u32 fsr = readl_relaxed(sfc->regbase + SFC_FSR);
> + int level;
> +
> + if (wr)
> + level = (fsr & SFC_FSR_TXLV_MASK) >> SFC_FSR_TXLV_SHIFT;
> + else
> + level = (fsr & SFC_FSR_RXLV_MASK) >> SFC_FSR_RXLV_SHIFT;
> +
> + return level;
> +}
> +
> +static int rockchip_sfc_wait_fifo_ready(struct rockchip_sfc *sfc, int wr, u32 timeout)
> +{
> + unsigned long deadline = jiffies + timeout;
> + int level;
> +
> + while (!(level = rockchip_sfc_get_fifo_level(sfc, wr))) {
> + if (time_after_eq(jiffies, deadline)) {
> + dev_warn(sfc->dev, "%s fifo timeout\n", wr ? "write" : "read");
> + return -ETIMEDOUT;
> + }
> + udelay(1);
> + }
> +
> + return level;
> +}
> +
> +static void rockchip_sfc_adjust_op_work(struct spi_mem_op *op)
> +{
> + if (unlikely(op->dummy.nbytes && !op->addr.nbytes)) {
> + /*
> + * SFC not support output DUMMY cycles right after CMD cycles, so
> + * treat it as ADDR cycles.
> + */
> + op->addr.nbytes = op->dummy.nbytes;
> + op->addr.buswidth = op->dummy.buswidth;
> + op->addr.val = 0xFFFFFFFFF;
> +
> + op->dummy.nbytes = 0;
> + }
> +}
> +
> +static int rockchip_sfc_xfer_setup(struct rockchip_sfc *sfc,
> + struct spi_mem *mem,
> + const struct spi_mem_op *op,
> + u32 len)
> +{
> + u32 ctrl = 0, cmd = 0;
> +
> + /* set CMD */
> + cmd = op->cmd.opcode;
> + ctrl |= ((op->cmd.buswidth >> 1) << SFC_CTRL_CMD_BITS_SHIFT);
> +
> + /* set ADDR */
> + if (op->addr.nbytes) {
> + if (op->addr.nbytes == 4) {
> + cmd |= SFC_CMD_ADDR_32BITS << SFC_CMD_ADDR_SHIFT;
> + } else if (op->addr.nbytes == 3) {
> + cmd |= SFC_CMD_ADDR_24BITS << SFC_CMD_ADDR_SHIFT;
> + } else {
> + cmd |= SFC_CMD_ADDR_XBITS << SFC_CMD_ADDR_SHIFT;
> + writel_relaxed(op->addr.nbytes * 8 - 1, sfc->regbase + SFC_ABIT);
> + }
> +
> + ctrl |= ((op->addr.buswidth >> 1) << SFC_CTRL_ADDR_BITS_SHIFT);
> + }
> +
> + /* set DUMMY */
> + if (op->dummy.nbytes) {
> + if (op->dummy.buswidth == 4)
> + cmd |= op->dummy.nbytes * 2 << SFC_CMD_DUMMY_SHIFT;
> + else if (op->dummy.buswidth == 2)
> + cmd |= op->dummy.nbytes * 4 << SFC_CMD_DUMMY_SHIFT;
> + else
> + cmd |= op->dummy.nbytes * 8 << SFC_CMD_DUMMY_SHIFT;
> + }
> +
> + /* set DATA */
> + if (sfc->version >= SFC_VER_4) /* Clear it if no data to transfer */
> + writel(len, sfc->regbase + SFC_LEN_EXT);
> + else
> + cmd |= len << SFC_CMD_TRAN_BYTES_SHIFT;
> + if (len) {
> + if (op->data.dir == SPI_MEM_DATA_OUT)
> + cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
> +
> + ctrl |= ((op->data.buswidth >> 1) << SFC_CTRL_DATA_BITS_SHIFT);
> + }
> + if (!len && op->addr.nbytes)
> + cmd |= SFC_CMD_DIR_WR << SFC_CMD_DIR_SHIFT;
> +
> + /* set the Controller */
> + ctrl |= SFC_CTRL_PHASE_SEL_NEGETIVE;
> + cmd |= mem->spi->chip_select << SFC_CMD_CS_SHIFT;
> +
> + dev_dbg(sfc->dev, "addr.nbytes=%x(x%d) dummy.nbytes=%x(x%d)\n",
> + op->addr.nbytes, op->addr.buswidth,
> + op->dummy.nbytes, op->dummy.buswidth);
> + dev_dbg(sfc->dev, "ctrl=%x cmd=%x addr=%llx len=%x\n",
> + ctrl, cmd, op->addr.val, len);
> +
> + writel(ctrl, sfc->regbase + SFC_CTRL);
> + writel(cmd, sfc->regbase + SFC_CMD);
> + if (op->addr.nbytes)
> + writel(op->addr.val, sfc->regbase + SFC_ADDR);
> +
> + return 0;
> +}
> +
> +static int rockchip_sfc_write_fifo(struct rockchip_sfc *sfc, const u8 *buf, int len)
> +{
> + u8 bytes = len & 0x3;
Since len now comes from the op->data.nbytes it's already in bytes right?
> + u32 dwords;
> + int tx_level;
> + u32 write_words;
> + u32 tmp = 0;
> +
> + dwords = len >> 2;
> + while (dwords) {
> + tx_level = rockchip_sfc_wait_fifo_ready(sfc, SFC_CMD_DIR_WR, HZ);
> + if (tx_level < 0)
> + return tx_level;
> + write_words = min_t(u32, tx_level, dwords);
> + iowrite32_rep(sfc->regbase + SFC_DATA, buf, write_words);
> + buf += write_words << 2;
> + dwords -= write_words;
> + }
> +
> + /* write the rest non word aligned bytes */
> + if (bytes) {
> + tx_level = rockchip_sfc_wait_fifo_ready(sfc, SFC_CMD_DIR_WR, HZ);
> + if (tx_level < 0)
> + return tx_level;
> + memcpy(&tmp, buf, bytes);
> + writel(tmp, sfc->regbase + SFC_DATA);
> + }
> +
> + return len;
> +}
> +
> +static int rockchip_sfc_read_fifo(struct rockchip_sfc *sfc, u8 *buf, int len)
> +{
> + u8 bytes = len & 0x3;
> + u32 dwords;
> + u8 read_words;
> + int rx_level;
> + int tmp;
> +
> + /* word aligned access only */
> + dwords = len >> 2;
> + while (dwords) {
> + rx_level = rockchip_sfc_wait_fifo_ready(sfc, SFC_CMD_DIR_RD, HZ);
> + if (rx_level < 0)
> + return rx_level;
> + read_words = min_t(u32, rx_level, dwords);
> + ioread32_rep(sfc->regbase + SFC_DATA, buf, read_words);
> + buf += read_words << 2;
> + dwords -= read_words;
> + }
> +
> + /* read the rest non word aligned bytes */
> + if (bytes) {
> + rx_level = rockchip_sfc_wait_fifo_ready(sfc, SFC_CMD_DIR_RD, HZ);
> + if (rx_level < 0)
> + return rx_level;
> + tmp = readl_relaxed(sfc->regbase + SFC_DATA);
> + memcpy(buf, &tmp, bytes);
> + }
> +
> + return len;
> +}
> +
> +static int rockchip_sfc_fifo_transfer_dma(struct rockchip_sfc *sfc, dma_addr_t dma_buf, size_t len)
> +{
> + u32 reg;
> + int err = 0;
> +
> + init_completion(&sfc->cp);
> +
> + writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
> +
> + /* Enable transfer complete interrupt */
> + reg = readl(sfc->regbase + SFC_IMR);
> + reg &= ~SFC_IMR_DMA;
> + writel(reg, sfc->regbase + SFC_IMR);
> + writel((u32)dma_buf, sfc->regbase + SFC_DMA_ADDR);
> + writel(0x1, sfc->regbase + SFC_DMA_TRIGGER);
> +
> + /* Wait for the interrupt. */
> + if (!wait_for_completion_timeout(&sfc->cp, msecs_to_jiffies(2000))) {
> + dev_err(sfc->dev, "DMA wait for transfer finish timeout\n");
> + err = -ETIMEDOUT;
> + }
> +
> + writel(0xFFFFFFFF, sfc->regbase + SFC_ICLR);
> + /* Disable transfer finish interrupt */
> + reg = readl(sfc->regbase + SFC_IMR);
> + reg |= SFC_IMR_DMA;
> + writel(reg, sfc->regbase + SFC_IMR);
> +
> + return len;
> +}
> +
> +static int rockchip_sfc_xfer_data_poll(struct rockchip_sfc *sfc,
> + const struct spi_mem_op *op, u32 len)
> +{
> + dev_dbg(sfc->dev, "xfer_poll len=%x\n", len);
> +
> + if (op->data.dir == SPI_MEM_DATA_OUT)
> + return rockchip_sfc_write_fifo(sfc, op->data.buf.out, len);
> + else
> + return rockchip_sfc_read_fifo(sfc, op->data.buf.in, len);
> +}
> +
> +static int rockchip_sfc_xfer_data_dma(struct rockchip_sfc *sfc,
> + const struct spi_mem_op *op, u32 len)
> +{
> + int ret;
> +
> + dev_dbg(sfc->dev, "xfer_dma len=%x\n", len);
> +
> + if (op->data.dir == SPI_MEM_DATA_OUT) {
> + memcpy_toio(sfc->buffer, op->data.buf.out, len);
> + ret = rockchip_sfc_fifo_transfer_dma(sfc, sfc->dma_buffer, len);
> + } else {
> + ret = rockchip_sfc_fifo_transfer_dma(sfc, sfc->dma_buffer, len);
> + memcpy_fromio(op->data.buf.in, sfc->buffer, len);
> + }
> +
> + return ret;
> +}
> +
> +static int rockchip_sfc_xfer_done(struct rockchip_sfc *sfc, u32 timeout_us)
> +{
> + int ret = 0;
> + u32 status;
> +
> + ret = readl_poll_timeout(sfc->regbase + SFC_SR, status,
> + !(status & SFC_SR_IS_BUSY),
> + 20, timeout_us);
> + if (ret) {
> + dev_err(sfc->dev, "wait sfc idle timeout\n");
> + rockchip_sfc_reset(sfc);
> +
> + ret = -EIO;
> + }
> +
> + return ret;
> +}
> +
> +static int rockchip_sfc_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +{
> + struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
> + u32 len = op->data.nbytes;
> + int ret;
> +
> + if (unlikely(mem->spi->max_speed_hz != sfc->frequency)) {
> + ret = clk_set_rate(sfc->clk, mem->spi->max_speed_hz);
> + if (ret)
> + return ret;
> + sfc->frequency = mem->spi->max_speed_hz;
> + dev_dbg(sfc->dev, "set_freq=%dHz real_freq=%ldHz\n",
> + sfc->frequency, clk_get_rate(sfc->clk));
> + }
> +
> + rockchip_sfc_adjust_op_work((struct spi_mem_op *)op);
> +
> + rockchip_sfc_xfer_setup(sfc, mem, op, len);
> + if (len) {
> + if (likely(sfc->use_dma) && !(len & 0x3) && len >= SFC_DMA_TRANS_THRETHOLD)
len here is in bytes, but the poll function takes it in bits right? I
think the DMA function works in bytes.
> + ret = rockchip_sfc_xfer_data_dma(sfc, op, len);
> + else
> + ret = rockchip_sfc_xfer_data_poll(sfc, op, len);
> +
> + if (ret != len) {
> + dev_err(sfc->dev, "xfer data failed ret %d dir %d\n", ret, op->data.dir);
> +
> + return -EIO;
> + }
> + }
> +
> + return rockchip_sfc_xfer_done(sfc, 100000);
> +}
> +
> +static int rockchip_sfc_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
> +{
> + struct rockchip_sfc *sfc = spi_master_get_devdata(mem->spi->master);
> +
> + op->data.nbytes = min(op->data.nbytes, sfc->max_iosize);
> +
> + return 0;
> +}
> +
> +static const struct spi_controller_mem_ops rockchip_sfc_mem_ops = {
> + .exec_op = rockchip_sfc_exec_mem_op,
> + .adjust_op_size = rockchip_sfc_adjust_op_size,
> +};
> +
> +static irqreturn_t rockchip_sfc_irq_handler(int irq, void *dev_id)
> +{
> + struct rockchip_sfc *sfc = dev_id;
> + u32 reg;
> +
> + reg = readl(sfc->regbase + SFC_RISR);
> +
> + /* Clear interrupt */
> + writel_relaxed(reg, sfc->regbase + SFC_ICLR);
> +
> + if (reg & SFC_RISR_DMA)
> + complete(&sfc->cp);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int rockchip_sfc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct spi_master *master;
> + struct resource *res;
> + struct rockchip_sfc *sfc;
> + int ret;
> +
> + master = devm_spi_alloc_master(&pdev->dev, sizeof(*sfc));
> + if (!master)
> + return -ENOMEM;
> +
> + master->mem_ops = &rockchip_sfc_mem_ops;
> + master->dev.of_node = pdev->dev.of_node;
> + master->mode_bits = SPI_TX_QUAD | SPI_TX_DUAL | SPI_RX_QUAD | SPI_RX_DUAL;
> + master->min_speed_hz = SFC_MIN_SPEED_HZ;
> + master->max_speed_hz = SFC_MAX_SPEED_HZ;
> + master->num_chipselect = SFC_MAX_CHIPSELECT_NUM;
> +
> + sfc = spi_master_get_devdata(master);
> + sfc->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + sfc->regbase = devm_ioremap_resource(dev, res);
> + if (IS_ERR(sfc->regbase))
> + return PTR_ERR(sfc->regbase);
> +
> + sfc->clk = devm_clk_get(&pdev->dev, "clk_sfc");
> + if (IS_ERR(sfc->clk)) {
> + dev_err(&pdev->dev, "Failed to get sfc interface clk\n");
> + return PTR_ERR(sfc->clk);
> + }
> +
> + sfc->hclk = devm_clk_get(&pdev->dev, "hclk_sfc");
> + if (IS_ERR(sfc->hclk)) {
> + dev_err(&pdev->dev, "Failed to get sfc ahb clk\n");
> + return PTR_ERR(sfc->hclk);
> + }
> +
> + sfc->use_dma = !of_property_read_bool(sfc->dev->of_node,
> + "rockchip,sfc-no-dma");
> +
> + if (sfc->use_dma) {
> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_warn(dev, "Unable to set dma mask\n");
> + return ret;
> + }
> +
> + sfc->buffer = dmam_alloc_coherent(dev, SFC_MAX_IOSIZE_VER3,
> + &sfc->dma_buffer,
> + GFP_KERNEL);
> + if (!sfc->buffer)
> + return -ENOMEM;
> + }
> +
> + ret = clk_prepare_enable(sfc->hclk);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable ahb clk\n");
> + goto err_hclk;
> + }
> +
> + ret = clk_prepare_enable(sfc->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable interface clk\n");
> + goto err_clk;
> + }
> +
> + /* Find the irq */
> + ret = platform_get_irq(pdev, 0);
> + if (ret < 0) {
> + dev_err(dev, "Failed to get the irq\n");
> + goto err_irq;
> + }
> +
> + ret = devm_request_irq(dev, ret, rockchip_sfc_irq_handler,
> + 0, pdev->name, sfc);
> + if (ret) {
> + dev_err(dev, "Failed to request irq\n");
> +
> + return ret;
> + }
> +
> + ret = rockchip_sfc_init(sfc);
> + if (ret)
> + goto err_irq;
> +
> + sfc->max_iosize = rockchip_sfc_get_max_iosize(sfc);
> + sfc->version = rockchip_sfc_get_version(sfc);
> +
> + ret = spi_register_master(master);
> + if (ret)
> + goto err_irq;
> +
> + return 0;
> +
> +err_irq:
> + clk_disable_unprepare(sfc->clk);
> +err_clk:
> + clk_disable_unprepare(sfc->hclk);
> +err_hclk:
> + return ret;
> +}
> +
> +static int rockchip_sfc_remove(struct platform_device *pdev)
> +{
> + struct spi_master *master = platform_get_drvdata(pdev);
> + struct rockchip_sfc *sfc = platform_get_drvdata(pdev);
> +
> + spi_unregister_master(master);
> +
> + clk_disable_unprepare(sfc->clk);
> + clk_disable_unprepare(sfc->hclk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rockchip_sfc_dt_ids[] = {
> + { .compatible = "rockchip,sfc"},
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rockchip_sfc_dt_ids);
> +
> +static struct platform_driver rockchip_sfc_driver = {
> + .driver = {
> + .name = "rockchip-sfc",
> + .of_match_table = rockchip_sfc_dt_ids,
> + },
> + .probe = rockchip_sfc_probe,
> + .remove = rockchip_sfc_remove,
> +};
> +module_platform_driver(rockchip_sfc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Rockchip Serial Flash Controller Driver");
> +MODULE_AUTHOR("Shawn Lin <shawn.lin@...k-chips.com>");
> +MODULE_AUTHOR("Chris Morgan <macromorgan@...mail.com>");
> +MODULE_AUTHOR("Jon Lin <Jon.lin@...k-chips.com>");
> --
> 2.17.1
>
>
>
Powered by blists - more mailing lists