| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.21.2106100203510.5469@angie.orcam.me.uk>
Date: Thu, 10 Jun 2021 20:39:03 +0200 (CEST)
From: "Maciej W. Rozycki" <macro@...am.me.uk>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/4] serial: 8250: Correct the clock for OxSemi PCIe
devices
Oxford Semiconductor PCIe (Tornado) serial port devices are driven by a
fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.
In the enhanced (650) mode, which we select in `autoconfig_has_efr' by
setting the ECB bit in the EFR register, and in the absence of clock
reconfiguration, which we currently don't do, the clock rate is divided
only by the oversampling rate of 16 as it is supplied to the baud rate
generator, yielding the baud base of 3906250. This comes from the reset
values of the TCR and MCR[7] registers which are both zero[1][2][3][4],
choosing the oversampling rate of 16 and the normal (divide by 1) baud
rate generator prescaler respectively. This is the rate that is divided
by the value held in the divisor latch to determine the baud rate used.
Replace the incorrect baud base of 4000000 with the right value of
3906250 then.
References:
[1] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor,
Inc., DS-0045, 10 Nov 2008, Section "Reset Configuration", p. 72
[2] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "Reset
Configuration", p. 27
[3] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford
Semiconductor, Inc., DS-0047, Feb 08, Section "Reset Configuration",
p. 28
[4] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford
Semiconductor, Inc., DS-0048, Feb 08, Section "Reset Configuration",
p. 28
Signed-off-by: Maciej W. Rozycki <macro@...am.me.uk>
Fixes: 7106b4e333bae ("8250: Oxford Semiconductor Devices")
---
drivers/tty/serial/8250/8250_pci.c | 128 ++++++++++++++++++-------------------
1 file changed, 64 insertions(+), 64 deletions(-)
linux-serial-8250-oxsemi-pcie-clock.diff
Index: linux-malta-cbus-uart/drivers/tty/serial/8250/8250_pci.c
===================================================================
--- linux-malta-cbus-uart.orig/drivers/tty/serial/8250/8250_pci.c
+++ linux-malta-cbus-uart/drivers/tty/serial/8250/8250_pci.c
@@ -2851,7 +2851,7 @@ enum pci_board_num_t {
pbn_b0_2_1843200,
pbn_b0_4_1843200,
- pbn_b0_1_4000000,
+ pbn_b0_1_3906250,
pbn_b0_bt_1_115200,
pbn_b0_bt_2_115200,
@@ -2931,10 +2931,10 @@ enum pci_board_num_t {
pbn_plx_romulus,
pbn_endrun_2_4000000,
pbn_oxsemi,
- pbn_oxsemi_1_4000000,
- pbn_oxsemi_2_4000000,
- pbn_oxsemi_4_4000000,
- pbn_oxsemi_8_4000000,
+ pbn_oxsemi_1_3906250,
+ pbn_oxsemi_2_3906250,
+ pbn_oxsemi_4_3906250,
+ pbn_oxsemi_8_3906250,
pbn_intel_i960,
pbn_sgi_ioc3,
pbn_computone_4,
@@ -3081,10 +3081,10 @@ static struct pciserial_board pci_boards
.uart_offset = 8,
},
- [pbn_b0_1_4000000] = {
+ [pbn_b0_1_3906250] = {
.flags = FL_BASE0,
.num_ports = 1,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 8,
},
@@ -3479,31 +3479,31 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
- [pbn_oxsemi_1_4000000] = {
+ [pbn_oxsemi_1_3906250] = {
.flags = FL_BASE0,
.num_ports = 1,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
- [pbn_oxsemi_2_4000000] = {
+ [pbn_oxsemi_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
- [pbn_oxsemi_4_4000000] = {
+ [pbn_oxsemi_4_3906250] = {
.flags = FL_BASE0,
.num_ports = 4,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
- [pbn_oxsemi_8_4000000] = {
+ [pbn_oxsemi_8_3906250] = {
.flags = FL_BASE0,
.num_ports = 8,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
@@ -4510,158 +4510,158 @@ static const struct pci_device_id serial
*/
{ PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_1_4000000 },
+ pbn_b0_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_oxsemi_2_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_oxsemi_2_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
+ pbn_oxsemi_4_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
+ pbn_oxsemi_4_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
+ pbn_oxsemi_8_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
+ pbn_oxsemi_8_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
/*
* Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
*/
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_oxsemi_1_3906250 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_oxsemi_2_3906250 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
- pbn_oxsemi_4_4000000 },
+ pbn_oxsemi_4_3906250 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
- pbn_oxsemi_8_4000000 },
+ pbn_oxsemi_8_3906250 },
/*
* Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
*/
{ PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_oxsemi_2_3906250 },
/*
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
Powered by blists - more mailing lists