lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 9 Jun 2021 21:54:38 -0500 From: Rob Herring <robh@...nel.org> To: Joakim Zhang <qiangqing.zhang@....com> Cc: davem@...emloft.net, kuba@...nel.org, andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk, f.fainelli@...il.com, Jisheng.Zhang@...aptics.com, linux-imx@....com, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH V3 net-next 1/4] dt-bindings: net: add dt binding for realtek rtl82xx phy On Tue, Jun 08, 2021 at 11:15:32AM +0800, Joakim Zhang wrote: > Add binding for realtek rtl82xx phy. > > Signed-off-by: Joakim Zhang <qiangqing.zhang@....com> > --- > .../bindings/net/realtek,rtl82xx.yaml | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > > diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > new file mode 100644 > index 000000000000..bb94a2388520 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Realtek RTL82xx PHY > + > +maintainers: > + - Andrew Lunn <andrew@...n.ch> > + - Florian Fainelli <f.fainelli@...il.com> > + - Heiner Kallweit <hkallweit1@...il.com> > + > +description: > + Bindings for Realtek RTL82xx PHYs > + > +allOf: > + - $ref: ethernet-phy.yaml# > + > +properties: > + realtek,clkout-disable: > + type: boolean > + description: > + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. > + > + Extra blank line. > + realtek,aldps-enable: > + type: boolean > + description: > + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. > + > +unevaluatedProperties: false > + > +examples: > + - | > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy1: ethernet-phy@1 { > + reg = <1>; > + realtek,clkout-disable; > + realtek,aldps-enable; The schema here will never be applied because there is nothing to match on to determine which nodes it is valid. This should have a compatible (because ethernet phys are not special). Rob
Powered by blists - more mailing lists